Path:
Home >
GB/T >
Page726 > GB/T 26079-2025
Price & Delivery
US$379.00 · In stock · Download in 9 secondsGB/T 26079-2025: Beam-type lifting device
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See
step-by-step procedureStatus: Valid
GB/T 26079: Historical versions
| Std ID | Version | USD | Buy | Deliver [PDF] in | Title (Description) |
| GB/T 26079-2025 | English | 379 |
Add to Cart
|
4 days [Need to translate]
|
Beam-type lifting device
|
| GB/T 26079-2010 | English | 399 |
Add to Cart
|
3 days [Need to translate]
|
Beam-type lifting device
|
Click to Preview a similar PDF
Basic data
| Standard ID | GB/T 26079-2025 (GB/T26079-2025) |
| Description (Translated English) | Beam-type lifting device |
| Sector / Industry | National Standard (Recommended) |
| Classification of Chinese Standard | J80 |
| Classification of International Standard | 53.020.30 |
| Word Count Estimation | 18,177 |
| Date of Issue | 2025-12-02 |
| Date of Implementation | 2026-07-01 |
| Older Standard (superseded by this standard) | GB/T 26079-2010 |
| Issuing agency(ies) | State Administration for Market Regulation, Standardization Administration of China |
GB/T 26079-2025: Beam-type lifting device
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 53.020.30
CCSJ80
National Standards of the People's Republic of China
Replaces GB/T 26079-2010
Beam-type lifting equipment
Published on 2025-12-02
Implemented on July 1, 2026
State Administration for Market Regulation
The State Administration for Standardization issued a statement.
Foreword
This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents".
Drafting.
This document replaces GB/T 26079-2010 "Beam Lifting Equipment". Compared with GB/T 26079-2010, the main differences are structural adjustments and editorial changes.
Aside from the changes, the main technical changes are as follows.
a) The requirements for critical load-bearing welds have been revised (see 7.2.2, 7.6.2.2 in the.2010 edition);
b) The inspection and acceptance rules for butt joint full penetration welds and other welds in box girder and single-web girder structures have been revised (see 7.2.3,.2010 edition).
7.6.2.3);
c) The requirement for stress relief in the beam structure has been increased (see 7.2.5);
d) The requirement for operating temperature has been removed (see 7.3.1.1 in the.2010 version);
e) The provisions for fatigue verification of beams have been revised (see 7.3.1.4, 7.5 in the.2010 version);
f) The technical requirements for pulleys have been revised (see 7.4, 7.10 in the.2010 edition);
g) Added relevant methods for static equilibrium testing (see 8.5,.2010 edition of 8.5);
h) The requirements for static load testing have been revised (see 8.6,.2010 version of 8.6).
Please note that some content in this document may involve patents. The issuing organization of this document assumes no responsibility for identifying patents.
This document was proposed by the China Iron and Steel Association.
This document is under the jurisdiction of the National Steel Standardization Technical Committee (SAC/TC183).
This document was drafted by. Jully Rigging Co., Ltd., Shanxi Luyeda Metallurgical Machinery Co., Ltd., and Jiangsu Rongxin General Equipment Co., Ltd.
The company and the Metallurgical Industry Information and Standards Research Institute.
The main drafters of this document are. Zhao Chunjiang, Cui Jianying, Lu Qizheng, Dai Jirong, Wang Yujie, Liu Baoshi, Zheng Qiang, Yang Lifeng, Dai Min, and Xu Haochi.
The release history of this document and the document it replaces is as follows.
---First published in.2010 as GB/T 26079-2010;
---This is the first revision.
Beam-type lifting equipment
1 Scope
This document specifies the ordering details, classification and designation, structure and model, requirements, test methods, inspection rules, marking, and procedures for beam lifting assemblies.
Packaging, transportation and storage.
This document applies to the use of beam-type lifting devices (hereinafter referred to as lifting devices) for lifting machinery. Other beam-type lifting devices not specified in this document may also be used.
Follow the instructions.
2 Normative references
The contents of the following documents, through normative references within the text, constitute essential provisions of this document. Dated citations are not included.
For references to documents, only the version corresponding to that date applies to this document; for undated references, the latest version (including all amendments) applies.
This document.
GB/T 699 High-quality carbon structural steel
GB/T 985.1 Recommended bevels for gas welding, shielded metal arc welding, gas shielded welding and high energy beam welding
GB/T 985.2 Recommended bevel for submerged arc welding
GB/T 1231 High-strength large hexagonal head bolt assemblies for steel structures
GB/T 1591 Low-alloy high-strength structural steel
GB 2893 Safety Colors
GB/T 3077 Alloy Structural Steel
GB/T 3323.1 Nondestructive testing of welds—Radiological inspection—Part 1.Film techniques for X-rays and gamma rays
GB/T 6402-2024 Ultrasonic Testing Methods for Steel Forgings
GB/T 8162 Seamless steel tubes for structural use
GB/T 8923.1 Visual assessment of surface cleanliness of steel before coating - Part 1.Uncoated steel
Rust level and treatment level of the surface and the steel surface after complete removal of the original coating.
GB/T 8923.2 Visual assessment of surface cleanliness of steel surfaces before coating - Part 2.Coated steel
Treatment level after partial removal of the original coating on the surface
GB/T 8923.3 Visual assessment of surface cleanliness of steel surfaces before coating - Part 3.Welds, edges and others
Treatment level of surface defects in the area
GB/T 11345 Ultrasonic testing techniques, testing levels and evaluation for non-destructive testing of welds
GB/T 16270 High-strength structural steel plates (quenched and tempered)
GB/T 16762 General Purpose Steel Wire Rope Slings. Characteristics and Technical Conditions
GB/T 20652 M(4), S(6) and T(8) grade welded lifting chains
GB/T 25853 Grade 8 Non-welded Lifting Chains
GB/T 26951 Nondestructive testing of welds - Magnetic particle testing
GB/T 26952-2011 Non-destructive testing of welds - Magnetic particle testing of welds - Acceptance grade
GB/T 29712-2023 Acceptance Levels of Ultrasonic Testing for Non-destructive Testing of Welds
GB/T 37400.3-2019 General Technical Conditions for Heavy Machinery Part 3.Welded Components
GB/T 37400.8 General technical conditions for heavy machinery - Part 8.Forgings
...
