GB/T 27689-2025 PDF English
Price & Delivery
US$395.00 · In stock · Download in 9 secondsGB/T 27689-2025: Small amusement device - Slide
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid
GB/T 27689: Historical versions
| Standard ID | USD | BUY PDF | Delivery | Standard Title (Description) | Status |
| GB/T 27689-2025 | 395 | Add to Cart | Auto, 9 seconds. | Small amusement device - Slide | Valid |
| GB/T 27689-2011 | 1199 | Add to Cart | 8 days | No power type of amusement devices -- Children slide | Valid |
Click to Preview this PDF
GB/T 27689-2025: Small amusement device - Slide
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT27689-2025GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 97.200.40 CCS Y 57 Replacing GB/T 27869-2011 (Should be GB/T 27689-2011) Small Amusement Device - Slide Issued on: AUGUST 29, 2025 Implemented on: MARCH 1, 2026 Issued by. State Administration for Market Regulation; Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword... 3 1 Scope... 7 2 Normative References... 7 3 Terms, Definitions and Abbreviations... 8 4 Classification and Types... 10 5 Technical Requirements... 10 6 Test Methods... 22 7 Inspection Rules... 26 8 Marking, Instructions for Use, and Use Management... 29 9 Packaging, Transportation and Storage... 30 Appendix A (informative) Types of Common Slide Components... 32 Small Amusement Device - Slide1 Scope
This document defines the terms and definitions of small amusement slides, stipulates their classification and types, technical requirements, inspection rules, marking and instructions for use, usage management, packaging, transportation and storage, and describes the corresponding test methods. This document applies to small amusement slides for children aged 3 to 14 years used in public places. This document does not apply to snow slides, water slides, inflatable slides, grass slides, dry- land chutes (rainbow chutes), concrete chutes, and glass chutes, etc.2 Normative References
The contents of the following documents constitute indispensable clauses of this document through the normative references in the text. In terms of references with a specified date, only versions with a specified date are applicable to this document. In terms of references without a specified date, the latest version (including all the modifications) is applicable to this document. GB/T 191 Packaging - Pictorial Marking for Handling of Goods GB/T 250 Textiles - Tests for Color Fastness - Grey Scale for Assessing Change in Color GB/T 1040.1 Plastics - Determination of Tensile Properties - Part 1.General Principles GB/T 1040.2 Plastics - Determination of Tensile Properties - Part 2.Test Conditions for Molding and Extrusion Plastics GB/T 1447 Fiber-reinforced Plastics Composites - Determination of Tensile Properties GB/T 1449 Fiber-reinforced Plastics Composites - Determination of Flexural Properties GB/T 1451 Fiber-reinforced Plastics Composites - Determination of Charpy Impact Properties GB/T 1766 Paints and Varnishes - Rating Schemes of Degradation of Coats GB/T 1843 Plastics - Determination of Izod Impact Strength GB/T 1865 Paints and Varnishes - Artificial Weathering and Exposure to Artificial Radiation - Exposure to Filtered Xenon-arc Radiation GB/T 2411 Plastics and Ebonite - Determination of Indentation Hardness by Means of a Durometer (shore hardness) GB/T 9286 Paints and Varnishes - Cross-cut Test GB/T 9341 Plastics - Determination of Flexural Properties GB/T 16422.1 Plastics - Methods of the Exposure to Laboratory Light Sources - Part 1.General Guidance GB/T 16422.2 Plastics - Methods of Exposure to Laboratory Light Sources - Part 2.Xenon-arc Lamps GB/T 28622-2012 No Power Type of Amusement Devices - Terminology GB/T 34272 Specification for Safety of Small Amusement Device GB/T 34370 (all parts) Nondestructive Testing of Amusement Equipment3 Terms, Definitions and Abbreviations
The terms and definitions defined in GB/T 28622-2012 and GB/T 34272, and the following are applicable to this document. 3.1 slide A small amusement facility composed of slide components, etc., designed for sliding and recreational purposes. [source. GB/T 28622-2012, 3.1, modified] 3.2 slide component A component with an inclined surface, consisting of a starting section, a sliding section, and a run-out section, which can guide users to slide within a designated track. 3.3 path The path leading to the starting section or platform of a slide component. NOTE. ladders, steps, stairs, climbing equipment, etc., are all considered paths. 3.4 slide component height The vertical distance from the highest point of the starting section of a slide component to the ground or supporting surface. NOTE. see Figure 1 for a schematic diagram of the slide component height. [source. GB/T 28622-2012, 3.18, modified] 3.6 roller slide A slide whose slide components are made of rollers. NOTE. see Figure 3 for a schematic diagram of a roller slide.4 Classification and Types
4.1 Classification 4.1.1 In accordance with the shape of the slide components, they are divided into open-type and tubular-type. 4.1.2 In accordance with the sliding trajectory, they are divided into straight-type, curved-type and spiral-type. 4.1.3 In accordance with the vertical cross-sectional shape of the sliding section, they are divided into straight chutes and wave-type chutes. 4.2 Types In accordance with the classification in 4.1, typical structural types of the slide components are shown in Appendix A.5 Technical Requirements
5.1 Basic Requirements 5.1.1 In addition to meeting the requirements of this document, the slides shall also comply with the provisions of GB/T 34272. 5.1.2 The slides shall not pose a risk of burns from high temperatures during use. 5.1.3 Bolted connections shall be able to meet the load requirements, and measures shall be taken to prevent bolt loosening. 5.2 Materials 5.2.1 Plastic parts The physical and chemical properties of the load-bearing plastic parts shall meet the requirements of Table 1. 5.2.2 Fiberglass parts 5.2.2.1 The appearance of fiberglass parts shall meet the following requirements. a) Free from defects such as poor impregnation, poor curing, bubbles, delamination of cut surfaces, and uneven thickness, etc.; b) Free from defects such as cracks, damage, obvious repair marks, exposed fabric texture, wrinkles, unevenness, and inconsistent color tone on the surface; corners shall be smoothly rounded and free of burrs. 5.2.2.2 When fiberglass parts are directly connected to load-bearing parts, they shall have sufficient strength; otherwise, metallic parts meeting strength requirements shall be pre- embedded. 5.2.2.3 The mechanical properties of fiberglass parts shall meet the requirements of Table 2. 5.3 Basic Parameters 5.3.1 Width of open-type slide components 5.3.1.1 When the slide component height is 3,000 mm, the width of the open-type slide components shall be 400 mm ~ 650 mm or 950 mm. 5.3.1.2 When the slide component height is > 3,000 mm, the open-type slide component design shall not be used. 5.3.2 Inner diameter/internal height of tubular-type 5.3.2.1 When the slide component height is 3,000 mm, the inner diameter of the tubular-type slide components shall be ϕ650 mm ~ ϕ800 mm. 5.3.2.2 When the slide component height is > 3,000 mm, the inner diameter of the tubular-type slide components shall be ϕ750 mm ~ ϕ800 mm. 5.3.2.3 When the tubular shape is non-circular, the internal height of the tube shall not be less than 750 mm. 5.3.3 Slide component depth 5.3.3.1 The depth of the open-type slide components shall conform to the provisions of Table 3.The depth of multi-chute tubular-type slide components shall refer to the relevant provisions in Table 3 for open straight-type or open curved-type. For slide components combining tubular and open types with a slide component height exceeding 3,000 mm, the depth shall be appropriately increased. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
