Path: Home > GB/T > Page594 > GB/T 45999.2-2025

Price & Delivery

US$274.00 · In stock · Download in 9 seconds
GB/T 45999.2-2025: Dentistry - Dental furnace - Part 2: Test method for evaluation of furnace programme via firing glaze
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid

Std ID	Version	USD	Buy	Deliver [PDF] in	Title (Description)
GB/T 45999.2-2025	English	274	Add to Cart	3 days [Need to translate]	Dentistry - Dental furnace - Part 2: Test method for evaluation of furnace programme via firing glaze

GB/T 45999.2-2025: Dentistry - Dental furnace - Part 2: Test method for evaluation of furnace programme via firing glaze

---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT45999.2-2025
ICS 11.060.20 CCSC33 National Standard of the People's Republic of China Dentistry Dental sintering furnaces Part 2. Test method for programming firing furnaces for glaze firing evaluation Dentistry-Dentalfurnace-Part 2. (ISO 13078-2.2016, IDT) Released on August 1, 2025 Implementation on August 1, 2026 State Administration for Market Regulation The National Standardization Administration issued

Table of Contents

Preface III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Test Method 2 5 Test Report 6 Preface This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document is Part 2 of GB/T 45999 Dental Sintering Furnaces. GB/T 45999 has been published in the following parts. --- Part 2.Test method for sintering furnace program design for glaze firing evaluation. This document is equivalent to ISO 13078-2.2016 “Dentistry — Dental sintering furnaces — Part 2.Evaluation of glaze firing — Sintering furnace program design” Test Methods for Design. Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document is proposed by the State Food and Drug Administration. This document is under the jurisdiction of the National Technical Committee for Standardization of Dental Materials and Instruments (SAC/TC99). This document was drafted by. Oral Medical Device Testing Center, Peking University School of Stomatology, and Shenzhen Aierchuang Dental Technology Co., Ltd. The main drafters of this document are. Deng Xuliang, Zhang Xuehui, Xu Yongxiang, Yuan Shenpo, Wu Yang, Zhai Qian, Yu Lanlan, and Han Chengwei.

introduction

Dental sintering furnaces are suitable for making dental metal porcelain restorations, and some dental sintering furnaces are also suitable for all-ceramic restorations. The furnace is used to fire or sinter dental opaque porcelain, dentin porcelain and enamel porcelain onto the base material. The process temperature is 600℃~1000℃. Different calibration procedures used by dental sintering furnace manufacturers and the different types of dental sintering furnaces currently on the market will affect Sintering results. Although different dental sintering furnaces may have the same digital external display, when processing the same ceramic under otherwise similar conditions, the firing The degree of knotting can identify different results. Different sintering degrees will not only produce differences that can be directly judged by the human eye (such as color and transparency), but also produce deviations that cannot be detected by the human eye. For example, the linear thermal expansion coefficient, bonding strength, strength value and acid solubility. These changes may lead to the aesthetics of dental ceramic restorations. changes and clinical failures (e.g., rupture). GB/T 45999 “Dentistry - Dental sintering furnaces” is intended to consist of three parts. --- Part 1.Test method for temperature measurement using independent thermocouples. The purpose is to specify a test method for calibrating dental furnaces. This test method is applicable to the testing of silica-based dental ceramic restorations in the temperature range of 600℃~1050℃. Heat treatment. --- Part 2.Test method for design of firing furnace program for evaluation of glaze firing. The purpose is to describe a method for determining the glaze firing test. The test method of sample sintering degree to adapt the firing procedure of dental sintering furnace to a certain dental ceramics stipulates the test method of sample sintering degree to adapt the firing procedure of dental sintering furnace to a certain dental ceramics The degree of sintering achieved. --- Part 3.Test method for evaluating high temperature sintering furnace measurements using independent thermocouples. The purpose is to specify the calibration resistance heating Test methods for high-temperature sintering furnaces suitable for sintering dental restorations in the temperature range up to 1700°C. Dentistry Dental sintering furnaces Part 2. Test method for programming firing furnaces for glaze firing evaluation

1 Scope

This document specifies the degree of sintering achieved by the user. It describes a method for determining the degree of sintering of sintered specimens to achieve the desired result. The firing schedule of the furnace is adapted to the test method of certain dental ceramics. This document applies to Type I dental ceramic powders that comply with ISO 6872.This test method evaluates the sintering degree of dental ceramics. Monitoring the temperature control of dental sintering furnaces. This document is also suitable for evaluating the reproducibility of firing in dental sintering furnaces or for comparing several dental sintering furnaces. The furnace is formed.

2 Normative references

The contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. ISO 1942 Dentistry - Vocabulary Note. GB/T 9937-2020 Dental Terminology (ISO 1942.2020, MOD) ISO 2768-1 General tolerances - Part 1.Tolerances on linear and angular dimensions without separate tolerance indications Note. GB/T 1804-2000 General tolerances Tolerances for linear and angular dimensions without tolerance indication (eqv ISO 2768-1.1989) andtestmethods) Note. GB/T 6682-2008 Specifications and test methods for water used in analytical laboratories (ISO 3696.1987, MOD) ISO 6872 Dentistry-Ceramicmaterials Note. GB 30367-2025 Dental ceramic materials (ISO 6872.2024, IDT) ISO 9693 Dentistry - Compatibility tests for metal-ceramic and ceramic-ceramic systems ISO 13078 Dentistry - Dentalfurnace- Test method for temperature measurement using independent thermocouples

3 Terms and Definitions

For the purposes of this document, the terms and definitions defined in ISO 1942, ISO 6872, ISO 9693 and ISO 13078 and the following apply. The URLs for terminology databases used for standardization maintained by ISO and IEC are as follows. 3.1 sintering degree firingdegree The condition of the surface or edge of dental ceramics heat-treated according to defined sintering instructions, based on which relevant physical properties can be assessed visually. ...