HOME   Cart(1)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

YY/T 1689-2019 English PDF

US$94.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
YY/T 1689-2019: Dentistry - Designation system for dental implants
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
YY/T 1689-2019English94 Add to Cart 3 days [Need to translate] Dentistry - Designation system for dental implants Valid YY/T 1689-2019

PDF similar to YY/T 1689-2019


Standard similar to YY/T 1689-2019

YY/T 1692   YY/T 1702   YY/T 1691   YY/T 1684   

Basic data

Standard ID YY/T 1689-2019 (YY/T1689-2019)
Description (Translated English) Dentistry - Designation system for dental implants
Sector / Industry Medical Device & Pharmaceutical Industry Standard (Recommended)
Classification of Chinese Standard C33
Classification of International Standard 11.060.10
Word Count Estimation 5,571
Date of Issue 2019
Date of Implementation 2020-10-01
Issuing agency(ies) State Drug Administration
Summary This standard specifies a system for indicating the position of implant components in the jaw, and is to be used in conjunction with the system described in ISO 3950. This standard applies to indicating the position of the implant body in the jawbone. It does not by itself indicate whether the device is visible in the oral cavity, whether there is a transmucosal part or whether there is an implant restoration. Since this system describes the position rather than the form of restoration, the quadrant numbers 5-8 used in primary dentition are not used. This information should be recorded in the patient file by the appropriate clinician and provided to the patient by the clinician providing care.

YY/T 1689-2019: Dentistry - Designation system for dental implants

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Dentistry-Designation system for dental implants ICS 11.060.10 C33 People's Republic of China Pharmaceutical Industry Standard Dental implant labeling system (ISO 19429..2015, IDT) Published on October 23,.2019 2020-10-01 implementation Published by the State Drug Administration

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard uses the translation method equivalent to ISO 19429..2015 "Dental Dental Implant Marking System". The Chinese documents that have a consistent correspondence with the international documents referenced normatively in this standard are as follows. --- GB/T 9937 (all parts) Oral vocabulary [ISO 1942 (all parts)] --- GB/T 9938-2013 Dentistry Dental and Dental Areas (ISO 3950..2009) --- YY/T 1619-2018 Terminology of dental implant systems and related processes (ISO 16443..2014) Please note that some elements of this document may involve patents. The issuer of this document is not responsible for identifying these patents. This standard was proposed by the State Drug Administration. This standard is under the jurisdiction of the National Oral Materials and Devices Standardization Technical Committee (SAC/TC99). This standard was drafted. Dental Medical Device Inspection Center of Peking University School of Stomatology. The main drafters of this standard. Chai Yuan and Zhang Jin.

Introduction

Dental implant treatment has emerged as a feasible and extensive treatment technology, and has demanded its labeling system, which is used for Indicates the presence and location of such instruments in the jawbone, and the system is compatible with existing systems. Dental implants do not have the characteristics of individual teeth, It is obtained through its supporting restorations. Therefore, the implant body can be described as a location with an implied crown shape. Instead, specific teeth have a fixed shape and position. In both cases, this information can be supplemented in the form of additional notes. For treatment, trauma, or social reasons, various instruments can be implanted in or around the jaw, many of which are not internal bone teeth Implant. Given that these make up most of the implants in the oral and maxillofacial region, and the industry is in dire need of a marked implant And location standard methods, so a system has been established to meet this need. Since potential benefits are currently being obtained, Other types of implants and other methods of marking the location will complicate the system, but do not rule out the possibility of doing so in the future. Dental implant labeling system

1 Scope

This standard specifies a system to indicate the position of the implant body in the jawbone, and it is used with the system described in ISO 3950. This standard applies to indicating the position of the implant body in the jaw.It does not itself indicate whether the device is visible in the mouth, and whether there is a penetrating device. Part of the mucosa or whether there is an implant restoration. Because this system describes location rather than prosthetic form, it is not necessary to use it in deciduous teeth The number used to represent the quadrant is 5-8. This information should be recorded in the patient file by the appropriate clinician and provided to the patient by the clinician who provides care.

2 Normative references

The following documents are essential for the application of this document. For dated references, only the dated version applies to this article Pieces. For undated references, the latest version (including all amendments) applies to this document. GB/T 9937 (all parts) Dentistry terminology [ISO 1942 (all parts)] GB/T 9938 Method for the identification of dental position and oral area [dentistry of dental] [ISO 3950] YY/T 1619 Terms for dental implant systems and related processes (Dentistry-Vocabularyfordentalimplants systemsandrelatedprocedure)

3 terms and definitions

The terms and definitions defined in GB/T 9937 (all parts) and YY/T 1619 apply to this document. 4 Classification, labelling and coding This system uses three characters to indicate the position of each implant body. System. In all cases, the following sequence should be used. --- The first character. a number in the range of 1 ~ 4, which is used to indicate the upper right quadrant and upper left quadrant of the implant in the mouth, Lower left quadrant or lower right quadrant. Note. Because this system describes the position rather than the restoration form, it is not necessary to use the numbers 5 ~ 8 to represent the quadrants used in deciduous teeth. --- The second character is a number in the range of 1 ~ 8, which indicates the position of the implant body in the limited quadrant. The way the natural tooth position is marked is similar. --- The third character. the presence of the implant body with the character "", located at the position indicated by the first and second characters, and The teeth at this location correspond. There should be no spaces or punctuation between the characters, for example, 36 means that the dental implant body is located in the first molar area of the left lower jaw.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of YY/T 1689-2019_English be delivered?

Answer: Upon your order, we will start to translate YY/T 1689-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of YY/T 1689-2019_English with my colleagues?

Answer: Yes. The purchased PDF of YY/T 1689-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.