GB/T 24583.4-2019 PDF English
Price & Delivery
US$150.00 · In stock · Download in 9 secondsGB/T 24583.4-2019: Vanadium-nitrogen - Determination of carbon content - Infrared absorption method
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid
GB/T 24583.4: Historical versions
| Standard ID | USD | BUY PDF | Delivery | Standard Title (Description) | Status |
| GB/T 24583.4-2019 | 150 | Add to Cart | Auto, 9 seconds. | Vanadium-nitrogen - Determination of carbon content - Infrared absorption method | Valid |
| GB/T 24583.4-2009 | 279 | Add to Cart | 3 days | Vanadium -- Nitrogen alloy -- Determination carbon of content -- The infrared absorption method | Obsolete |
Click to Preview this PDF
Similar standards
GB/T 24583.4-2019: Vanadium-nitrogen - Determination of carbon content - Infrared absorption method
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT24583.4-2019NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 77.100 H 11 Replacing GB/T 24583.4-2009 Vanadium-nitrogen - Determination of carbon content - Infrared absorption method ISSUED ON: JUNE 04, 2019 IMPLEMENTED ON: MAY 01, 2020 Issued by: State Administration of Market Regulation; Standardization Administration of the People's Republic of China.
Table of Contents
Foreword ... 3 1 Scope ... 5 2 Normative references ... 5 3 Principle ... 6 4 Reagents and materials ... 6 5 Instruments and equipment ... 6 6 Sampling and sample preparation ... 8 7 Analysis steps ... 8 8 Representation of analysis results ... 9 9 Precision ... 10 10 Test report... 10 Annex A (normative) Flow chart of the acceptance procedure of sample analysis values ... 11 Annex B (informative) Raw data of joint precision tests ... 12Foreword
GB/T 24583, the analysis method of vanadium-nitrogen, consists of 8 parts: - GB/T 24583.1 Vanadium-nitrogen - Determination of vanadium content - Ammonium ferrous sulfate titration method; - GB/T 24583.2 Vanadium-nitrogen - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas; - GB/T 24583.3 Vanadium-nitrogen - Determination of nitrogen content - Distillation-neutralization titration method; - GB/T 24583.4 Vanadium-nitrogen - Determination of carbon content - Infrared absorption method; - GB/T 24583.5 Vanadium-nitrogen - Determination of phosphorus content - Bismuth molybdenum blue spectrophotometric method; - GB/T 24583.6 Vanadium-nitrogen - Determination of sulfur content - Infrared absorption method; - GB/T 24583.7 Vanadium-nitrogen - Determination of oxygen content - Infrared absorption method; - GB/T 24583.8 Vanadium-nitrogen - Determination of silicon, manganese, phosphorus, aluminum content - Inductively coupled plasma atomic emission spectrometric method. This Part is Part 4 of GB/T 24583. This Part is drafted in accordance with the rules given in GB/T 1.1-2009. This Part replaces GB/T 24583.4-2009 “Vanadium-nitrogen alloy - Determination carbon of content - The infrared absorption method”. Compared with GB/T 24583.4-2009, the main technical changes are as follows: - MODIFY the “Normative references” (see Clause 2 of this Part, Clause 2 of 2009 edition); - MODIFY the description of the principle (see Clause 3 of this Part, Clause 3 of 2009 edition); - MODIFY the purity of oxygen (see 4.7 of this Part, 4.7 of 2009 edition); - MODIFY the taking and preparation method of samples (see Clause 6 of this Part, Clause 6 of 2009 edition); Vanadium-nitrogen - Determination of carbon content - Infrared absorption method CAUTION -- The personnel using this Part shall have hands-on experience in formal laboratory work. This Part does not address all possible safety issues. It is the responsibility of the user to take appropriate safety and health measures and to ensure compliance with the conditions set by the relevant national regulations.1 Scope
This Part of GB/T 24583 specifies the infrared absorption method for the determination of carbon content in vanadium-nitrogen. This Part applies to the determination of carbon content in vanadium-nitrogen. The determination range (mass fraction): 1.00 % ~ 15.00 %.2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 6379.1 Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions GB/T 6379.2 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method GB/T 8170 Rules of rounding off for numerical values & expression and judgement of limiting values GB/T 20567 Vanadium-nitrogen compensation of the blank value when determining the sample. 7.5 Calibration test 7.5.1 According to the carbon content of the sample to be tested, select the appropriate range or channel, and select at least two reference samples (the carbon content range of the reference samples shall cover the carbon content of the sample to be tested). The calibration is performed in turn, and the fluctuation of the determination result shall be within the range of the reproducibility limit R to confirm the linearity of the system, otherwise the linearity of the system shall be adjusted according to the instructions of the instrument. 7.5.2 For different ranges or channels, the blank value shall be determined and calibrated separately. 7.5.3 When the analysis conditions change, if the instrument has not been preheated to 1 h and the blank value of the oxygen source, crucible or flux changes, the blank is required to be re-determined and calibrated. 7.6 Determination 7.6.1 According to the carbon content range of the sample to be tested, select the best analysis conditions of the instrument: such as the setting of the burning time of the instrument, the comparison level (or the number of settings). 7.6.2 PLACE the sample (see 7.2) in a crucible (see 4.9); COVER with 0.5 g of pure iron (see 4.5), 0.2 g of tin granules (see 4.6) and 1.5 g of tungsten granules (see 4.4); PLACE the crucible on the crucible holder of the furnace base, OPERATE according to the instructions of the instrument; DETERMINE and READ the results.8 Representation of analysis results
If the absolute value of the difference between two independent analysis results of the same sample is not greater than the repeatability limit r, the arithmetic mean is taken as the analysis result. If the absolute value of the difference between the two independent analysis results is greater than the repeatability limit r, then the number of measurements is increased according to the provisions of Annex A and the analysis result is determined. The analysis result is rounded off to two decimal places according to GB/T 8170. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
