Path:
Home >
GB/T >
Page499 > GB/T 40224-2021
Price & Delivery
US$259.00 · In stock · Download in 9 secondsGB/T 40224-2021: Plastics boxes used for rainwater infiltration, attenuation and storage
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See
step-by-step procedureStatus: Valid
| Std ID | Version | USD | Buy | Deliver [PDF] in | Title (Description) |
| GB/T 40224-2021 | English | 259 |
Add to Cart
|
3 days [Need to translate]
|
Plastics boxes used for rainwater infiltration, attenuation and storage
|
Click to Preview a similar PDF
Basic data
| Standard ID | GB/T 40224-2021 (GB/T40224-2021) |
| Description (Translated English) | Plastics boxes used for rainwater infiltration, attenuation and storage |
| Sector / Industry | National Standard (Recommended) |
| Classification of Chinese Standard | G33 |
| Word Count Estimation | 14,130 |
| Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration |
GB/T 40224-2021: Plastics boxes used for rainwater infiltration, attenuation and storage
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Plastics boxes used for rainwater infiltration, attenuation and storage
ICS 83.140.30
CCSG33
National Standards of People's Republic of China
Plastic modules for rainwater penetration, regulation and storage
Released on 2021-05-21
2021-12-01 implementation
State Administration of Market Supervision and Administration
Issued by the National Standardization Management Committee
Table of contents
Foreword Ⅰ
Introduction Ⅱ
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 Classification and marking 2
5 Requirements 3
6 Test method 4
7 Inspection rules 5
8 Marking, transportation and storage 6
Appendix A (Informative) Schematic Diagram of Plastic Module 8
Appendix B (normative) Polypropylene (PP) material 10
Appendix C (Normative) Test Method for Water Storage Rate of Plastic Module 11
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents"
Drafting.
Please note that some of the contents of this document may involve patents. The issuing agency of this document is not responsible for identifying patents.
This document was proposed by the China National Light Industry Council.
This document is under the jurisdiction of the National Plastics Standardization Technical Committee (SAC/TC48).
Drafting organizations of this document. Jiangsu Hemajing Co., Ltd., China Architectural Design and Research Institute Co., Ltd., China Plastics Processing Industry Association
Meeting, Henan Ruiteng Plastic Group Co., Ltd., Beijing Research Institute of Chemical Industry of China Petroleum & Chemical Corporation, Guangdong Liansu Technology Industry Co., Ltd.
Company, Hebei Shengshi Jinjing Plastic Industry Co., Ltd., Zhejiang Zhongcai Pipeline Technology Co., Ltd., China Aviation Planning and Design Research Institute Co., Ltd.
Company, Borouge Trading (Shanghai) Co., Ltd., China Academy of Building Research Co., Ltd., Shanghai Baidie Pipe Industry Technology Co., Ltd., Chengde
City Precision Testing Machine Co., Ltd., Jiangte Technology Co., Ltd.
The main drafters of this document. Zhou Minwei, Zhao Li, Wang Zhanjie, Zhang Wei, Wang Yujun, Li Tongyi, Gu Baolin, Chen Jianchun, Zhao Jie, Chen Huilong,
Huang Jiawen, Tang Hui, Wang Xinhua, Tan Donghua, Zhou Minhong.
Introduction
The materials used for the plastic modules for rainwater penetration, regulation and storage are polypropylene (PP), unplasticized polyvinyl chloride (PVC-U), polyethylene (PE)
Etc., the commonly used material for domestic plastic modules is polypropylene (PP). Plastic module product requirements are based on the installation and long-term use of plastic modules.
To be sure, it is mainly made of polypropylene (PP) plastic modules, but also suitable for other materials such as unplasticized polyvinyl chloride (PVC-U) and polyethylene (PE)
Plastic modules.
Plastic modules for rainwater penetration, regulation and storage
1 Scope
This document specifies the terms and definitions, classification and marking, materials, requirements, test methods,
Inspection rules, signs, transportation and storage.
This document applies to plastic modules used in urban buildings and communities, industrial areas, and municipal engineering rainwater control and recycling projects.
2 Normative references
The contents of the following documents constitute the indispensable clauses of this document through normative references in the text. Among them, dated quotations
Only the version corresponding to that date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to
This document.
GB/T 1033.1 Determination of the density of plastic non-foam plastics Part 1.Immersion method, liquid pycnometer method and titration method
GB/T 1040.2 Determination of tensile properties of plastics Part 2.Test conditions for molding and extrusion plastics
GB/T 1843 Determination of impact strength of plastic cantilever beam
GB/T 2828.1 Sampling inspection procedure by attributes Part 1.Batch inspection sampling plan retrieved by acceptance quality limit (AQL)
GB/T 2918 Standard environment for condition adjustment and testing of plastic samples
GB/T 6111-2018 Determination of the internal pressure resistance of thermoplastic piping systems for fluid transportation
GB/T 9341 Determination of bending properties of plastics
GB/T 9345.1 Determination of ash content of plastics Part 1.General method
GB/T 19278-2018 General terms and definitions for thermoplastic pipes, fittings and valves
GB/T 19466.6 Plastic Differential Scanning Calorimetry (DSC) Part 6.Oxidation Induction Time (Isothermal OIT) and Oxidation Induction
Determination of temperature (dynamic OIT)
ISO 580.2005 Plastic piping system. Method for visual assessment of thermal effect of injection molded thermoplastic pipe fittings (Plasticspiping
andductingsystem-Injection-mouldedthermoplasticsfittings-Methodsforvisualyassessingthe
effectsofheating)
EN17150.2019 Test method for short-term compressive strength of plastic piping systems for non-pressurized buried transportation and storage of non-potable water
Method (Plasticspipingsystemsfornon-pressureundergroundconveyanceandstorageofnon-potablewa-
ter-Testmethodfordeterminationofshort-termcompressionstrengthofboxes)
EN17151.2019 Test method for measuring the long-term compressive strength of plastic piping systems for non-pressurized buried transportation and storage of non-potable water
Method (Plasticspipingsystemsfornon-pressureundergroundconveyanceandstorageofnon-potablewa-
ter-Testmethodfordeterminationoflong-termcompressionstrengthofboxes)
EN17152-1.2019 Non-pressure buried transportation and storage of non-potable water plastic piping system infiltration, storage and storage system mold
Block Part 1.PP and PVC-U Rainwater Module Specification (Plasticspipingsystemsfornon-pressureunderground
conveyanceandstorageofnon-potablewater-Boxesusedforinfiltration,attenuationandstoragesys-
tems-Part 1.SpecificationsforstormwaterboxesmadeofPPandPVC-U)
3 Terms and definitions
The following terms and definitions defined in GB/T 19278-2018 apply to this document.
...
