Path: Home > GB/T > Page723 > GB/T 25428-2025

Price & Delivery

US$839.00 · In stock · Download in 9 seconds
GB/T 25428-2025: Petroleum and natural gas industries - Drilling and production equipment - Drilling and well-servicing structures
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid

Std ID	Version	USD	Buy	Deliver [PDF] in	Title (Description)
GB/T 25428-2025	English	839	Add to Cart	6 days [Need to translate]	Petroleum and natural gas industries - Drilling and production equipment - Drilling and well-servicing structures
GB/T 25428-2015	English	1009	Add to Cart	7 days [Need to translate]	Petroleum and natural gas industries -- Drilling and production equipment -- Drilling and well-servicing structures
GB/T 25428-2010	English	RFQ	ASK	9 days [Need to translate]	Petroleum and natural gas industries -- Drilling and production equipment -- Drilling and well-servicing structures

GB/T 25428-2025: Petroleum and natural gas industries - Drilling and production equipment - Drilling and well-servicing structures

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 75.180.10 CCSE92 National Standards of the People's Republic of China Replaces GB/T 25428-2015 Oil and gas industry drilling and production equipment Drilling and workover derricks and bases Implemented on July 1, 2026 State Administration for Market Regulation The State Administration for Standardization issued a statement.

Table of contents

Preface III 1.Scope 1 2 Normative References 1 3.Terms and Definitions 1 4.Classification and Representation Methods 4.1 Method for designating derrick models 4.2 Base Model Designation Method 5 4.3 Overhead Crane Model Designation Method 6 5 Technical Requirements 6 5.1 General Rules 6 5.2 Basic Parameters 6 5.3 Structural safety level 6 5.4 Allowable strength 7 6 Design 8 6.1 General Rules 8 6.2 Structural Analysis and Stability Design 9 6.3 Design Conditions 9 6.4 Design load 10 6.5 Design Validation 20 6.6 Design Confirmation 20 7 Quality Control 20 7.1 General Rules 20 7.2 Quality control personnel qualifications 20 7.3 Test Equipment 21 7.4 Traceability 21 7.5 Material 21 7.6 Welding 22 7.7 NDE 23 7.8 Process Quality 24 7.9 Customer Inspection 24 7.10 Required Confirmation Process 24 8.Testing and Inspection 25 8.1 General Rules 25 8.2 Test Item 25 8.3 Inspection Rule 26 9.Mark 27 9.1 General Rule 27 9.2 Nameplate information for tower-shaped and portable derricks 27 9.3 Well workover rig derrick nameplate information 27 9.4 Base nameplate information 28 9.5 Overhead Crane Nameplate Information 28 10 Documents 29 10.1 General Rule 29 10.2 Manufacturer-preserved documents 29 10.3 Accompanying documents upon equipment delivery 29 11 Storage, packaging and transportation 30 11.1 Store for 30 days 11.2 Packaging 30 11.3 Transportation 31 Appendix A (Normative) Additional Requirements 32 A.1 SR1---Low Temperature Test 32 A.2 SR2---Verification Load Test 32 A.3 SR3---Datasheet 32 Appendix B (Informative) Procurement Guidelines 34 B.1 Consultation Information 34 B.2 Procurement Information 34

Foreword

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents". Drafting. This document supersedes GB/T 25428-2015 "Drilling and Workover Equipment for the Oil and Gas Industry - Drilling Rigs and Bases", and is consistent with... Compared with GB/T 25428-2015, apart from structural adjustments and editorial changes, the main technical changes are as follows. a) The scope has been changed (see Chapter 1, Chapter 1 of the.2015 edition); b) Some terms and definitions have been changed (see Chapter 3, Chapter 3 of the.2015 edition), and "second-floor platform," "clearance height," and "permitted use strength" have been added. The terms and definitions for “degree,” “heave,” and “qualified personnel” are revised (see 3.7, 3.10, 3.13, 3.27, and 3.33), and the term “tower-type derrick” is removed. Height of lightweight derrick without rope; Height of lightweight derrick with rope (see 3.15 and 3.16 in the.2015 edition); c) A new chapter on "Technical Requirements" has been added, and the content regarding Structural Security Levels (SSL) has been revised and incorporated (see Chapter 5,.2015). Chapter 6 of the edition); d) The relevant content of "Design Loads" has been changed (see Chapter 6, and Chapters 7 and 8 of the.2015 edition); e) The requirements for materials and welding were changed and integrated into quality control, while the purchaser's requirements for inspection and rejection were removed (see...). Chapter 7 (Chapters 9-11 in the.2015 edition); f) A new chapter on "Experimentation and Verification" has been added (see Chapter 8); g) The "signature" requirements have been changed (see Chapter 9, Chapter 5 of the.2015 edition); h) Changed the requirements for manufacturer-saved files (see 10.1.1, 12.1 in the.2015 version); added a diagram showing the location of mobile devices (see...). Figure 6); i) A new chapter on "Storage, Packaging and Transportation" has been added (see Chapter 11); j) The requirements for impact testing and weld evaluation have been changed (see Appendix A, Appendix A of the.2015 edition). Please note that some content in this document may involve patents. The issuing organization of this document assumes no responsibility for identifying patents. This document was proposed and is under the jurisdiction of the National Technical Committee on Standardization of Petroleum Drilling Equipment and Tools (SAC/TC96). This document was drafted by. Baoji Petroleum Machinery Co., Ltd., China Oilfield Services Limited, and China National Petroleum Corporation Offshore Engineering Co., Ltd. Engineering Co., Ltd., Exploration and Development Research Institute of China National Petroleum Corporation, Sichuan Petroleum Drilling Engineering Co., Ltd. Sichuan Kete Testing Technology Co., Ltd., Sinopec Fourth Machinery Petroleum Machinery Co., Ltd., Nanyang Second Machinery Petroleum Equipment Group Co., Ltd. Sichuan Honghua Petroleum Equipment Co., Ltd., Shandong Gaoyuan Gas Equipment Co., Ltd., and Lanzhou Lanshi Petroleum Equipment Engineering Co., Ltd. The main drafters of this document are. Hou Min, Chen Degang, Wei Peijing, Zhao Shunqiang, Cao Xiaoyu, Shan Zhengfeng, Xu Binrong, Han Ruijing, and Yang Xiuju. Li Yahui, Zheng Hao, Zhou Yonglin, Lei Zheng, Wang Wenchao, Jia Tao, Yu Lijun, Yang Qionghua, Chen Xianqiu, Zhao Tao, Yang Jianping, Zhang Youhui. This document was first published in.2010, revised for the first time in.2015, and this is the second revision. Oil and gas industry drilling and production equipment Drilling and workover derricks and bases

1 Scope

This document specifies the technical requirements, design, quality control, and testing procedures for derricks and bases used in drilling and well workover operations in the oil and gas industry. Inspection, marking, documentation, storage, packaging and transportation. This document applies to all new steel tower derricks and portable derricks (including cable-stayed portable derricks and workover rig portable derricks). The design, manufacture, testing, and inspection of the base. Note. This document provides two product specification levels, PSL1 and PSL2.PSL1 includes the practices currently commonly practiced in the manufacturing industry, and PSL2 includes all the practices of PSL1. There are requirements and additional requirements.

2 Normative references

The contents of the following documents, through normative references within the text, constitute essential provisions of this document. Dated citations are not included. For references to documents, only the version corresponding to that date applies to this document; for undated references, the latest version (including all amendments) applies. This document. GB/T 229 Metallic materials Charpy impact test method GB/T 2970 Ultrasonic Testing Methods for Thick Steel Plates GB/T 9445 Qualification and Certification of Nondestructive Testing Personnel GB/T 19190 Drilling and hoisting equipment for the oil and gas industry GB/T 23505 Drilling rigs and workover rigs for the oil and gas industry GB 50009 Load Code for Building Structures GB 50011 Code for Seismic Design of Buildings GB 50017 Standard for Design of Steel Structures GB 50135 Standard for Design of Tall Structures GB 50205 Standard for Acceptance of Construction Quality of Steel Structures GB 50661 Code for Welding of Steel Structures SY/T 5170 Steel Wire Rope for Oil and Gas Industry SY/T 6666 Recommended practices for the selection and maintenance of steel wire ropes for the oil and gas industry SY/T 10030 Recommended Practices for Planning, Design and Construction of Offshore Fixed Platforms. Working Stress Design Method ISO.19901-1 Particular requirements for marine structures in the oil and gas industry – Part 1.Marine hydrometeorological design and operations (Pe-

3 Terms and Definitions

The following terms and definitions apply to this document. ...