Path:
Home >
GB/T >
Page493 > GB/T 25268-2010
Price & Delivery
US$414.00 · In stock · Download in 9 secondsGB/T 25268-2010: Rubber -- Guide to the use of curemeter
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See
step-by-step procedureStatus: Valid
| Std ID | Version | USD | Buy | Deliver [PDF] in | Title (Description) |
| GB/T 25268-2010 | English | 414 |
Add to Cart
|
4 days [Need to translate]
|
Rubber -- Guide to the use of curemeter
|
Click to Preview a similar PDF
Basic data
| Standard ID | GB/T 25268-2010 (GB/T25268-2010) |
| Description (Translated English) | Rubber -- Guide to the use of curemeter |
| Sector / Industry | National Standard (Recommended) |
| Classification of Chinese Standard | G40 |
| Classification of International Standard | 83.060 |
| Word Count Estimation | 21,250 |
| Date of Issue | 2010-09-26 |
| Date of Implementation | 2011-08-01 |
| Quoted Standard | GB/T 9869; GB/T 9881 |
| Adopted Standard | ISO 6502-1999, IDT |
| Regulation (derived from) | National Standard Approval Announcement 2010 No.6 (Total No.161) |
| Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China |
| Summary | This standard specifies the determination of the characteristics of vulcanized rubber compound with a rheometer guide. |
GB/T 25268-2010: Rubber -- Guide to the use of curemeter
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rubber. Guide to the use of curemeters
ICS 83.060
G40
National Standards of People's Republic of China
Rubber rheometer Guide
(ISO 6502.1999, IDT)
Issued on. 2010-09-26
2011-08-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard is identical with ISO 6502.1999 "Rubber rheometer Guide" (in English).
This standard is equivalent translation ISO 6502.1999.
For ease of use, this standard made the following editorial changes.
a) "this International Standard" be replaced by "this standard";
b) use a decimal point instead of a decimal comma ",". ",";
c) Remove the preface to international standards.
This standard Annex A, Annex B and Annex C is informative appendix.
The standard proposed by China Petroleum and Chemical Industry Association.
This standard by the national Common test methods for rubber and rubber goods Technical Committee of Standardization Technical Committee (SAC/TC35/SC2)
Centralized.
This standard was drafted. Friends of Shenzhen Electronic Instrument Co., Ltd. in Beijing, Beijing Rubber Industry Research and Design Institute.
Drafters of this standard. Li Jie.
Introduction
Currently a large number of different types of curing device is being used, than in the past and there have been major developments, in particular the non-rotor rheometer. DETAILED alone
No rotor rheometer, may limit its future development, it is necessary to develop a more generic file. Therefore, the decision to provide this guide, in order to
The design and use of general cure meter.
Rubber rheometer Guide
Warning --- personnel should use this standard regular laboratory work experience. This standard does not point out all possible security asked
question. Users have the responsibility to take appropriate safety and health practices and to ensure compliance with the conditions relevant national regulations.
1 Scope
This standard gives the characteristics of vulcanized rubber compound was measured by rheometer guide.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
Determination of GB/T 9869 rubber vulcanization characteristics (oscillating disc rheometer method) (GB/T 9869-1997, ISO 3417.1991,
IDT)
GB/T 9881 Rubber Terminology (GB/T 9881-2008, ISO 1382.2008, MOD)
3 Terms and Definitions
GB/T 9881 and established the following terms and definitions apply to this standard.
3.1
Oscillating disc rheometer ocscilating-disccuremeter
ODC
The force applied to the rubber compound is produced by oscillating disc embedded in the sample, and the sample is placed in a sealed cavity pressurized sulfur
Digitizer.
3.2
No rotor rheometer rotorlesscuremeter
RCM
Two by the vibration mode constitute one sample was placed in the cavity to produce a rheometer force exerted on the rubber compound.
NOTE. Rotorless instrument types are listed in Chapter 5, is shown in Figure 3 to 7.
3.3
Modulus increasing vulcanization marching-moduluscure
At the curing temperature, modulus increased rapidly, but that is slowly and continuously into curing type reaches a maximum elevation.
3.4
Curing characteristics vulcanizationcharacteristics
The vulcanization curve reflects the characteristics (see Figure 1).
Note. further instructions are given in Chapter 4.
3.5
Rigidity stiffness
It represents the modulus or resistance to general terms of stress.
Note. Because the force and torque has generally accepted scientific meaning, so no detailed explanation here.
4 Fundamentals
Mix of properties in the curing process will change, curing characteristics as a function of time and temperature by measuring the characteristics of mix
...
