Path:
Home >
GB/T >
Page35 > GB/T 14645-2014
Price & Delivery
US$259.00 · In stock · Download in 9 secondsGB/T 14645-2014: Textile fabrics -- Burning behaviour -- The 45 Degree test determination of damaged area and ignition times
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See
step-by-step procedureStatus: Valid
GB/T 14645: Historical versions
| Std ID | Version | USD | Buy | Deliver [PDF] in | Title (Description) |
| GB/T 14645-2014 | English | 259 |
Add to Cart
|
3 days [Need to translate]
|
Textile fabrics -- Burning behaviour -- The 45 Degree test determination of damaged area and ignition times
|
| GB/T 14645-1993 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Textile fabrics. Burning behaviour. The 45 Degree test determination of damaged area and ignition times
|
Click to Preview a similar PDF
Basic data
| Standard ID | GB/T 14645-2014 (GB/T14645-2014) |
| Description (Translated English) | Textile fabrics -- Burning behaviour -- The 45 Degree test determination of damaged area and ignition times |
| Sector / Industry | National Standard (Recommended) |
| Classification of Chinese Standard | W04 |
| Classification of International Standard | 59.080.30 |
| Word Count Estimation | 11,140 |
| Date of Implementation | 4/1/2015 |
| Older Standard (superseded by this standard) | GB/T 14645-1993 |
| Quoted Standard | GB/T 6529 |
| Regulation (derived from) | People's Republic of China Announcement of Newly Approved National Standards 2014 No. 22 |
| Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China |
| Summary | This Standard specifies two methods textiles 45 �� direction using surface ignition and combustion performance measurement base ignition. A method of this standard applies to all types of fabrics and products (see A method measuring point vain thick textil |
GB/T 14645-2014: Textile fabrics -- Burning behaviour -- The 45 Degree test determination of damaged area and ignition times
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Textile fabrics. Burning behaviour. The 45 Degree test determination of damaged area and ignition times
ICS 59.080.30
W04
National Standards of People's Republic of China
Replacing GB/T 14645-1993
Textiles - burning behavior 45 ° direction
Determination damaged area and ignition times of
Textiles-Burningbehaviour-45 ° test
Issued on. 2014-09-30
2015-04-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard replaces GB/T 14645-1993 "textile fabric flammability 45 ° damaged area and ignition times determination", and
GB/T 14645-1993 compared to the main changes are as follows.
--- Modify the scope of the original standard;
--- Added "ignition timing" term;
--- Modify the original standard combustion chamber of the diagram (see Figure 1);
--- Modify the original schematic diagram of a standard sample folder (see Figure 2), increase the sample holder upper and lower two schematic diagram (see Figures 3 and 4);
--- Increasing the B sample support law coil test diagram (see Figure 6), modified the original standard test stand (see Figure 5);
--- Chapter 7, "Sample Preparation", an increase of yarn sampling instructions;
--- The 7.3 Method B The humidity is amended as first specimen mounted on the specimen supporting coil then the humidity treatment;
--- Original standard test procedure 8.1.1 and 8.2.1 of the content separately as Chapter 8, "Test conditions";
--- Basic retain the original standard test procedure in Chapter 9 of the main technical content of the re-test procedure is described;
--- Added "calculated results" chapter.
The standard proposed by China Textile Industry Association.
The standard basis by the National Textile Standards Technical Committee of Standardization Technical Committee (SAC/TC209/SC1) centralized.
This standard was drafted. Textile Standard (Beijing) Co., Inspection and Certification Center.
The main drafters of this standard. Xu Road, Liu Feifei.
This standard replaces the standards previously issued as follows.
--- GB/T 14645-1993.
Textiles - burning behavior 45 ° direction
Determination damaged area and ignition times of
1 Scope
This standard specifies two methods textiles 45 ° direction using surface ignition and combustion performance of the base ignition determination.
A method of this standard applies to all types of fabrics and products (see A method of measuring point vain thick textile Appendix A); B method is suitable for
Heat melted yarns and fabrics.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 6529 Textiles Standard conditioning and testing atmosphere
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
Continued burning time afterflametime
Under test conditions, remove the ignition source material after sustained flaming combustion time. Expressed in seconds.
[GB/T 3291.3-1997, the definition 2.145]
3.2
Smoldering time afterglowtime
When under the test conditions specified, when flaming termination, or this is by flameless combustion, after removal of the source of fire, the material continued flameless combustion
between. Expressed in seconds.
[GB/T 3291.3-1997, the definition 2.146]
3.3
Damage length damagedlength
Under the test conditions specified in the predetermined direction of the material damage to the maximum length of the part. Expressed in centimeters.
[GB/T 3291.3-1997, the definition 2.157]
3.4
Damaged area damagedarea
Under test conditions, the material damage caused by heat and the total area of \u200b\u200bnon-recovery. It comprises a material loss, shrinkage, softening, melting
Melting, charring, combustion and pyrolysis and the like. In square centimeters.
[GB/T 3291.3-1997, the definition 2.156]
3.5
Ignition timing flameapplicationtime
Flame ignition source is applied to the time the specimen.
[GB/T 8746-2009, Definition 3.1]
...
