Path: Home > GB/T > Page316 > GB/T 32566.2-2025

Price & Delivery

US$919.00 · In stock · Download in 9 seconds
GB/T 32566.2-2025: Welded stainless steel cylinders - Part 2: Test pressure greater than 6MPa
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid

Std ID	Version	USD	Buy	Deliver [PDF] in	Title (Description)
GB/T 32566.2-2025	English	919	Add to Cart	7 days [Need to translate]	Welded stainless steel cylinders - Part 2: Test pressure greater than 6MPa

GB/T 32566.2-2025: Welded stainless steel cylinders - Part 2: Test pressure greater than 6MPa

---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT32566.2-2025
ICS 23.020.30 CCSJ74 National Standard of the People's Republic of China Stainless steel welded gas cylinders Part 2.Gas cylinders with a test pressure greater than 6 MPa Released on August 29, 2025 Implementation on March 1, 2026 State Administration for Market Regulation The National Standardization Administration issued

Table of Contents

Preface III Introduction V 1 Scope 1 2 Normative references 1 3 Terms and Definitions 2 4 Symbols and instructions 2 5 Materials and Heat Treatment 4 5.1 General Principles 4 5.2 Material Category 4 5.3 Heat Treatment 4 5.4 Test requirements 4 6 Design 5 6.1 General requirements 5 6.2 Calculation of bottle wall thickness 5 6.3 Convex Head Design 5 6.4 Minimum wall thickness requirements 7 6.5 Other shapes of heads 7 6.6 Opening Design 7 6.7 Valve seat (plug seat) 7 7 Manufacturing and process requirements 7 7.1 General requirements 7 7.2 Welding 7 7.3 Welded joints of pressure-bearing parts 8 7.4 Non-pressure accessories 8 7.5 Valve Protection 8 7.6 Bottle thread 8 7.7 Visual Inspection 8 8 Type test 9 8.1 General requirements 9 8.2 Verification and testing 9 8.3 Test requirements 10 8.4 Type test certificate 10 9 Batch test 11 9.1 General requirements 11 9.2 Data 11 9.3 Tensile test 11 9.4 Bending test 13 9.5 Impact test 14 9.6 Macroscopic inspection of weld sections 15 9.7 Inspection and Verification 15 10 Check each one 15 10.1 Voltage test 15 10.2 Hardness test 15 10.3 Leakage test 16 11 Requirements when test results are unsatisfactory 16 12 Sign 16 13 Product Certificate and Batch Quality Certificate 17 Appendix A (Informative) Comparison table of structure numbers between this document and ISO 18172-2.2007 18 Appendix B (Informative) List of technical differences between this document and ISO 18172-2.2007 and their causes 22 Appendix C (Normative) Radiographic Testing of Welds 26 C.1 General requirements 26 C.2 Requirement 26 C.3 Defect Detection 26 Appendix D (Normative) Assessment of manufacturing defects and acceptance criteria during visual inspection of cylinders 28 D.1 Overview 28 D.2 General requirements 28 D.3 Manufacturing defects 28 D.4 Unqualified cylinders 29 Appendix E (Informative) Certificate of Conformity and Batch Quality Certificate Template 30 E.1 Certificate 30 E.2 Batch Quality Certificate 33 Reference 36 Preface This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document is Part 2 of GB/T 32566.GB/T 32566 has published the following parts. ---Stainless steel welded gas cylinders (GB/T 32566-2016); --- Stainless steel welded gas cylinders Part 2.Gas cylinders with test pressure greater than 6 MPa. This document is modified to adopt ISO 18172-2.2007 "Refillable stainless steel welded gas cylinders Part 2.Test pressure greater than 6MPa”. Compared with ISO 18172-2.2007, this document has many structural adjustments. See Appendix A for the table. This document has many technical differences compared to ISO 18172-2.2007. A list of these technical differences and their reasons is given in Appendix B. The following editorial changes have been made to this document. --- Modified the standard name; --- Some clauses adjust the requirements in brackets in ISO 18172-2.2007 to the requirements in the clauses, that is, delete the brackets (see 5.1.2,5.3.2,6.4.3,7.2.1,7.7.2.3,8.1.1,8.2.1,9.1,9.3.2.1,9.3.3.2,Figure 5,9.5.4), improve document organization and readability; --- After translation, some clauses in ISO 18172-2.2007 were deleted (see 5.1.3, 5.1.7, 8.3.1.2, C.2.4, D.2.1, D.2.2, D.4), to suit our language habits and expressions; consistent approach; ---ISO 18172-2 stipulates that the compatibility of material grades and gases should comply with ISO 11114-1, but ISO 11114-1 does not Therefore, the compatibility of the bottle material and the filling gas is modified in this document to refer to ISO 11114-1 (see 5.1.2); ---Delete the unit bar in other chapters, clauses and charts, unify the pressure unit to MPa, and the corresponding wall thickness calculation formula is also changed. Modified (see 6.2); --- Describe "new design test" as "type test" (see Chapter 8), which is consistent with the requirements of my country's safety technical regulations; --- ISO 18172-2 does not indicate the thickness of t in Figure 7, but it is indicated in Figure 8.This document uses the symbol t in the description. The reference legend is changed to Figure 8; --- ISO 18172-2 7.2.2 and 7.3.2 specify the number of test bottles, which are inconsistent with each other. This document clarifies the number of pressure cycle test bottles. The quantity is 3 (see 8.2.2); --- Deleted the repeated description of the location of the intergranular corrosion test specimen in ISO 18172-2.2007 (see 8.3.3); ---Because the template of type test certificate has been specified in the safety technical specification for special equipment, the type test certificate clause in this document has been deleted. Reference to informative appendix (see 8.4); --- Corrected the incorrect description of the number of corrosion test specimens in Figure 5 of ISO 18172-2, and changed it to 2 pieces (see Figure 5, longitudinal weld, girth weld 1 each); --- Corrected the incorrect description of the reference clause in the reference number explanation 3 of Figure 5 of ISO 18172-2.The referenced clause is weld tensile strength Test and relevant provisions of weld bend test (see Figure 5); --- Corrected the text error in ISO 18172-2 regarding the cylinder diameter range applicable to longitudinal impact test specimens (see 9.5.6). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document is proposed and coordinated by the National Technical Committee for Standardization of Gas Cylinders (SAC/TC31). This document was drafted by. Jiangsu Tianhai Special Equipment Co., Ltd., Shanghai Special Equipment Supervision and Inspection Technology Research Institute, Zhejiang Jinxiang Technology Technology Co., Ltd., Jiangsu Rongdao Semiconductor Technology Co., Ltd., Kunshi Container Manufacturing Co., Ltd., Jiangsu Minsheng Heavy Industry Co., Ltd., China Classification Quality Certification Co., Ltd., Hubei Special Equipment Inspection and Testing Institute, Ningbo Jindun Meike Gas Cylinder Intelligent Manufacturing Co., Ltd., Zhejiang Taote Container Technology Co., Ltd., Tai'an Special Equipment Inspection and Research Institute, Beijing Tianhai Industrial Co., Ltd., Kezhe (Shanghai) Valve Co., Ltd., Guoji University, Jiangshan Huihuang Fire Protection Technology Co., Ltd., Wuhan Yiye Steel Structure Co., Ltd., Jiangsu University of Science and Technology, Yixing Beihai Sealing Co., Ltd. Co., Ltd., Shanxi Taigang Stainless Steel Co., Ltd. The main drafters of this document are. Dai Dewei, Xu Weipu, Wang Yuhang, Lu Xiang, Fu Wei, Ni Fei, Hong Yu, Li Li, Wang Jingxiong, Yan Weihua, Wang Youliang, Shi Tianxiang, Zhu Hongbo, Wang Yanhui, Ye Yanchi, Zhang Zhaodong, Yang Bo, Yang Zeshi, Jiang Huaxiong, Zhang Baoguo, Li Hao, Hu Qingxian, Ye Yong, and Mo Jinqiang.

introduction

In order to adapt to the development of socialist market economy, implement the grand goal of the “One Belt and One Road” construction, expand international trade, and improve our GB/T 32566 series of standards adopts ISO 18172 in accordance with the modification. By converting ISO standards, my country can develop various low-pressure and high-pressure non-conductive products at a relatively fast pace. Stainless steel welded gas cylinders contribute to the development of my country's industry. GB/T 32566 "Stainless Steel Welded Gas Cylinders" is intended to be divided into the following two parts. --- Part 1.Cylinders with a test pressure less than or equal to 6 MPa. The purpose is to provide Requirements for the design, manufacture and inspection of stainless steel welded gas cylinders. This part is drafted based on ISO 18172-1.2007 and replaces GB/T 32566-2016 "Stainless steel welded gas cylinders"; --- Part 2.Gas cylinders with test pressure greater than 6 MPa. The purpose is to provide the test pressure greater than 6 MPa stainless steel welded gas cylinders This part is drafted based on ISO 18172-2.2007. The technical provisions of this document include the technical requirements that need to be followed during the production process (i.e. design, manufacturing and inspection) of stainless steel welded gas cylinders. This document does not necessarily, nor can it, include all technical details for the production of welded stainless steel gas cylinders within the scope of application. Stainless steel welded gas cylinders Part 2.Gas cylinders with a test pressure greater than 6 MPa

1 Scope

This document specifies the minimum requirements for materials, design, production technology, manufacturing procedures and testing of stainless steel welded gas cylinders (hereinafter referred to as "cylinders"). The requirements of this. This document is applicable to the ambient temperature of -40℃~60℃, the water pressure test pressure is greater than 6MPa (gauge pressure), the nominal volume is 0.5L~ 150L steel cylinders with an actual tensile strength of no more than 1100MPa, which can be repeatedly filled with compressed gas and liquefied gas.

2 Normative references

The contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 192 Basic profile of common thread (GB/T 192-2003, ISO 68-1.1998, MOD) GB/T 196 Basic Dimensions of Common Threads (GB/T 196-2025, ISO 724.2023, MOD) GB/T 197 General thread tolerances (GB/T 197-2018, ISO 965-1.2013, MOD) GB/T 228.1 Tensile tests on metallic materials - Part 1.Test methods at room temperature (GB/T 228.1-2021, ISO 6892-1. 2019, MOD) GB/T 229 Metallic materials—Charpy pendulum impact test method (GB/T 229-2020, ISO 148-1.2016, MOD) GB/T 231.1 Metallic materials Brinell hardness test Part 1.Test method (GB/T 231.1-2018, ISO 6506-1. 2014, MOD) GB/T 232 Metallic materials - Bend test method (GB/T 232-2024, ISO 7438.2020, MOD) GB/T 713.7 Steel plates and strips for pressure equipment Part 7.Stainless steel and heat-resistant steel GB/T 4334 Corrosion of metals and alloys - Test method for intergranular corrosion of austenitic and ferritic-austenitic (duplex) stainless steels (GB/T 4334-2020, ISO 3651-1.1998, ISO 3651-2.1998, MOD) GB/T 5100 Steel Welded Gas Cylinders (GB/T 5100-2020, ISO 4706.2008, NEQ) GB/T 8335 Gas Cylinder Threads (GB/T 8335-2011, ISO 11363-1.2010, NEQ) GB/T 9251 Gas cylinders hydrostatic test method GB/T 9252 Gas cylinder pressure cycle test method GB/T 12137 Test method for gas cylinder airtightness GB/T 13005 Gas Cylinder Terminology (GB/T 13005-2011, ISO 10286.2007, NEQ) GB/T 14976 Stainless steel seamless pipes for fluid transportation GB/T 15385 Gas cylinder hydraulic burst test method GB/T 17925 X-ray digital imaging inspection of butt welds of gas cylinders GB/T 19418 Guide to quality classification of imperfections in arc-welded steel joints (GB/T 19418-2003, ISO 5817.1992, IDT) GB/T 33209 Welding procedure assessment for welding gas cylinders NB/T 47010 Stainless steel and heat-resistant steel forgings for pressure equipment NB/T 47013.2 Nondestructive testing of pressure equipment Part 2.Radiographic testing ...