Path:
Home >
GB/T >
Page315 > GB/T 25754-2010
Price & Delivery
US$134.00 · In stock · Download in 9 secondsGB/T 25754-2010: Vacuum technology -- Right-angle valve -- Dimensions and interfaces for pneumatic actuator
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See
step-by-step procedureStatus: Valid
| Std ID | Version | USD | Buy | Deliver [PDF] in | Title (Description) |
| GB/T 25754-2010 | English | 134 |
Add to Cart
|
3 days [Need to translate]
|
Vacuum technology -- Right-angle valve -- Dimensions and interfaces for pneumatic actuator
|
Click to Preview a similar PDF
Basic data
| Standard ID | GB/T 25754-2010 (GB/T25754-2010) |
| Description (Translated English) | Vacuum technology -- Right-angle valve -- Dimensions and interfaces for pneumatic actuator |
| Sector / Industry | National Standard (Recommended) |
| Classification of Chinese Standard | J78 |
| Classification of International Standard | 23.160 |
| Word Count Estimation | 7,712 |
| Date of Issue | 2010-12-23 |
| Date of Implementation | 2011-10-01 |
| Quoted Standard | GB/T 4982; GB/T 6070-2007; ISO 3669 |
| Adopted Standard | ISO 21358-2007, IDT |
| Regulation (derived from) | National Standard Approval Announcement 2010 No.10 (Total No.165) |
| Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China |
| Summary | This standard specifies the right angle valve size. So that it can match with GB/T 16709. 1 GB/T 16709. 2 mounting dimensions specified in the elbow and phase. Right angle valves are included with the standard GB/T 16709. 1, GB/T 16709. 2 and flanges as specified in ISO 3669. |
GB/T 25754-2010: Vacuum technology -- Right-angle valve -- Dimensions and interfaces for pneumatic actuator
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Vacuum technology. Right-angle valve. Dimensions and interfaces for pneumatic actuator
ICS 23.160
J78
National Standards of People's Republic of China
Vacuum technology right angle valve
Interface dimensions and pneumatic devices
(ISO 21358.2007, IDT)
Issued on. 2010-12-23
2011-10-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard is identical with ISO 21358.2007 "right-angle valve size vacuum technology and pneumatic device interface" (in English).
This standard is equivalent to translate ISO 21358.2007 "right-angle valve size vacuum technology and pneumatic device interface" (in English).
For ease of use, this standard made the following editorial changes.
a) use the "standard" instead of "this International Standard";
b) use the decimal symbol instead of as a decimal comma ",". ",";
c) Remove the foreword and introduction of international standards, increase the introduction of this standard.
This standard Normative references GB/T 6070-2007 "Vacuum Technology flange dimensions," a reference to part with ISO 1609 "Vacuum Technology
Exactly the same technique flange dimensions "content.
The standard proposed by China Machinery Industry Federation.
The vacuum technology standard by the National Standardization Technical Committee (SAC/TC18) centralized.
This standard is drafted by. Shanghai Valve Plant Co., Ltd.
Participated in the drafting of this standard. Shenyang Vacuum Technology Research Institute, Lanzhou Vacuum Equipment Co., Ltd., Beijing Science and Technology Development has giant Friends
Limited, Anhui Hefei Science and Technology Co., Ltd.
The main drafters of this standard. Lingling, Wang Zhenghua, Wen Falan, Zhengrong Xi, Wei fresh, GUIDING.
Introduction
Part in actual use, as a right-angle valve pipe fittings international standard often used in the vacuum system, and not at right angles to the previous valve
And national standards.
This standard is based on GB/T 16709.1-2010/ISO 9803-1.2007 "Vacuum technology - Pipeline fittings assembly dimension s
Part 1. No edge flange type "and GB/T 16709.2-2010/ISO 9803-2.2007" Vacuum technology - Pipeline fittings assembly dimensions
Part 2. knife-edge flange type "to develop, these standards have to pipe fittings assembly dimensions are standardized, and therefore pneumatic device interface
Standardized.
Because of this standard references ISO 3669, in order to avoid obscuring the confusion to allow standard users to understand the standard reference, I
We provide some relevant information will be explained.
ISO 3669 consists of two parts.
--- ISO 3669. 1986 "vacuum technology ovenable flange dimensions";
--- ISO /T S3669-2.2007 "ovenable vacuum technology flanges - Part 2. edge flange dimensions."
This standard references ISO 3669 refers to the ISO 3669. 1986 "vacuum technology ovenable flange dimensions." But also because
ISO 21358.2007 before the ISO /T S3669-2.2007 publication.
ISO /T S3669-2.2007 and ISO 3669. 1986 in comparison, made an important technical changes, ISO 3669. 1986 provides for two lines
Baking column flange.
--- Preferred series, its main dimensions to ensure compatibility with non-standardized baking flange (see ISO 1609);
--- Second best series, corresponding to the common flange.
ISO /T S3669-2.2007 only provides for a series, and no longer depends on the "preferred" family values. In fact, ISO 3669.
1986 "preferred" series of outdated or obsolete, and therefore enhance the "second choice" become a series and is the only set of predetermined size. another
In addition, this "second choice" series of several sizes, but also for the general use of the flange was modified until the sealing edge profiles are detailed dimensions
Included.
ISO /T S3669-2.2007 after three years will be reviewed by the ISO /TC112, in order to decide whether the next three years
Approved, the revised international standards, or withdrawn. If approved, it will be revised again after the next three years,
During this time, it must either be transferred to the international standards, or be withdrawn.
ISO /T S3669-2.2007 has been GB /Z25756-2010 "vacuum technology ovenable flange edge flange size" is equivalent
use.
The above description of the ISO 3669 is that it is the GB/T 16709.1-2010/ISO 9803-1.2007, GB/T 16709.2-
Vacuum technology right angle valve
Interface dimensions and pneumatic devices
1 Scope
This standard specifies the right-angle valve size, so that it can with the GB/T 16709.1 and GB/T 16709.2 specified An elbow
Package size to match.
Right Angle valves are covered by this standard with GB/T 16709.1, GB/T 16709.2 specified in ISO 3669 and the flange.
ISO 3669 listed two flanges Series.
--- Preferred Series;
--- Second best series.
This standard covers only the second best series valves with flange.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 4982 Vacuum technology - Quick release couplings - Dimensions - Part 1. Clamping Type (GB/T 4982-2003, ISO 2861-1.
1974, IDT)
GB/T 6070-2007 Technical vacuum flange size (GB/T 6070-2007, ISO 1609. 1986, MOD)
ISO 3669 Vacuum technology can bake flange size
3 Terms and Definitions
Terms and definitions GB/T 4982 and GB/T 6070 established in this standard applies.
4 Requirements
Vacuum line 4.1 should be the same size and mounting accessories Table 1, Table 2 regulations. see picture 1.
4.2 flange dimensions should be GB/T 4982, GB/T 6070 and ISO 3669 as prescribed. Or more preferably a flange Looper
form.
Interface 5 pneumatic devices
Threaded pipe pneumatic device inlet/outlet and the device requirements are as follows.
a) The minimum pneumatic pressure (for valve opening and closing). 0.4MPa;
b) Maximum pneumatic pressure (for preventing destruction). 0.7MPa;
c) Transmission systems, pneumatic inlet and outlet thread size and units (for example. "mm", "inch"), should be in use and/or body
Electrical specifications d) the best mark for displaying the open/closed status contact (or capacity) (for example. "DC24V/2A, AC250V /
20mA/60Hz ").
...
