Path:
Home >
JJ >
Page28 > JJG 614-2004
Price & Delivery
US$599.00 · In stock · Download in 9 secondsJJG 614-2004: Verification Regulation of Secondary Standard Mercury Barometers
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See
step-by-step procedureStatus: Obsolete
JJG 614: Historical versions
| Std ID | Version | USD | Buy | Deliver [PDF] in | Title (Description) |
| JJG 614-2004 | English | 599 |
Add to Cart
|
3 days [Need to translate]
|
Verification Regulation of Secondary Standard Mercury Barometers
|
| JJG 614-1989 | English | 359 |
Add to Cart
|
3 days [Need to translate]
|
Verification Regulation of Secondary Standard Mercury Barometer
|
Click to Preview a similar PDF
Basic data
| Standard ID | JJG 614-2004 (JJG614-2004) |
| Description (Translated English) | Verification Regulation of Secondary Standard Mercury Barometers |
| Sector / Industry | Metrology & Measurement Industry Standard |
| Classification of Chinese Standard | A53 |
| Classification of International Standard | 17.100 |
| Word Count Estimation | 15,174 |
| Date of Issue | 2004-09-21 |
| Date of Implementation | 2005-03-21 |
| Older Standard (superseded by this standard) | JJG 614-1989 |
| Quoted Standard | 2004 technical regulations issued by national metrology (industrial measurement 2005 Volume 15, Issue 1) |
| Regulation (derived from) | 2004 technical regulations issued by national metrology (industrial measurement 2005 Volume 15, Issue 1) |
| Issuing agency(ies) | State Administration of Quality Supervision, Inspection and Quarantine |
| Summary | This standard applies to second-class standard mercury barometer (hereinafter referred to as the standard barometer) of the initial verification, testing and use of follow-up inspection. |
JJG 614-2004: Verification Regulation of Secondary Standard Mercury Barometers
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Verification Regulation of Secondary Standard Mercury Barometers
National Metrology Verification Regulations of the People's Republic
Second-class standard mercury barometer
Released on.2004-09-21
2005-03-21 implementation
The General Administration of Quality Supervision, Inspection and Quarantine issued
Second-class standard mercury barometer verification procedure
StandardMercury
Barometers
Replace JJG 614-1989
This regulation was approved by the General Administration of Quality Supervision, Inspection and Quarantine on September 21,.2004, and
It will take effect on March 21,.2005.
Focal Point. National Pressure Measurement Technical Committee
Main drafting unit. National Meteorological Station
This regulation entrusts the National Pressure Measurement Technical Committee to explain
The main drafters of this procedure.
Lu Wenhua (National Meteorological Station)
Li Jianying (National Meteorological Station)
Chang Shicong (National Meteorological Station)
Participate in the drafters.
Wang Cheng (National Meteorological Station)
table of Contents
1 Scope (1)
2 Terms and units of measurement (1)
2.1 Tube pressure drop (1)
2.2 Air leak rate (1)
3 Overview (1)
4 Metrology performance requirements (1)
5 General technical requirements (1)
5.1 Appearance (1)
5.2 Vacuum degree (2)
5.3 Mercury (2)
6 measuring instrument control (2)
6.1 Verification conditions (2)
6.2 Verification project (2)
6.3 Verification method (2)
6.4 Verification result processing (5)
6.5 verification period (5)
Appendix A Zero Adjustment Method (6)
Appendix B Threshold g0 (n, α) (7)
Appendix C Standard Mercury Barometer Calibration Record (8)
Appendix D Verification Certificate (inside page) format (9)
Appendix E Format of the verification result (inside page) format (10)
Second-class standard mercury barometer verification procedure
1 Scope
This procedure is applicable to the first verification and subsequent verification of the second-class standard mercury barometer (hereinafter referred to as the standard barometer).
And in-use inspection.
2 terms and units of measure
2.1 tube pressure drop
The pressure differential value of the pipe is the standard pressure output port and the standard mercury barometer.
The pressure difference between the sensing surfaces, in hPa.
2.2 Air leak rate
The rate of leakage (rateoftheleakgas) is the amount of change in pressure per unit time due to leakage. Unit.
hPa·min-1.
3 Overview
The standard barometer measures the atmospheric pressure by the principle that the gravity of the mercury column in the vacuum glass tube is balanced with the atmospheric pressure.
Forceful. Standard barometers are used for the measurement of atmospheric pressure and the transfer of values. Standard barometer types are classified into plain and high
prototype.
4 Metrological performance requirements
The corrected value of the measured pressure value of the standard barometer does not exceed ±0.30hPa, and the measured pressure value is corrected to the maximum allowable value.
The error is ±0.20 hPa.
5 General technical requirements
5.1 Appearance
5.1.1 The inner tube of the glass shall be straight and the inner wall shall be smooth and clean, and there shall be no shortage of bubbles, gas wires and stones that may affect the measurement.
The trap should be uniform and the inner diameter should be uniform. The centerline of the upper working section and the lower working section should be coaxial with the centerline of the outer casing.
5.1.2 The ruler line should be clear, the index should be even, and the color should be firm.
The main ruler should match the vernier ruler. The vernier ruler when the zero line of the vernier is aligned with any reticle on the main ruler
The tail line should be aligned with the corresponding score line on the main ruler.
5.1.3 The movement of the vernier scale adjustment mechanism should be flexible and stable, and can stay at any position without loosening or scratching.
Outer tube.
The vernier scale should not swing when you rotate the trim nut. After the adjustment is stopped, there must be no displacement. Ruler support and zero
The front and rear edges of the bit window should be flat and in a plane perpendicular to the axis of the outer casing.
5.1.4 The metal outer casing should be straight. The front and rear window holes should be parallel to each other, and the axis of the line and the outer sleeve should be the same
In-plane.
...
Tips & Frequently Asked Questions:
Question 1: How long will the true-PDF of JJG 614-2004_English be delivered?
Answer: Upon your order, we will start to translate JJG 614-2004_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.
Question 2: Can I share the purchased PDF of JJG 614-2004_English with my colleagues?
Answer: Yes. The purchased PDF of JJG 614-2004_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.
Question 3: Does the price include tax/VAT?
Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs):
List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?
Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
Question 5: Should I purchase the latest version JJG 614-2004?
Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version JJG 614-2004 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
