Path: Home > GB/T > Page249 > GB/T 22317.1-2008

Price & Delivery

US$514.00 · In stock · Download in 9 seconds
GB/T 22317.1-2008: Piezoelectric filters of assessed quality -- Part 1: Generic specification
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid

Std ID	Version	USD	Buy	Deliver [PDF] in	Title (Description)
GB/T 22317.1-2008	English	514	Add to Cart	4 days [Need to translate]	Piezoelectric filters of assessed quality -- Part 1: Generic specification

GB/T 22317.1-2008: Piezoelectric filters of assessed quality -- Part 1: Generic specification

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Piezoelectric filters of assessed quality Part 1. Generic specification ICS 31.140; 31.160 L21 National Standards of People's Republic of China GB/T 22317.1-2008/IEC 60368-1.2000 Piezoelectric filters of assessed quality Part 1. Generic specification (IEC 60368-1.2000, IDT) Posted 2008-08-06 2009-01-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅲ 1 General 1 1.1 Scope 1 1.2 Normative references 1 1.3 Priority 2 2 2 terms and general requirements 2.1 Overview 2 2.2 Terms and Definitions 2 2.3 Priority ratings and characteristics 9 2.4 mark 10 3 Quality assessment procedures 10 3.1 The initial stage of manufacture 10 3.2 10 structurally similar elements 3.3 Subcontracting 10 3.4 merge element 11 3.5 factory approved 11 Approval procedure 11 3.6 11 3.7 capability approval procedure 3.8 Qualification approval procedures 12 3.9 Test Procedure 12 Screening Requirements 12 3.10 Rework and repair 12 3.11 3.12 has been qualified test records 12 3.13 backorder 12 Delivery Release 3.14 12 3.15 does not check the parameter 12 4 12 test and measurement procedures 4.1 Overview 12 4.2 Test and measurement conditions 13 4.3 Visual inspection 13 4.4 dimensional inspection and measurement procedures 13 4.5 Electrical Test Procedure 14 4.6 mechanical and environmental testing procedures 17 4.7 Durability Test Procedure 20 Symbols Figure 1 3 monolithic filters Symbol 2 3 cascaded monolithic filters Figure 3 monolithic multi-pole coupled resonator symbol 4 GB/T 22317.1-2008/IEC 60368-1.2000 Attenuation characteristics of the transmission filter 4 6 5 7 shape factor of the bandpass filter Figure 6 filter passband 8 Figure 7 passband attenuation offset 8 8 insertion loss, phase delay and envelope delay test circuit 14 9 return loss test circuit 16 10 intermodulation distortion test circuit 16 References 21 GB/T 22317.1-2008/IEC 60368-1.2000

Foreword

GB/T 22317 "Piezoelectric filters of assessed quality" is divided into the following parts. --- Part 1. Generic specification; --- Part 2. Guide; --- Part 3. Sectional specification - Capability approval; --- Part 3-1. Blank detail specification - Capability approval. This section GB/T Part of 122,317. This section identical with IEC 60368-1.2000 "Piezoelectric filters of assessed quality - Part 1. Generic specification" (in English). For ease of use, this section made the following editorial changes. --- Delete foreword international standards; --- The Normative references to national standards instead of the file in our part of the IEC standard with corresponding. This section proposed by the People's Republic of China Ministry of Information Industry. This part of the National frequency control and selection Standardization Technical Committee centralized piezoelectric device. This section drafted by. China Electronic Components Industry Association Branch of the piezoelectric crystal. The main drafters of this section. Zhang Yi, Jiang Liansheng. GB/T 22317.1-2008/IEC 60368-1.2000 Piezoelectric filters of assessed quality Part 1. Generic specification

1 General

1.1 Scope This section GB/T 22317 specifies the test side of the capability approval procedures or qualification approval procedures for assessing the quality of the piezoelectric filter Law and general requirements. 1.2 Normative references The following documents contain provisions which, through reference GB/T 22317 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 2421-1999 Environmental testing for electric and electronic products - Part 1. General (idt IEC 60068-1. 1988) GB/T 2423.1-2001 Environmental testing for electric and electronic products Part 2. Test methods Test A. Cold (idt IEC 60068-2-1.1990) GB/T 2423.2-2001 Environmental testing for electric and electronic products Part 2. Test methods Test B. high temperature (idt IEC 60068-2-2. 1974) GB/T 2423.3-2006 Environmental testing for electric and electronic products Part 2. Test methods - Test Cab. Damp heat test (IEC 60068-2-78.2001, IDT) GB/T 2423.4-2008 Environmental testing for electric and electronic products Part 2. Test methods - Test Db Damp (12h + 12h cycle) (IEC 60068-2-30.2005, IDT) GB/T 2423.5-1995 Environmental testing for electric and electronic products Part 2. Test methods Test Ea and guidance. Shock (Idt IEC 60068-2-27. 1987) GB/T 2423.6-1995 Environmental testing for electric and electronic products Part 2. Test methods - Test Eb and guidance. Bump (Idt IEC 60068-2-29. 1987) GB/T 2423.8-1995 Environmental testing for electric and electronic products Part 2. Test methods Test Ed. Free fall (idt IEC 60068-2-32.1990) GB/T 2423.10-1995 Environmental testing for electric and electronic products Part 2. Test methods - Test Fc and guidance. Vibration (n Chord) (idt IEC 60068-2-6. 1982) GB/T 2423.15-1995 Environmental testing for electric and electronic products Part 2. Test methods - Test Ga and guidance. Acceleration, steady state Degree (idt IEC 60068-2-7. 1983) GB/T 2423.16-1999 Environmental testing for electric and electronic products Part 2. Test methods Test J and guidance. Mould growth (Idt IEC 60068-2-10. 1988) GB/T 2423.18-2000 Environmental testing for electric and electronic products Part 2. Test methods - Test Kb. Salt mist, cyclic (chloride Sodium) (idt IEC 60068-2-52.1996) GB/T 2423.21-1991 electric and electronic products environmental testing procedures Test M. Low Voltage Test Method (neqIEC 60068- 2-13. 1983) GB/T 2423.22-2002 Environmental testing for electric and electronic products Part 2. Test methods - Test N. Temperature change (IEC 60068-2-14. 1984, IDT) GB/T 22317.1-2008/IEC 60368-1.2000 ...