Path: Home > GB/T > Page546 > GB/T 43505-2023

Price & Delivery

US$689.00 · In stock · Download in 9 seconds
GB/T 43505-2023: Ceramic lined tubing
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid

Std ID	Version	USD	Buy	Deliver [PDF] in	Title (Description)
GB/T 43505-2023	English	689	Add to Cart	6 days [Need to translate]	Ceramic lined tubing

GB/T 43505-2023: Ceramic lined tubing

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 75:180:10 CCSE92 National Standards of People's Republic of China Ceramic lined oil pipe Published on 2023-12-28 2024-04-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration Committee

Table of contents

Preface III 1 Scope 1 2 Normative references 1 3 Terms, definitions, symbols and abbreviations 2 3:1 Terms and definitions 2 3:2 Symbol 3 3:3 Abbreviations 3 4 Product form and materials 3 4:1 Product Structure 3 4:2 Port form 4 4:3 Connection form 4 4:4 Base pipe material requirements 5 4:5 Thermite material requirements 5 4:6 Material requirements for protective cap and CB ring 5 5 Manufacturing methods 5 5:1 Treatment of base pipe 5 5:2 CLT Manufacturing 6 5:3 Manufacturing of CB rings 6 5:4 Installation of CB ring 6 5:5 Upper coupling 6 5:6 Traceability 7 5:7 Purchaser’s Inspection 7 6 Performance requirements and inspection tests 7 6:1 Base tube 7 6:2 Ceramic lining 7 6:3 CLT 8 6:4 Additional performance tests11 6:5 CB ring test 13 6:6 Protective cap test 13 6:7 Inspection frequency and acceptance rules 14 7 records 14 7:1 Information provided by the purchaser14 7:2 Documentation provided by the manufacturer15 8 Marking, packaging, transportation and storage15 8:1 Flag 15 8:2 Packaging15 8:3 Transport15 8:4 Storage 16 9 Use and maintenance16 9:1 Data review16 9:2 Physical inspection16 9:3 Connection 16 9:4 starts out 17 9:5 Scraping and repair17 Appendix A (informative) Ceramic lining surface quality determination method 19 A:1 Principle 19 A:2 Equipment and Instruments19 A:3 Testing steps 19 Appendix B (normative) CLT specification and size requirements 20 Appendix C (informative) Determination method of ceramic lining thickness 23 C:1 Principle 23 C:2 Equipment and Instruments 23 C:3 Determination step 23 Appendix D (informative) Recommended make-up torque for CLT 24

Foreword

This document complies with the provisions of GB/T 1:1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents" Drafting: Please note that some content in this document may be subject to patents: The publisher of this document assumes no responsibility for identifying patents: This document is under the jurisdiction of the National Petroleum and Natural Gas Standardization Technical Committee (SAC/TC355): This document was drafted by: China Petroleum Corporation Engineering Materials Research Institute Co:, Ltd:, Jilin Province Dadu Tiansheng Cermet Technology Co:, Ltd: Company, China Building Materials Inspection and Certification Group Zibo Co:, Ltd:, China Petroleum Materials Co:, Ltd:, University of Science and Technology Beijing, China National Petroleum Corporation Co:, Ltd: Xinjiang Oilfield Branch, China National Petroleum Corporation Jilin Oilfield Branch, China National Petroleum Corporation Si Changqing Oilfield Branch, Chang'an University, Chinese People's Liberation Army Army Armored Forces Academy, China Petroleum & Chemical Corporation Shengli Oilfield branch: The main drafters of this document: Li Houbu, Wang Shouze, Zhang Xuemin, Wu Ping, Lin Tao, Qi Guoquan, Xu Ting, Yang Yongli, Fang Wei, Wei Shicheng, Li Hongwei, Zhang Zhichao, Qi Dongtao, Liang Yi, Guo Jianguang, Wang Zhan, Chen Wei, Wang Shouhu, Ye Qinyou, Jiang Xiaofeng, Zhou Hongbin: Ceramic lined oil pipe

1 Scope

This document specifies the product form and materials, manufacturing methods, and Performance requirements and inspection tests, records, marking, packaging, transportation, storage, use and maintenance: This document is applicable to the lifting and lifting of multi-phase fluids, hydrocarbon gases, hydrocarbon liquids and water under corrosion, wear, scaling, waxing and high temperature conditions: CLT for conveying: The CLT pipe diameter range applicable to this document is OD42:16mm ~ OD114:30mm, and the steel grades include H40, J55, and N801: Note: The basic process principle of the centrifugal self-propagating high-temperature synthesis method is to uniformly mix Fe2O3 (or Fe3O4) powder and aluminum powder in a certain proportion and put them into the oil pipe, and then fix them on On the centrifuge, after the centrifuge rotation reaches a certain value, the reactants are ignited and the large amount of reaction heat released by the stimulated redox reaction is used to maintain the reaction: Keep the reaction going quickly: The molten products separate from each other according to their different densities under the action of centrifugal force, and form CLT after cooling:

2 Normative reference documents

The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document: GB/T 2102 Acceptance, packaging, marking and quality certificate of steel pipes GB/T 2828:1 Enumeration sampling inspection procedures Part 1: Batch-by-batch inspection sampling plan retrieved by acceptance quality limit (AQL) GB/T 3850 Density determination method of dense sintered metal materials and cemented carbide GB/T 6804 Determination of radial crush strength of sintered metal bushings GB/T 7997 Vickers hardness test method for cemented carbide GB/T 8923:1-2011 Visual assessment of surface cleanliness of steel surface preparation before application of coatings Part 1: Uncoated The corrosion grade and treatment grade of the steel surface and the steel surface after the original coating has been completely removed GB/T 9253 Processing, measurement and inspection of casing, tubing and line pipe threads in the oil and gas industry GB/T 12606 Full-circumference automatic magnetic flux leakage detection of longitudinal and/or transverse defects in seamless and welded (except submerged arc welding) ferromagnetic steel pipes GB/T 14153-1993 General rules for drop weight impact test methods for rigid plastics GB/T 17745-2011 Maintenance and use of casing and tubing in the oil and gas industry GB/T 19830 Steel pipes for oil and gas well casing or tubing in the petroleum and natural gas industry GB/T 20972:2 Materials for hydrogen sulfide-containing environments in oil and gas extraction in the oil and gas industry Part 2: Anti-cracking carbon Steel, low alloy steel and cast iron GB/T 21267 Test procedures for threaded connections of casing and tubing in the oil and gas industry GB/T 23512 Evaluation and testing of thread grease for casing, tubing, line pipe and drill string components in the oil and gas industry GB/T 32552 Automatic full-circle ultrasonic thickness testing of seamless and welded steel pipes (except submerged arc welding) GB/T 39534 Method for determination of uniform corrosion rate of stainless steel and nickel-based alloys in corrosive liquids for metals and alloys ...