Home Cart Quotation Policy About-Us
www.ChineseStandard.net
Database: 221581 (27 Mar 2026)
SEARCH
Path: Home > GB/T > Page508 > GB/T 11546.1-2008

GB/T 11546.1-2008 PDF English

Price & Delivery

US$274.00 · In stock · Download in 9 seconds
GB/T 11546.1-2008: Plastic -- Determination of creep behaviour -- Part 1: Tensile creep
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid

GB/T 11546.1: Historical versions

Std IDVersionUSDBuyDeliver [PDF] inTitle (Description)
GB/T 11546.1-2008English274 Add to Cart 3 days [Need to translate] Plastic -- Determination of creep behaviour -- Part 1: Tensile creep
GB/T 11546-1989English319 Add to Cart 3 days [Need to translate] Plastics--Determination of tensile creep

Click to Preview a similar PDF

Basic data

Standard ID GB/T 11546.1-2008 (GB/T11546.1-2008)
Description (Translated English) Plastic -- Determination of creep behaviour -- Part 1: Tensile creep
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard G31
Classification of International Standard 83.080.01
Word Count Estimation 14,126
Date of Issue 2008-08-04
Date of Implementation 2009-04-01
Older Standard (superseded by this standard) GB/T 11546-1989
Adopted Standard ISO 899-1-2003, IDT
Regulation (derived from) National Standard Approval Announcement 2008 No.14 (Total No.127)
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies the pretreatment, plastic standard method for determining the tensile creep specimen temperature and humidity under given conditions. The method specified in this section apply to rigid and semi-rigid non-reinforced, filled and fiber reinforced plastic material (as defined in GB/T 2035-2008), applicable dumbbell directly from the sheet or molded or die machined plastic products resulting sample. The method specified in this section for engineering design, providing data research and development. Engineering data need extensometer gauge length of the specimen between the measured or examined by the quality control data may be calculated based on the change in distance between the clamp (nominal elongation). With tensile creep specimen preparation, different sample size and test environment will change greatly changed.

GB/T 11546.1-2008: Plastic -- Determination of creep behaviour -- Part 1: Tensile creep


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Plastic Determination of creep behaviour Part 1. Tensile creep ICS 83.080.01 G31 National Standards of People's Republic of China GB/T 11546.1-2008/ISO 899-1.2003 Replacing GB/T 11546-1989 Plastics - Determination of creep behavior Part 1. Tensile creep (ISO 899-1.2003, IDT) Posted 2008-08-04 2009-04-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 11546 "plastic creep performance measurement" is divided into two parts. --- Part 1. Tensile creep; --- Part 2. Three-point bending creep. This section GB/T Part of 111,546. This part identical with ISO 899-1.2003 "Plastics - Determination of creep behavior --- --- Part 1. Tensile creep" (in English). This Part replaces GB/T 11546-1989 "Determination of tensile creep of plastic." This section compared with the GB/T 11546-1989 main changes are as follows. --- Nominal increase of elongation, tensile creep strain nominal nominal tensile creep modulus definitions and formulas and applications (1.3 And 3.4,3.6,3.8); --- Calculate the total load should include a pre-load (6.5.2); --- Increase in temperature and humidity control record specific requirements (6.8); --- Increased requirements for three-dimensional representation (7.2.4) in results representation; --- Added Appendix A. Appendix A of this section is an informative annex. This part is proposed by the China Petroleum and Chemical Industry Association. GB/T 2035-2008 Plastics terms and definitions (ISO 472.1999, IDT) GB/T 2918-1998 standard plastic sample conditioning and environmental tests (idt ISO 291.1997) GB/T 19467.1-2004 plastic obtain comparable single-point data - Part 1. molding materials (ISO 10350-1. 1998, IDT) ISO 11403-1.2001 Plastics --- comparable multipoint data acquisition and representation --- Part 1. Mechanical Properties

3 Terms and Definitions

GB/T 2035-2008 and established the following terms and definitions apply to this section. 3.1 Under constant stress strain increases with time. 3.2 Gauge units between tensile load on the initial cross-sectional area, in megapascals (MPa). According to equation (1). GB/T 11546.1-2008/ISO 899-1.2003 ...

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 11546.1-2008_English be delivered?


Answer: Upon your order, we will start to translate GB/T 11546.1-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 11546.1-2008_English with my colleagues?


Answer: Yes. The purchased PDF of GB/T 11546.1-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 11546.1-2008?


Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 11546.1-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
Refund Policy Privacy Policy Terms of Service