Path: Home > GB/T > Page608 > GB/T 29406.1-2012

Price & Delivery

US$169.00 · In stock · Download in 9 seconds
GB/T 29406.1-2012: Safety code for wood preservation plant -- Part 1: Plant design
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid

Std ID	Version	USD	Buy	Deliver [PDF] in	Title (Description)
GB/T 29406.1-2012	English	169	Add to Cart	3 days [Need to translate]	Safety code for wood preservation plant -- Part 1: Plant design

GB/T 29406.1-2012: Safety code for wood preservation plant -- Part 1: Plant design

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Safety code for wood preservation plant Part 1. Plant design ICS 79 B71 National Standards of People's Republic of China Wood preservation plant safety norms Part 1. Plant Design Part 1. Plantdesign Issued on. 2012-12-31 2013-07-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 29406 "wood-preserving plant safety norms" is divided into two parts. --- Part 1. plant design; --- Part 2. Operation. This section GB/T Part of 129,406. This section drafted in accordance with GB/T 1.1-2009 given rules. This section is not equivalent to the Australian/New Zealand Standard AS/NZS2843.1.2000 "Wood Preservation Plant Safety specifications - Part 1. Plant design. " This part of AS/NZS2843.1.2000 compared to the major differences are. --- The standard reference standard references to China's relevant standards; --- Consider China's national conditions, will require a higher degree of automation (eg automatic safety shut-off device, etc.) content standard equipment and facilities, Corresponding to manual control over the content. This part of the People's Republic of China Ministry of Commerce and focal points. This section is drafted. wood conservation Development Center, Guangdong Academy of Forestry. The main drafters of this section. Su Haitao, Yu Nai autumn, Liu Lei, Liang Linqing, Zhang Yanjun, Mashou Hua Tao-ming. Wood preservation plant safety norms Part 1. Plant Design

1 Scope

This section GB/T 29406 specifies the wood preservative plant (hereinafter referred to as the factory) basic requirements, site selection, planning and factory equipment Claim. This section applies to the design and management of wood-preserving plant and equipment. Wood preservation plant approval may also refer to use.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 12801-2008 General requirements for safety and health production process GB/T 14019 wood preservative term GB 15603 commonly used hazardous chemicals stored General GB 22280 wood preservative manufacturing practice GB 50009 building structural load specifications GB 50016 architectural design code for fire protection GB 50010 standard design of concrete structures SB/T 10440 vacuum and (or) pressure impregnated (treated) wood preservative equipment unit

3 Terms and Definitions

GB/T 14019, GB 22280 and SB/T 10440 and as defined in the following terms and definitions apply to this document. 3.1 Wood preservation plant timbertreatmentplant Including wood preservative treatment plant and Landing. 3.2 Treatment plant treatmentplantsite Wood treatment options, including anti-corrosion treatment area, loading area and a dropping zone. 3.3 Landing treatmentplantyard The factory used to operate and store the wood preservative site. 3.4 Retaining wall waterproofwal Within the treatment plant to prevent the preservative fluid outflow, and the ground connection of the reinforced concrete structure. 3.5 Sump liquid-colectedpool Collection and treatment facilities in the workshop leaking liquid, typically steel or reinforced concrete structure. ...