GB/T 273.1-2023 PDF English
Price & Delivery
US$705.00 · In stock · Download in 9 secondsGB/T 273.1-2023: Rolling bearings - Boundary dimensions general plan - Part 1: Tapered roller bearings
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid
GB/T 273.1: Historical versions
| Standard ID | USD | BUY PDF | Delivery | Standard Title (Description) | Status |
| GB/T 273.1-2023 | 705 | Add to Cart | Auto, 9 seconds. | Rolling bearings - Boundary dimensions general plan - Part 1: Tapered roller bearings | Valid |
| GB/T 273.1-2011 | 1479 | Add to Cart | 6 days | Rolling bearings -- Boundary dimensions general plan -- Part 1: Tapered roller bearings | Obsolete |
| GB/T 273.1-2003 | 639 | Add to Cart | 5 days | Rolling bearings tapered roller bearing dimensions, general plan | Obsolete |
| GB/T 273.1-1987 | 799 | Add to Cart | 5 days | Rolling bearings--Tapered roller bearings--Boundary dimensions | Obsolete |
Click to Preview this PDF
Similar standards
GB/T 273.1-2023: Rolling bearings - Boundary dimensions general plan - Part 1: Tapered roller bearings
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT273.1-2023
GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 21.100.20 CCS J 11 GB/T 273.1-2023 / ISO 355.2019 Replacing GB/T 273.1-2011 Rolling Bearings – Boundary Dimensions General Plan – Part 1.Tapered Roller Bearings (ISO 355.2019, Rolling Bearings – Tapered Roller Bearings – Boundary Dimensions and Series Designations, IDT) Issued on: MAY 23, 2023 Implemented on: DECEMBER 1, 2023 Issued by. State Administration for Market Regulation; Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword... 3 Introduction... 5 1 Scope... 6 2 Normative References... 6 3 Terms and Definitions... 7 4 Symbols... 7 5 Series Designations... 10 6 Boundary Dimensions... 11 Annex A (Informative) Flange Dimensions for Additional Outer Ring Sizes... 41 Bibliography... 43Foreword
This Document was drafted as per the rules specified in GB/T 1.1-2020 Directives for Standardization – Part 1.Rules for the Structure and Drafting of Standardizing Documents. This Document is Part 1 of GB/T 273 Rolling Bearings – Boundary Dimensions General Plan. GB/T 273 has issued the following parts. --- Part 1.Tapered Roller Bearings; --- Part 2.Thrust Bearings; --- Part 3.Radial Bearings. This Document replaced GB/T 273.1-2011 Rolling Bearings – Boundary Dimensions General Plan – Part 1.Tapered Roller Bearings. Compared with GB/T 273.1-2011, the major technical changes of this Document are as follows besides the editorial modifications. a) Change some symbols (see Clause 4 of this Edition; Clause 4 of the 2011 Edition); b) Change the schematic diagram of the tapered roller bearing structure (see Figures 1 to 4 of this Edition; Figures 1 to 4 of the 2011 edition); c) Add the minimum chamfer dimensions and contact angles of double-row or paired tapered roller bearings (see Tables 9 to 12 of this Edition); d) Add the inner ring inner diameter of single-row tapered roller bearings with flanged outer rings, single-row bearing width and other dimensions (see Tables 13 to 16 of this Edition). This Document equivalently adopted ISO 355.2019 Rolling Bearings – Tapered Roller Bearings – Boundary Dimensions and Series Designations. This Document made the minimum editorial modifications as follows. --- To be consistent with the existing series standard names, change the document name into Rolling Bearings – Boundary Dimensions General Plan – Part 1.Tapered Roller Bearings. Please note some contents of this Document may involve patents. The issuing agency of this Document shall not assume the responsibility to identify these patents. This Document was proposed by China Machinery Industry Federation. This Document shall be under the jurisdiction of National Technical Committee on Rolling Bearings of Standardization Administration of China (SAC/TC 98). Drafting organizations of this Document. Luoyang Bearing Research Institute Co., Ltd.; Rolling Bearings – Boundary Dimensions General Plan – Part 1.Tapered Roller Bearings1 Scope
This document specifies bearing and subunit boundary dimensions for complete single-row and double-row tapered roller bearings. It also specifies the flange dimensions of flanged outer rings for a selection of these bearings. A series designation for each bearing is also specified.2 Normative References
The provisions in following documents become the essential provisions of this Document through reference in this Document. For the dated documents, only the versions with the dates indicated are applicable to this Document; for the undated documents, only the latest version (including all the amendments) is applicable to this Document. ISO 492 Rolling bearings – Radial bearings – Geometrical Product Specifications (GPS) and tolerance values NOTE. GB/T 307.1-2017 Rolling bearings - Radial bearings - Geometrical product specifications (GPS) and tolerance values (ISO 492.2014, IDT) ISO 582 Rolling bearings – Chamfer dimensions – Maximum values NOTE. GB/T 274-2023 Rolling bearings - Chamfer dimension - Maximum values (ISO 582.1995, MOD) ISO 1132-1 Rolling bearings – Tolerances – Part 1.Terms and definitions NOTE. GB/T 4199-2003 Rolling bearings - Tolerances – Definitions (ISO 1132-1.2000, MOD) ISO 5593 Rolling bearings – Vocabulary NOTE. GB/T 6930-2023 Rolling bearings -Vocabulary (ISO 5593.2019, IDT) ISO 15241 Rolling bearings – Symbols for physical quantities NOTE. GB/T 7811-2015 Rolling bearings - Symbols for physical quantities (ISO 15241.2012, IDT) ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
