Path: Home > GB/T > Page725 > GB/T 12246-2025

Price & Delivery

US$279.00 · In stock · Download in 9 seconds
GB/T 12246-2025: Pilot operated pressure reducing valves
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid

Std ID	Version	USD	Buy	Deliver [PDF] in	Title (Description)
GB/T 12246-2025	English	279	Add to Cart	3 days [Need to translate]	Pilot operated pressure reducing valves
GB/T 12246-2006	English	259	Add to Cart	3 days [Need to translate]	Pilot operated pressure reducing valves
GB/T 12246-1989	English	359	Add to Cart	3 days [Need to translate]	Pilot-operated reducing valves

GB/T 12246-2025: Pilot operated pressure reducing valves

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 23.060.99 CCSJ16 National Standards of the People's Republic of China Replaces GB/T 12246-2006 pilot-operated pressure reducing valve Published on 2025-10-31 Implemented on May 1, 2026 State Administration for Market Regulation The State Administration for Standardization issued a statement.

Table of contents

Preface III 1.Scope 1 2 Normative References 1 3.Terms and Definitions 1 4.Structural Type 2 5 Technical Requirements 4 6.Test Methods 5 7 Inspection Rules 5 8.Signage and painting 6. 9 Packaging, transportation and storage 7 Figure 1.Integrated pilot-operated pressure reducing valve/pilot-operated piston pressure reducing valve 2 Figure 2.Integrated pilot-operated pressure reducing valve/pilot-operated diaphragm pressure reducing valve 3 Figure 3.Split-type pilot-operated pressure reducing valve/Pilot-operated diaphragm type pressure reducing valve 3 Table 1 Recommended Part Materials 5 Table 2.Inspection Items (6)

Foreword

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents". Drafting. This document replaces GB/T 12246-2006 "Pilot-operated pressure reducing valves". Compared with GB/T 12246-2006, the only changes are structural adjustments and editing. Aside from the sexual alterations, the main technical changes are as follows. a) The scope has been changed (see Chapter 1, Chapter 1 of the.2006 edition); b) The terms "integrated pilot-operated pressure reducing valve" and "split pilot-operated pressure reducing valve" and their definitions have been added (see Chapter 3); c) A typical structural diagram of a split-type pilot-operated pressure reducing valve has been added (see Figure 3); d) The component requirements have been removed and the requirements for the adjusting spring pressure level have been changed (see 5.2, 4.4 of the.2006 version); e) Performance requirements have been changed (see 5.3, version 4.3 from.2006); f) The signage was changed and painting requirements were added (see Chapter 8, Chapter 7 of the.2006 edition). Please note that some content in this document may involve patents. The issuing organization of this document assumes no responsibility for identifying patents. This document was proposed by the China Machinery Industry Federation. This document is under the jurisdiction of the National Technical Committee on Valve Standardization (SAC/TC188). This document was drafted by. Hefei General Machinery Research Institute Co., Ltd., Zhejiang University, and Shanghai Guanlong Valve Energy-Saving Equipment Co., Ltd. Sinopec Ningbo Engineering Co., Ltd., Shanghai Biaoyi Valve Co., Ltd., CNNC Suzhou Valve Technology Industry Co., Ltd., and Anhui Hongxing Valve Co., Ltd. Limited Liability Company, Hangzhou Chunjiang Valve Co., Ltd., Anhui Special Equipment Inspection Institute, Chengdu Chuanli Intelligent Fluid Equipment Co., Ltd., Zhejiang Ao Dehua Technology Co., Ltd., Shanghai Hang Technology Group Co., Ltd., Hangzhou Special Equipment Inspection and Research Institute (Hangzhou Special Equipment Inspection and Research Institute) Emergency Response Center), Yuanda Valve Group Co., Ltd., Jiangsu Tenglong Petrochemical Machinery Co., Ltd., Hefei Tong'an Engineering Machinery Equipment Supervision Co., Ltd. Company, China Valve Holding (Group) Co., Ltd., Zhejiang Di'ai Intelligent Control Technology Co., Ltd., Tianjin Better Fluid Control Valve Co., Ltd. Shandong Yibaitong Valve Co., Ltd., Shanghai Shengjiang Machinery Equipment Co., Ltd., and Zhengfeng Valve Group Co., Ltd. The main drafters of this document are. Chen Fengguan, Sun Fuguang, Xu Yong, Wang Jie, Li Zhong, Huang Zhimin, Han Anwei, Yan Jie, Yuan Xin, Hu Kongyou, and Zhang Wei. Wu Ganghui, Chen Wengong, Chen Tao, Du Liwei, Dai Yiming, Ma Xiangfeng, Chen Zhiwen, Yao Ludong, Li Dongming, Lü Guoqin, Ye Liquan, Wang Ye. This document was first published in 1989, revised for the first time in.2006, and this is the second revision. pilot-operated pressure reducing valve

1 Scope

This document specifies the structural type, technical requirements, test methods, inspection rules, marking and painting, packaging, and transportation of pilot-operated pressure reducing valves. Transportation and storage. This document applies to nominal sizes DN15~DN800 and nominal pressures PN10~PN100, or nominal sizes NPS⅟~NPS32. Pilot-operated pressure reducing valves with nominal pressure Class 150~Class 600, and working media including gas, liquid, and steam with temperature not exceeding 300℃. Design, production, and inspection.

2 Normative references

The contents of the following documents, through normative references within the text, constitute essential provisions of this document. Dated citations are not included. For references to documents, only the version corresponding to that date applies to this document; for undated references, the latest version (including all amendments) applies. This document. GB/T 699 High-quality carbon structural steel GB/T 1220 Stainless Steel Bars GB/T 1222 Spring Steel GB/T 1239.2-2009 Technical conditions for cold-rolled cylindrical helical springs – Part 2.Compression springs GB/T 2059 Copper and Copper Alloy Strip GB/T 3077 Alloy Structural Steel GB/T 4622 (all parts) Spiral wound gaskets for pipe flanges GB/T 9124 (all parts) Steel pipe flanges GB/T 12220 Industrial Valve Marking GB/T 12225 Technical Requirements for Copper Alloy Castings for General Valves GB/T 12226 Technical Specification for Gray Cast Iron Parts of General Valves GB/T 12227 Technical Specification for Ductile Iron Valves GB/T 12228 Technical Specification for Carbon Steel Forgings of General Valves GB/T 12229 Technical Specification for Carbon Steel Castings of General Valves GB/T 12230 Technical Requirements for Stainless Steel Castings for General Valves GB/T 12244 General requirements for pressure reducing valves GB/T 12245 Test Method for Performance of Pressure Reducing Valves GB/T 17241 (all parts) Cast iron pipe flanges GB/T 21465 Valve Terminology JB/T 106 Marking and Painting of Valves JB/T 2205 Structural Length of Pressure Reducing Valve JB/T 7928 Supply Requirements for Industrial Valves

3 Terms and Definitions

The terms and definitions defined in GB/T 12244, GB/T 12245, and GB/T 21465, as well as the following terms and definitions, apply to this document. ...