Path: Home > GB/T > Page215 > GB/T 14397-2008

Price & Delivery

US$314.00 · In stock · Download in 9 seconds
GB/T 14397-2008: Information technology -- Telecommunication and information exchange between systems -- Start-stop transmission signal quality at DTE/DCE interfaces
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid

Std ID	Version	USD	Buy	Deliver [PDF] in	Title (Description)
GB/T 14397-2008	English	314	Add to Cart	3 days [Need to translate]	Information technology -- Telecommunication and information exchange between systems -- Start-stop transmission signal quality at DTE/DCE interfaces
GB/T 14397-1993	English	359	Add to Cart	3 days [Need to translate]	Information processing--Start-stop transmission signal quality at DTE/DCE interfaces

GB/T 14397-2008: Information technology -- Telecommunication and information exchange between systems -- Start-stop transmission signal quality at DTE/DCE interfaces

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Information technology. Telecommunication and information exchange between systems. Start-stop transmission signal quality at DTE/DCE interfaces ICS 35.100.10 L78 National Standards of People's Republic of China GB/T 14397-2008/ISO /IEC 7480.1991 Replacing GB/T 14397-1993 Information technology - Telecommunications and information exchange DTE/DCE interface Start-stop transmission signal quality (ISO /IEC 7480.1991, IDT) Posted 2008-07-28 2009-01-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Preface Ⅰ Introduction Ⅱ 1 Scope 1 2 Normative references 1 3 Terms and definitions 2 DTE sending the signal quality 4 4 4.1 DTE sending distortion 5 4.2 character intervals of 5 4.3 The modulation rate accuracy of 5 5 receives DTE tolerance of 5 Receiver tolerance 5.1 5 5.2 character intervals of 5 5.3 The minimum duration of the start symbol 6 6 interchangeable measuring 6 points 6.1 CCITT Recommendation V. 28 Characteristics of measurement generator 6 6.2 CCITT Recommendation V. Measuring 28 on the load side 7 6.3 CCITT Recommendation V. Measuring characteristic generator 10 7 6.4 CCITT Recommendation V. Measuring 810 on the load side 6.5 CCITT Recommendation V. Measuring characteristic generator 9 11 6.6 CCITT Recommendation V. Measuring the load side 10 11 The accuracy of the measuring equipment 10 6.7 Appendix A (informative) asynchronous transmission signal quality at the interface --- mathematical relationship between the signal quality parameters 11 GB/T 14397-2008/ISO /IEC 7480.1991

Foreword

This standard is identical with the international standard ISO /IEC 7480.1991 Flat "Information technology - Telecommunications and information exchange DTE / DCE interface signal quality at the start-stop transmission "(in English). This standard replaces GB/T 14397-1993 "Information processing DTE/Start-stop transmission signal quality of DCE interface." This standard and GB/T 14387-1993 compared to the main changes are as follows. --- Remove the previous version of the content rate characteristics. Appendix A of this standard is the data appendix. This standard by the National Information Technology Standardization Technical Committee and centralized. This standard was drafted. China Electronics Standardization Institute. The main drafters of this standard. Guo Nan, Huang Jiaying, Xu Dongmei, Zhang Cui, Zhang Hui. This standard was first published in 1993. GB/T 14397-2008/ISO /IEC 7480.1991

Introduction

This standard is intended to supplement the electrical characteristics specified in CCITTV series of recommendations, and to provide the above-mentioned series CCITTV Measure the transmission signal quality characteristic of recommendations not included in the document. Start - stop transmission signal quality equipment should meet the requirements of part depending on the application, the timing depends in part on the export of equipment used mechanism. For early start-stop transmission equipment, the timing is controlled by a mechanical source and export, but now more common electron source. Another factor is that since most of the start-stop transmission are inherently carry the signaling transmitting and receiving devices between the Timing information. Start-stop equipment can be interfaced to a converter which converts encoded information within a synchronous transmission system, in this case Under conditions, in the quality of the signal converter interface requirements may need to be more tightly controlled. In order to include two types of applications in both types of devices, signal quality specifications of this standard given in a separate four performance classes do not. Two of (P1 and P2) for mechanical timing DTE1), for the use of two additional electronic timing DTE. by using Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. CCITT Recommendation I. 411 (1988) ISDN user-network interfaces - Reference configuration CCITT Recommendation V. 10 (1988) for unbalanced double electrical interfaces in the field of data communications for use with integrated circuit equipment usually pass Electrical characteristics of the road CCITT Recommendation V. 11 (1988) in the field of data communications through an integrated circuit device is typically used in conjunction with balanced double circuit Electrical Characteristics CCITT Recommendation V. 14 (1988) synchronous bearer channel transmission start-stop characters CCITT Recommendation V. Standardization 21 (1988) Automatic telephone exchange medium used in the 300 bit/s duplex modem CCITT Recommendation V. 22 (1988) Automatic switching network and point-wire leased telephone standardized for use on telephone-type circuits 1200 bit/s duplex modem CCITT Recommendation V. 22bis (1988) mining lease for use on telephone-type circuits in general switched telephone network and point-wire Frequency division technique standardized by 2400 bit/s duplex modem CCITT Recommendation V. 23 (1988) is automatically switched network using standardized 600/1200 baud modem on the phone CCITT Recommendation V. Definitions for interchange circuits 24 (1988) data terminal equipment and data circuit terminal equipment GB/T 14397-2008/ISO /IEC 7480.1991 ...