Path:
Home >
GB/T >
Page723 > GB/T 19190-2025
Price & Delivery
US$1019.00 · In stock · Download in 9 secondsGB/T 19190-2025: Petroleum and natural gas industries - Drilling and production hoisting equipment
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See
step-by-step procedureStatus: Valid
GB/T 19190: Historical versions
| Std ID | Version | USD | Buy | Deliver [PDF] in | Title (Description) |
| GB/T 19190-2025 | English | 1019 |
Add to Cart
|
7 days [Need to translate]
|
Petroleum and natural gas industries - Drilling and production hoisting equipment
|
| GB/T 19190-2013 | English | 1129 |
Add to Cart
|
8 days [Need to translate]
|
Petroleum and natural gas industries -- Drilling and production hoisting equipment
|
| GB/T 19190-2003 | English | RFQ |
ASK
|
5 days [Need to translate]
|
Petroleum and natural gas industries -- Drilling and production equipment -- Hoisting equipment
|
Click to Preview a similar PDF
Basic data
| Standard ID | GB/T 19190-2025 (GB/T19190-2025) |
| Description (Translated English) | Petroleum and natural gas industries - Drilling and production hoisting equipment |
| Sector / Industry | National Standard (Recommended) |
| Classification of Chinese Standard | E92 |
| Classification of International Standard | 75.180.10 |
| Word Count Estimation | 50,524 |
| Date of Issue | 2025-10-31 |
| Date of Implementation | 2026-05-01 |
| Older Standard (superseded by this standard) | GB/T 19190-2013 |
| Issuing agency(ies) | State Administration for Market Regulation, Standardization Administration of China |
GB/T 19190-2025: Petroleum and natural gas industries - Drilling and production hoisting equipment
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 75.180.10
CCSE92
National Standards of the People's Republic of China
Replaces GB/T 19190-2013
Oil and gas industry drilling and hoisting equipment
Published on 2025-10-31
Implemented on May 1, 2026
State Administration for Market Regulation
The State Administration for Standardization issued a statement.
Table of contents
Preface III
1.Scope 1
2 Normative References 1
3.Terms, Definitions, and Abbreviations 2
3.1 Terms and Definitions 2
3.2 Abbreviations 3
4.Classification and Representation Methods
5 Technical Requirements 4
5.1 General Rules 4
5.2 Basic Parameters 5
5.3 Structural Dimensions 5
6 Design 14
6.1 General Rule 14
6.2 Design Conditions 14
6.3 Strength Analysis 15
6.4 Specification Grade 17
6.5 Rated load 17
6.6 Design safety factor 17
6.7 Shear strength 18
6.8 Falling objects 18
6.9 Specific Equipment 18
6.10 Design Changes 20
6.11 Design Documents 20
7 Quality Control 20
7.1 General Rules 20
7.2 Personnel Qualifications 21
7.3 Test Equipment 21
7.4 Traceability 21
7.5 Material 21
7.6 Welding 25
7.7 Visual inspection and NDE 27
7.8 Dimensional Inspection 31
7.9 Required Confirmation Process 31
8.Testing and Inspection 31
8.1 Design and verification experiment 31
8.2 Verification Load Test 34
8.3 Hydrostatic pressure test 34
8.4 Functional Test 35
8.5 Inspection Rule 35
9.Mark 35
9.1 General Equipment Marking 35
9.2 Specific Equipment Marking 36
9.3 Marking Method 36
9.4 Traceability 36
10 Documents 36
10.1 General Rule 36
10.2 Documents kept by the manufacturer 36
10.3 Random files carried by the device 37
11 Packaging, Transportation and Storage 37
11.1 Packaging 37
11.2 Transportation 37
11.3 Storage 37
Appendix A (Normative) Additional Requirements 38
A.1 General Rule 38
A.2 SR1 Verification Load Test 38
A.3 SR2 Low Temperature Test 38
A.4 SR3 Datasheet 38
A.5 Supplementary volume inspection of SR4 casting 38
A.6 Volumetric Inspection of SR5 Forgings 38
A.7 SR6 Post-expansion Stress Relief Structure 39
Appendix B (Informative) Evaluation of Heat Treatment Equipment 40
B.1 Temperature tolerance 40°C
B.2 Verification of the heat treatment furnace 40
B.3 Instrument 41
References 42
Foreword
This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents".
Drafting.
This document supersedes GB/T 19190-2013 "Drilling and Lifting Equipment for the Oil and Gas Industry" and is consistent with GB/T 19190-2013.
In comparison, aside from structural adjustments and editorial changes, the main technical changes are as follows.
---The scope of application has been changed (see Chapter 1, Chapter 1 of the.2013 edition);
---The term "bearing rated load" has been changed to "bearing rated dynamic load" (see 3.1,.2013 edition), and "same design" has been removed.
Seven terms and definitions, including "principle" (see sections 3.1.7, 3.1.8, and 3.1.16–3.1.20 of the.2013 edition);
---Added classification models and representation methods for lifting equipment (see Chapter 4);
---General rules for improving equipment technical requirements have been added (see 5.1);
---Added basic parameter specifications for lifting equipment (see 5.2);
---Added structural dimensional requirements for connectors (see 5.3.4);
---The thread requirements for gooseneck tube connections have been changed [see 5.3.8.2b, 9.9.4 in the.2013 edition];
---Requirements for rolling bearings, pressure vessels, and pipelines have been removed (see 9.14 and 9.15 of the.2013 edition);
---The requirement to increase the safety factor of pulley design has been added (see 6.9.1);
---The size range of shadow A has been changed (see Figure 12, Figure 5 in the.2013 version);
---The requirement for reduction of area in the thickness direction of steel plates has been changed (see 7.5.3.3, 6.3.6 in the.2013 version);
---The range of yield strengths for elongation requirements has been changed (see Table 15, Table 3 in the.2013 edition);
---Acceptance requirements for surface NDE and volume NDE of welds have been added (see 7.7.5.4);
---Added the requirement that fatigue life be evaluated before products that have undergone design verification testing leave the factory (see 8.1.1.3);
---Requirements for non-destructive testing and first-article load testing have been added (see 8.1.1.4);
---The flag requirement in APISpec 8C has been removed (see 10.1 in the.2013 version);
---The marking requirements for lifting pulleys and combination equipment have been changed (see Chapter 9, 9.2.6 and 10.3 of the.2013 edition).
Please note that some content in this document may involve patents. The issuing organization of this document assumes no responsibility for identifying patents.
This document was proposed and is under the jurisdiction of the National Technical Committee on Standardization of Petroleum Drilling Equipment and Tools (SAC/TC96).
This document was drafted by. Baoji Petroleum Machinery Co., Ltd., and the Exploration and Development Research Institute of China National Petroleum Corporation.
Nanyang No. 2 Petroleum Equipment Group Co., Ltd., CNPC National Oil and Gas Drilling Equipment Engineering Technology Research Center Co., Ltd., Lanzhou Lanshi Petrochemical Equipment Co., Ltd.
Oilfield Equipment Engineering Co., Ltd., China Petroleum Great Wall Drilling Engineering Co., Ltd., Beijing Petroleum Machinery Co., Ltd., Jiangsu Rushi Machinery
China National Machinery Industry Corporation Limited, Sinopec Fourth Machinery Petroleum Machinery Co., Ltd., and CNPC Jianghan Machinery Research Institute Co., Ltd.
The main drafters of this document are. Wang Wenjun, Yan Xiaoni, Cao Xiaoyu, Han Ruijing, Zhou Tianming, Yin Yugang, Zhang Qiang, Ye Qiang, Dong Hui, Luan Su, and Liu Fenggang.
Yang Zengbao, Xing Haonan, Xie Hongfeng, Liu Zhigang, Leng Beiyang, Du Ke, Shi Qihao, Li Yahui.
This document was first published in.2003, revised for the first time in.2013, and this is the second revision.
Oil and gas industry drilling and hoisting equipment
1 Scope
This document specifies the classification, model designation, technical requirements, design, quality control, and testing and inspection of drilling and oil production lifting equipment.
Marking, documentation and packaging, transportation and storage.
This document applies to the design, manufacture, testing, and inspection of the following drilling and oil production hoisting equipment (hereinafter referred to as "hoisting equipment").
a) Lifting pulley;
b) The traveling trolley and its large hook;
c) Connectors;
d) Drilling hook;
e) Tubing hook and sucker rod hook;
f) Rings;
g) Casing hangers, tubing hangers, drill pipe hangers, and drill collar hangers;
h) Sucker rod hanger;
i) Rotary faucet;
j) Power faucet;
k) Power sub;
l) A chuck used as a hanging clamp;
m) Dead rope fastener;
n) Drill string motion compensator;
o) A square drill pipe swivel joint used as a lifting device;
p) Water inlet tool assembly used for lifting equipment;
q) Wellhead feed tool assembly used as a hoisting device;
r) Safety catches used for lifting equipment;
s) Guide trolley for the moving equipment.
Note. This document specifies the requirements for two different product specification levels, PSL1 and PSL2.Unless otherwise specified as PSL2, the requirements in Chapters 4 through 9 shall apply.
All requirements apply to PSL1.PSL2 includes all requirements of PSL1 as well as the additional practices specified in this document.
2 Normative references
The contents of the following documents, through normative references within the text, constitute essential provisions of this document. Dated citations are not included.
For references to documents, only the version corresponding to that date applies to this document; for undated references, the latest version (including all amendments) applies.
This document.
GB/T 228.1 Metallic materials – Tensile testing – Part 1.Test method at room temperature
GB/T 229 Metallic materials Charpy impact test method
GB/T 5313 Steel plates with properties in the direction of thickness
GB/T 5677 Radiographic Inspection of Castings
GB/T 6402 Ultrasonic Testing Methods for Steel Forgings
GB/T 7233.2 Ultrasonic testing of cast steel parts – Part 2.High pressure cast steel parts
...
