Path:
Home >
GB/T >
Page12 > GB/T 6232-2021
Price & Delivery
US$114.00 · In stock · Download in 9 secondsGB/T 6232-2021: Tractors and machinery for agriculture and forestry - Wheel-to-hub fixing dimensions
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See
step-by-step procedureStatus: Valid
GB/T 6232: Historical versions
| Std ID | Version | USD | Buy | Deliver [PDF] in | Title (Description) |
| GB/T 6232-2021 | English | 114 |
Add to Cart
|
3 days [Need to translate]
|
Tractors and machinery for agriculture and forestry - Wheel-to-hub fixing dimensions
|
| GB/T 6232-1998 | English | 239 |
Add to Cart
|
3 days [Need to translate]
|
Tractors and machinery for agriculture and forestry. Wheel-to-hub fixing dimensions
|
| GB/T 6232-1986 | English | RFQ |
ASK
|
3 days [Need to translate]
|
Tractors and machinery for agriculture and forestry wheel fixing on hub--Dimensional characteristics
|
Click to Preview a similar PDF
Basic data
| Standard ID | GB/T 6232-2021 (GB/T6232-2021) |
| Description (Translated English) | Tractors and machinery for agriculture and forestry - Wheel-to-hub fixing dimensions |
| Sector / Industry | National Standard (Recommended) |
| Classification of Chinese Standard | T64 |
| Word Count Estimation | 7,717 |
| Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration |
GB/T 6232-2021: Tractors and machinery for agriculture and forestry - Wheel-to-hub fixing dimensions
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Tractors and machinery for agriculture and forestry-Wheel-to-hub fixing dimensions
ICS 65.060.10
T64
National Standards of People's Republic of China
Replace GB/T 6232-1998
Agriculture and forestry tractors and machinery
Mounting dimensions of the wheel on the hub
(ISO 5711.1995, IDT)
Released on 2021-04-30
2021-11-01 implementation
State Administration of Market Supervision and Administration
Issued by the National Standardization Management Committee
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB/T 6232-1998 "Installation Dimensions of Agricultural and Forestry Tractors and Machinery Wheels on Wheel Hubs". With GB/T 6232-
Compared with.1998, the main technical differences except for editorial changes are as follows.
---Modified the scope of the standard (see Chapter 1, Chapter 1 of the.1998 edition);
--- Deleted the requirements for the position of the radius SR of the sphere of the nut seat centered on the sphere of the spoke nut seat (see Table 3 in the.1998 edition);
---The diameter of the bolt with the number of equal-spaced bolt holes centered on the cone of the spoke nut seat is 8 (see A.2, Table 2 of the.1998 edition).
The translation method used in this standard is equivalent to ISO 5711.1995 "Agricultural and Forestry Tractor and Mechanical Wheel Mounting Dimensions on the Wheel Hub".
This standard has made the following editorial changes.
---In order to be consistent with my country's drawing regulations, the letter "d" is replaced by the letter "D", and the letter "sr", "SRr" and "r" are replaced by the letter "SR";
---In order to comply with the provisions of GB/T 1.1-2009, the content of "Note 3" in Appendix A of ISO 5711.1995 is changed to A.1.
No. postponed.
This standard was proposed by the China Machinery Industry Federation.
This standard is under the jurisdiction of the National Tractor Standardization Technical Committee (SAC/TC140).
Drafting organizations of this standard. Luoyang Xiyuan Vehicle and Power Inspection Institute Co., Ltd., Hefei Fuyuan Automobile Modification Co., Ltd., Jiamusiji
Chi Tractor Manufacturing Co., Ltd., Changzhou Dongfeng Agricultural Machinery Group Co., Ltd.
The main drafters of this standard. Li Jingzhong, Jiao Changao, Lu Feng, Zou Yingjie, Suo Jingkun, Liu Benhu, Zhai Guoqing, Zhu Guoyuan, Shang Xiangsheng.
The previous editions of the standard replaced by this standard are as follows.
---GB/T 6232-1998.
Agriculture and forestry tractors and machinery
Mounting dimensions of the wheel on the hub
1 Scope
This standard specifies the installation dimensions of agricultural and forestry tractors and machinery wheels on the hubs. Centering according to the spoke center hole is recommended as a new model
Type.
Note. Appendix A gives the installation dimensions of the wheel on the hub according to the spherical centering and conical centering of the spoke nut seat.
The following installation dimensions do not mean that the wheels are interchangeable between the vehicle and the vehicle.
This standard applies to agricultural and forestry tractors and mechanical spoke wheels, but does not apply to front and rear wheels equipped with gear reducers and corresponding mechanisms in the hub.
Wheels assembled on the rear drive shaft.
2 symbols
The following symbols apply to this document.
Symbolic name
D Nut seat diameter
D1 Bolt hole/nut seat distribution circle diameter
D2 Bolt hole diameter
D3 Center hole diameter
D4 spoke support plane diameter
D5 Hub center shoulder diameter
D6 Hub support plane diameter
SR spherical radius
3 Installation dimensions of the center hole of the spokes
The assembly dimensions centered on the spoke center hole should meet the requirements of Table 1 and Figure 1.
Table 1 Dimensions of spoke wheels and hubs with center holes centered in millimeters
Isometric screw
Number of bolt holes
wheel
D1 D2 1 0 D3 0.5 0 D4min
Bolt diameter a
Wheel hub
D5 0-0.2 D6 0-5
4 100 15 61 145 12 60.8 140
5 140 17 96 185 14 95.8 180
6 205 21 161 255 18 160.8 250
203.2 21 152.4 257 18 152.2 252
275 24 221 325 20 220.8 320
...
