HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (25 Oct 2025)

YY/T 1747-2021 English PDF

US$539.00 ยท In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
YY/T 1747-2021: Neurovascular implants. Intracranial artery stents
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
YY/T 1747-2021English539 Add to Cart 5 days [Need to translate] Neurovascular implants. Intracranial artery stents Valid YY/T 1747-2021

PDF similar to YY/T 1747-2021


Standard similar to YY/T 1747-2021

YY/T 1680   YY/T 1561   YY/T 1571   YY/T 1925   YY/T 1739   

Basic data

Standard ID YY/T 1747-2021 (YY/T1747-2021)
Description (Translated English) Neurovascular implants. Intracranial artery stents
Sector / Industry Medical Device & Pharmaceutical Industry Standard (Recommended)
Classification of Chinese Standard C45
Word Count Estimation 28,286
Issuing agency(ies) State Drug Administration

YY/T 1747-2021: Neurovascular implants. Intracranial artery stents

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Neurovascular implants:Intracranial artery stents ICS 11:040:40 C45 People's Republic of China Pharmaceutical Industry Standard Neurovascular Implants Intracranial Arterial Stents Published on 2021-12-06 2023-05-01 Implementation Released by the State Drug Administration directory Preface III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 General Requirements 2 5 Expected performance2 6 Design Properties 2 7 Material 3 8 Laboratory Design Evaluation 3 9 Post-market surveillance9 10 Manufacturing 9 11 Sterilization 9 12 pack of 10 Appendix A (Informative) Relationship between Design Attributes, Design Evaluation and Potential Failure Modes 12 Appendix B (Informative Appendix) Laboratory Analytical Testing 18 Reference 24

foreword

This standard was drafted in accordance with the rules given in GB/T 1:1-2009: Please note that some content of this document may be patented: The issuing authority of this document assumes no responsibility for identifying these patents: This standard is proposed by the State Drug Administration: This standard is approved by the National Technical Committee for Standardization of Surgical Implants and Orthopedic Devices Subcommittee on Cardiovascular Implants (SAC/ TC110/SC2) focal point: This standard was drafted by: MicroPort Shentong Medical Technology (Shanghai) Co:, Ltd:, Tianjin Medical Device Quality Supervision and Inspection Center, Ke Huiyi Therapeutic Equipment International Trade (Shanghai) Co:, Ltd: The main drafters of this standard: Tian Hao, Zhai Caihua, Li Yan, Jiao Yongzhe, Ma Jinzhu, Duan Qingjiao, Li Junwei, Zhang Quan, Li Ling: Neurovascular Implants Intracranial Arterial Stents

1 Scope

This standard specifies the general requirements, expected performance, design attributes, materials, laboratory design evaluation, post-market surveillance, Manufacturing, sterilization, packaging: This standard applies to stent products used in intracranial arteries for the treatment of bleeding or ischemic symptoms, including stents and supporting delivery devices: system: This standard does not include access devices (such as microcatheters) and other ancillary devices for stent delivery: This standard does not apply to intracranial aneurysm flow diversion devices: This standard does not cover bioabsorbable stents, polymer stents, stent coating degradation, and other aspects of time compliance: This standard does not cover procedures and instruments prior to stenting of intracranial arteries:

2 Normative references

The following documents are essential for the application of this document: For dated references, only the dated version applies to this article pieces: For undated references, the latest edition (including all amendments) applies to this document: GB/T 14233:1 Test methods for medical infusion, blood transfusion and injection equipment - Part 1: Chemical analysis methods GB/T 16886 (all parts) Biological evaluation of medical devices GB 18278:1 Moist heat for sterilization of healthcare products - Part 1: Development, validation and routine control of the sterilization process for medical devices Require GB 18279:1 Sterilization of Healthcare Products Ethylene Oxide Part 1: Development, Validation and Routine Control of Sterilization Processes for Medical Devices system requirements GB 18280:1 Sterilization Radiation for Healthcare Products Part 1: Development, Validation and Routine Control of Sterilization Processes for Medical Devices Require GB/T:19974 Characterization of sterilization factors for sterilization of health care products and development, validation and routine control of sterilization processes for medical devices general requirements YY 0285:1-2017 Intravascular catheters for single-use sterile catheters Part 1: General requirements YY/T 0316 Application of Medical Device Risk Management to Medical Devices YY/T 0640-2016 General requirements for passive surgical implants YY/T 0663:2-2016 Cardiovascular Implants and Endovascular Devices Part 2: Vascular Stents YY/T 0808 Standard Test Method for In Vitro Pulsation Durability of Vascular Stents

3 Terms and Definitions

The terms and definitions defined in YY/T 0640-2016 and YY/T 0663:2-2016 and the following terms and definitions apply to this document: 3:1 intracranial arterial stent Transluminal implants placed in intracranial vascular lesions to maintain or restore intracranial blood vessels by providing a mechanical support after implantation patency, or for the treatment of hemorrhagic lesions:

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of YY/T 1747-2021_English be delivered?

Answer: Upon your order, we will start to translate YY/T 1747-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of YY/T 1747-2021_English with my colleagues?

Answer: Yes. The purchased PDF of YY/T 1747-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.