Path:
Home >
GB/T >
Page407 > GB/T 42916-2023
Price & Delivery
US$949.00 · In stock · Download in 9 secondsGB/T 42916-2023: Identification marking of aluminium and aluminium alloy products
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See
step-by-step procedureStatus: Valid
| Std ID | Version | USD | Buy | Deliver [PDF] in | Title (Description) |
| GB/T 42916-2023 | English | 949 |
Add to Cart
|
7 days [Need to translate]
|
Identification marking of aluminium and aluminium alloy products
|
Click to Preview a similar PDF
Basic data
| Standard ID | GB/T 42916-2023 (GB/T42916-2023) |
| Description (Translated English) | Identification marking of aluminium and aluminium alloy products |
| Sector / Industry | National Standard (Recommended) |
| Classification of Chinese Standard | H61 |
| Classification of International Standard | 77.120.10 |
| Word Count Estimation | 50,586 |
| Date of Issue | 2023-08-06 |
| Date of Implementation | 2024-03-01 |
| Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration |
GB/T 42916-2023: Identification marking of aluminium and aluminium alloy products
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 77.120.10
CCSH61
National Standards of People's Republic of China
Aluminum and aluminum alloy product identification
Published on 2023-08-06
2024-03-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Administration Committee
Foreword
This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents"
Drafting.
Please note that some content in this document may be subject to patents. The publisher of this document assumes no responsibility for identifying patents.
This document is proposed by the China Nonferrous Metals Industry Association.
This document is under the jurisdiction of the National Nonferrous Metals Standardization Technical Committee (SAC/TC243).
This document was drafted by. Northeast Light Alloy Co., Ltd., Chongqing Guochuang Light Alloy Research Institute Co., Ltd., Southwest Aluminum (Group) Co., Ltd.
Ltd., Commercial Aircraft Corporation of China Ltd. Shanghai Aircraft Design and Research Institute, Nonferrous Metals Technology and Economic Research Institute Co., Ltd.
Division, Youyan Engineering Technology Research Institute Co., Ltd., Shandong Nanshan Aluminum Co., Ltd., Chinalco Ruimin Co., Ltd., Shenyang Aircraft Industry
(Group) Co., Ltd., Northwest Aluminum Co., Ltd., China Academy of Launch Vehicle Technology, and Liaoning Zhongwang Group Co., Ltd.
The main drafters of this document. Gao Xinyu, Cong Fuguan, Li Zhihui, Liu Wang, Teng Minghe, Li Hongping, Gu Liu, Hu Tianlong, Yao Ze, Lin Shanbin,
Li Dongdong, Wang Shouye, Li Honglin, Gao Baoting.
Aluminum and aluminum alloy product identification
1 Scope
This document specifies the labeling classification, general requirements for aluminum and aluminum alloy product labeling, ingot labeling, plate labeling, strip labeling, and foil labeling.
identification, pipe identification, bar identification, profile identification, wire identification and forging identification.
This document applies to the marking of aluminum and aluminum alloy ingots, plates, strips, foils, tubes, bars, profiles, wires and forgings.
2 Normative reference documents
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations
For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to
this document.
GB/T 8005.1 Aluminum and aluminum alloy terminology Part 1.Products and processing techniques
3 Terms and definitions
The terms and definitions defined in GB/T 8005.1 and the following apply to this document.
3.1
spotmarking
A sign that marks a single set of information at a specific or appropriate location on the product.
3.2
continuousmarking
A logo that repeatedly marks a single set of information at fixed intervals on the surface of the product.
Note. Inkjet coding is generally used for marking.
3.3
perimetermarking
Continuous marking (3.2) around the product.
Note. Inkjet coding is generally used for marking.
3.4
nickmarking
The end surface or end section of the product is marked using steel stamping, pneumatic marking or laser marking.
Note. Single point identification (3.1) is generally used.
3.5
inkjetmarking
The marking is carried out by inkjet printer at the specified position of the product.
Note. Single point marking (3.1), continuous marking (3.2) or surrounding marking (3.3) are generally used.
3.6
labelmark labelmark
Identification by labeling or hanging a sign at the end of the product or at a specified location.
Note. Single point identification (3.1) is generally used.
...
