Path: Home > GB/T > Page264 > GB/T 2775-2016

Price & Delivery

US$234.00 · In stock · Download in 9 seconds
GB/T 2775-2016: Capacitors and resistors for use in electronic equipment -- Preferred dimensions of shaft ends, bushes and for the mounting of single-hole, bush-mounted, shaft-operated electronic components
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid

Std ID	Version	USD	Buy	Deliver [PDF] in	Title (Description)
GB/T 2775-2016	English	234	Add to Cart	3 days [Need to translate]	Capacitors and resistors for use in electronic equipment -- Preferred dimensions of shaft ends, bushes and for the mounting of single-hole, bush-mounted, shaft-operated electronic components
GB/T 2775-1993	English	439	Add to Cart	3 days [Need to translate]	Dimensions of spendle ends for manually operated electronic components

GB/T 2775-2016: Capacitors and resistors for use in electronic equipment -- Preferred dimensions of shaft ends, bushes and for the mounting of single-hole, bush-mounted, shaft-operated electronic components

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Capacitors and resistors for use in electronic equipment.Preferred dimensions of shaft ends, bushes and for the mounting of single-hole, bush-mounted, shaft-operated electronic components ICS 29.120.40 K64 National Standards of People's Republic of China Replacing GB/T 2775-1993, GB/T 14120-1993 Electrical equipment capacitors and resistors shaft ends, Sleeve and single hole bushing installation and shaft control Preferred dimensions for electronic components shaftends, bushesandforthemountingofsingle-hole, bush-mounted, (IEC 60915..2006, IDT) 2016-04-25 release.2016-11-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Management Committee released Directory Preface III 1 Scope 1 2 normative reference document 1 3-axis end and sleeve size 1 3.1 ordinary round shaft 1 3.2 single plane axis 2 3.3 Slot shaft 3 3.4 concentric axis 3 4 single hole installation, sleeve installation and axial control of the preferred size of electronic components 4 4.1 Installation of single-hole bushings with panel locating pins (non-rotating devices) on the mounting surface 4 4.2 Single and double flat bushing installation 6 4.3 Single hole bushings with sleeve locating pins on the sleeve 7 4.4 Fix (or install) nuts 4.5 washers (flat, ripple and internal teeth) 8 Figure 1 common round shaft 1 Figure 2 single plane axis 2 Figure 3 with slotted shaft 3 Figure 4 concentric axis 3 Figure 5 Basic component dimensions 4 Figure 6 Basic panel opening dimensions 5 Figure 7 Basic component dimensions 6 Figure 8 Basic panel opening dimensions 6 Figure 9 Basic element dimensions 7 Figure 10 Basic panel opening dimensions 7 Figure 11 Fixing (or installing) nuts Table 1 Preferred dimensions for common circular axes 2 Table 2 Preferred dimensions for single plane axes 2 Table 3 Preferred dimensions for grooved shafts 3 Table 4 Preferred dimensions of concentric shafts Table 5 Preferred dimensions for bushings, panel locating pins (non-rotating devices) and associated positions 5 Table 6 Preferred dimensions for bushings and mounting holes 6 Table 7 Preferred dimensions for bushings, panel locating pins (non-rotating devices) and mounting holes 7 Table 8 Preferred dimensions for fixing (or installing) nuts

Foreword

This standard is drafted in accordance with the rules given in GB/T 1.1-2009. The standard instead of GB/T 2775-1993 "manual electronic components of the shaft end size" and GB/T 14120-1993 "single hole sleeve installation, Axial installation of electronic components installed size ". This standard compared with GB/T 2775-1993, the main changes are as follows. --- GB/T 2775-1993 "Shaft end dimensions for manual electronic components" Equivalent to IEC 60390. 1972/IEC 60390A. 1979 standard has been included in the IEC 60915. 1987 in 1987, at the same time this standard also includes "single-hole sleeve installation, Pieces of the installation size "content; --- related to the table, map and reference documents revised. The use of this standard is equivalent to the use of IEC 60915..2006 "fixed-use capacitors for electronic equipment, shaft, sleeve and single-hole sleeve Installation and axial control of electronic components of the preferred size "and IEC 60915 Errata 2..2008" electronic equipment capacitors and resistors shaft, shaft Sets and single-hole bushing installation and axial control of the preferred size of electronic components. " And the normative reference in this standard international documents are consistent with the relationship between China's documents are as follows. GB/T 2775-1993 Shaft end dimensions for manual electronic components (eqvIEC 60390. 1972/IEC 60390A. 1979); Installation dimensions of single - hole bushings and mounting dimensions of axially controlled electronic components (eqvIEC 60620. 1984) GB/T 14120-1993. This standard is consistent with the international standard structure, for ease of use, made the following editorial changes. --- standard name by the "electronic equipment with fixed-capacitor shaft, sleeve and single-hole sleeve installation and axial control of electronic components of the preferred ruler Inch "to" electronic equipment with capacitors and resistors shaft, shaft and single-hole sleeve installation and axial control of electronic components of the preferred ruler Inch"; --- Standard drawings according to China's mapping standards for individual changes; In Figure 3, IEC 60915..2006 does not specify a, here to increase the description of a, while increasing a chamfer; In Figure 4, IEC 60915..2006 does not specify a, here is a description of a. This standard is proposed by China Electrical Equipment Industry Association. This standard is nationalized by the National Committee for Standardization of Electrical Appliances (SAC/TC67). The drafting unit. Shanghai Electric Tools Research Institute, Zhangjiagang Huajie Electronics Co., Ltd., Zhejiang Zhongxun Electronics Co., Ltd. The main drafters of this standard. Chen Ping, Zhang Weichang, Fang Liang, Zheng Jianzhong, Qu Hailiang. This standard replaced the previous version of the standard release. --- GB/T 2775-1981; --- GB/T 2775-1993; --- GB/T 14120-1993. Electrical equipment capacitors and resistors shaft ends, Sleeve and single hole bushing installation and shaft control Preferred dimensions for electronic components

1 Scope

This standard applies to variable capacitors, potentiometers and variable resistors for electronic equipment. Since the IEC 60390 and IEC 60620 include a large range of sizes and include a number of different electrical equipment capacitors and Resistors, the dimensions given in this standard are based on these two criteria. Therefore, this standard contains the shaft end, sleeve, single hole installation, shaft Set of mounting and shaft control variable capacitors, variable resistors and potentiometers. If this standard does not list other feet that must be used These dimensions can also be selected from the above criteria.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. IEC 60390 Handheld electronic components of the shaft end dimension (Dimensionsofspindleendsformanualyoperatedelectronic components IEC 60620 single hole mounting, sleeve mounting, shafted electronic components Dimensions (Dimensionsforthemountingofsingle- hole, bush-mounted, spindle-operatedelectroniccomponents) 3-axis ends and the preferred dimensions of the sleeve 3.1 ordinary round shaft The common circular axis is shown in Figure 1, preferably in Table 1. a - chamfer 40 ° ~ 50 ° or radius depth 5% to 10% of size A. ...