Path: Home > MISC > Page100 > GA 614-2006

Price & Delivery

US$249.00 · In stock · Download in 9 seconds
GA 614-2006: Cut-resistant gloves for police
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure

Std ID	Version	USD	Buy	Deliver [PDF] in	Title (Description)
GA 614-2006	English	249	Add to Cart	3 days [Need to translate]	Cut-resistant gloves for police

GA 614-2006: Cut-resistant gloves for police

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Cut-resistant gloves for police ICS 13.340.99 A94 People's Republic of China Public Safety Industry Standard Police cut-proof gloves Released on.2006-04-27 Implementation of.2006-08-01 Ministry of Public Security

Foreword

The full technical content of this standard is mandatory. Appendix A of this standard is a normative appendix. This standard was proposed by the Equipment Finance Bureau of the Ministry of Public Security. This standard is under the jurisdiction of the Specialized Police Equipment Standardization Technical Committee of the Ministry of Public Security. This standard was drafted by Shenzhen Magic Shield Protective Products Co., Ltd., Special Police Equipment Quality Supervision and Inspection Center of the Ministry of Public Security, Beijing Jun Antai Protection Technology Co., Ltd., Beijing Keyada New Technology Development Corporation, Beijing Zhongtianfeng Safety Protection Technology Co., Ltd. Drafting. The main drafters of this standard. Xu Xiong, Ren Changqing, Gao Changde, Zhuang Nianzeng, Yang Zhidong. This standard is interpreted by the Specialized Police Equipment Standardization Technical Committee of the Ministry of Public Security. Police cut-proof gloves

1 Scope

This standard specifies the requirements, test methods, inspection rules and signs, packaging, transportation and storage of police cut-proof gloves. This standard applies to the production, inspection, acceptance and ordering of police cut-proof gloves.

2 Terms and definitions

The following terms and definitions apply to this standard. 2.1 A glove or glove type that is effective against a wide range of cutting and strokes. 2.2 When various tools attack the human body, it can effectively reduce various types of structures of the wrist, palm, fingers, back of the hand, and scratches. Assembly.

3 requirements

3.1 General requirements 3.1.1 The wrists, palms, backs and fingers of the police anti-cutting gloves are all within the coverage of the cut-proof layer, and the materials should be consistent, and Non-toxic. 3.1.2 Wearability. The police anti-cutting gloves should be easy to wear, take off, breathable, feel good, feel good, and do not affect joint bending. 3.1.3 Product identification. Each police anti-cutting glove should have a clear manufacturer name or trademark, specification, production number or production date. 3.2 Appearance requirements The surface of the police anti-cutting gloves should be flat, with defects such as wireless head, breakage, notch, open wire, missing needle and stain. 3.3 Specifications The size of the police cut-proof gloves consists of two sizes, the total length L and the palm width W (the width of the tiger's mouth at a distance of 20 mm from the finger), see Figure 1. There are four types of models, namely S, M, L and XL, and the dimensions should meet the requirements of Table 1. The unit is mm Figure 1 Location map ...