Path: Home > GB/T > Page499 > GB/T 42952.1-2023

Price & Delivery

US$464.00 · In stock · Download in 9 seconds
GB/T 42952.1-2023: Thermoplastics pipes for the conveyance of fluids - Dimensions and tolerances - Part 1: Metric series
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid

Std ID	Version	USD	Buy	Deliver [PDF] in	Title (Description)
GB/T 42952.1-2023	English	464	Add to Cart	4 days [Need to translate]	Thermoplastics pipes for the conveyance of fluids - Dimensions and tolerances - Part 1: Metric series

GB/T 42952.1-2023: Thermoplastics pipes for the conveyance of fluids - Dimensions and tolerances - Part 1: Metric series

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 83.140.30 CCSG33 National Standards of People's Republic of China Thermoplastic pipes for fluid transportation Dimensions and Tolerances Part 1.Metric Series (ISO 11922-1.2018,IDT) Published on 2023-08-06 2024-03-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration Committee

Foreword

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents" Drafting. This document is Part 1 of GB/T 42952 "Dimensions and Tolerances of Thermoplastic Pipes for Fluid Transport". GB/T 42952 has been The following sections have been published. ---Part 1.Metric series. This document is equivalent to ISO 11922-1.2018 "Dimensions and tolerances of thermoplastic pipes for fluid conveyance Part 1.Metric" series". Please note that some content in this document may be subject to patents. The publisher of this document assumes no responsibility for identifying patents. This document is proposed by China Light Industry Federation. This document is under the jurisdiction of the National Technical Committee for Standardization of Plastic Products (SAC/TC48). This document was drafted by. Baolu Qixing Pipe Co., Ltd., Shanghai Baidie Pipe Technology Co., Ltd., and Construction Research Institute Testing Center Co., Ltd. Company, Yada Plastic Products Co., Ltd., Zhejiang Aikang Industrial Co., Ltd., Qingdao Youpaip Environmental Protection Technology Co., Ltd., Zhejiang Zhongcai Management Dao Technology Co., Ltd., Owentop (China) HVAC System Technology Co., Ltd., Ningbo Hengyuan Precision Pipe Valve Technology Co., Ltd., Hebei Quanen High-tech Pipe Industry Co., Ltd., Shandong Donghong Pipe Industry Co., Ltd., Guangxi Wuyi Pipe Industry Co., Ltd., Shaanxi Special Equipment Inspection and Testing Research Institute, Dongguan Shengjia Rubber and Plastic Technology Co., Ltd. The main drafters of this document. Xu Hongyue, Chai Gang, Li Yan, Li Yu, Qiu Qiang, Zhang Qunjia, Wang Baiti, Shi Mingli, Tong Jinjin, Zhu Ruixia, Ni Fengyao, Hu Tingyong, Zhi Zelin, Zeng Boming.

Introduction

In order to ensure the interchangeability of thermoplastic pipe products for fluid transportation, it is necessary to unify the dimensions and tolerance levels of various types of pipes Provisions. In the past, tolerance classes for thermoplastic pipes were scattered among specific product standards. In most cases, product standards only give For the specific tolerance value, the user cannot know the tolerance level used, nor can he calculate the tolerance of other required dimensions when needed. The purpose of GB/T 42952 is to establish a unified standard covering the dimensions and tolerances of all thermoplastic pipes for fluid transportation. The grade standard is proposed to consist of two parts. ---Part 1.Metric series. ---Part 2.Imperial series. GB/T 42952.1 includes tolerance levels for average outer diameter, out-of-roundness, wall thickness at any point and average wall thickness. Responsible for drafting thermoplastic Each interested party in the material piping documentation can select the applicable tolerance level from this document. Terms and definitions relevant to this document can also be found in GB/T 19278. Thermoplastic pipes for fluid transportation Dimensions and Tolerances Part 1.Metric Series

1 Scope

This document specifies the outer diameter, out-of-roundness and wall thickness of thermoplastic pipes for fluid conveyance in compliance with the requirements of ISO 161-1 and ISO 4065. Thick tolerance grade. This document applies to thermoplastic pipes with constant circular cross-section and smooth inner and outer walls, including different materials, different production processes and Thermoplastic pipes for different intended applications. Note. Depending on the material and intended application, product standards may select applicable tolerance levels from this document.

2 Normative reference documents

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document. ISO 161-1 Nominal outer diameter and nominal pressure of thermoplastic pipes for fluid conveyance Part 1.Metric series (Thermo- Metricseries) Note. GB/T 4217-2008 Nominal outer diameter and nominal pressure of thermoplastic pipes for fluid transportation (ISO 161-1.1996, IDT) Note. GB/T 8806-2008 Determination of dimensions of plastic components of plastic piping systems (ISO 3126.2005, IDT) Note. GB/T 10798-2001 General wall thickness table for thermoplastic pipes (ISO 4065.1996, IDT)

3 Terms and definitions

The following terms and definitions apply to this document. The terminology databases of ISO and IEC can be accessed at. 3.1 dn The nominal values of component dimensions, except for thread dimensions, are approximately equal to the manufacturing dimensions of the component. Note. For pipes complying with ISO 161-1, the nominal outer diameter is equal to the minimum average outer diameter. 3.2 outer diameter de ...