|
US$159.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
YY/T 1487.1-2016: Dentistry--Dental rubber dam technique--Part 1: Hole punch
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| YY/T 1487.1-2016 | English | 159 |
Add to Cart
|
3 days [Need to translate]
|
Dentistry--Dental rubber dam technique--Part 1: Hole punch
| Valid |
YY/T 1487.1-2016
|
PDF similar to YY/T 1487.1-2016
Basic data | Standard ID | YY/T 1487.1-2016 (YY/T1487.1-2016) | | Description (Translated English) | Dentistry--Dental rubber dam technique--Part 1: Hole punch | | Sector / Industry | Medical Device & Pharmaceutical Industry Standard (Recommended) | | Classification of Chinese Standard | C33 | | Word Count Estimation | 8,865 | | Date of Issue | 2016-07-29 | | Date of Implementation | 2017-06-01 | | Regulation (derived from) | State Food and Drug Administration Notice 2016 (No.129) | | Issuing agency(ies) | State Food and Drug Administration | YY/T 1487.1-2016: Dentistry--Dental rubber dam technique--Part 1: Hole punch---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Dentistry - Dental rubber dam technique - Part 1. Hole punch
ICS 11.060.20
C33
People's Republic of China Pharmaceutical Industry Standard
Dental Dental Rubber Barrier Technology
Part 1. Punching device
(ISO 16635-1..2013, MOD)
2016-07-29 released
2017-06-01 implementation
State Food and Drug Administration issued
Directory
Preface III
Introduction IV
1 Scope 1
2 normative reference document 1
3 Terms and definitions 1
4 requirements 2
5 Test method 4
6 mark 4
Foreword
YY/T 1487 "dental dental rubber barrier technology" is divided into two parts.
- Part 1. Punchers;
Part 2. Clamps.
This part is part 1 of YY/T 1487.
This part is drafted in accordance with the rules given in GB/T 1.1-2009.
This section uses the re-drafting method to modify the use of ISO 16635-1..2013 Dental Dental Rubber Barrier Process Part 1. Punching
The main differences between this section and ISO 16635-1..2013 are as follows.
--- According to China's market demand and industry status, using the national standard "GB/T 20878-2007 stainless steel and heat-resistant steel grades and
Composition "to replace the international standard" ISO 15510 stainless steel - chemical composition ";
--- in the "4.4 template features" under the 5-hole template to increase the relevant requirements;
--- in accordance with GB/T 1.1-2009 some of the arrangement format has been modified;
- For international standards cited in this section, if converted to our standard, this section will replace the international standard number referenced
The corresponding country or industry standard number, and indicate the use of the relationship in Chapter 2 of this section.
Please note that some of the contents of this document may involve patents. The issuer of this document does not assume responsibility for the identification of these patents.
This section is proposed by the State Food and Drug Administration.
This part of the National Dental Material and Equipment Standardization Technical Committee of Dental Equipment and Instruments Subcommittee (SAC/TC99
SC1).
This part of the drafting unit. the State Food and Drug Administration Guangzhou Medical Device Quality Supervision and Inspection Center, Guilin woodpecker medical equipment
Limited company.
This part of the main drafters. Wu Yiming, Zhou Liangbin, Du Xiao Shu, Liu Sisheng.
Introduction
In order to promote the application of dental rubber barriers, the standardization of the required tools and materials is necessary.
In dental practice, the punters are not in contact with the patient in the intended use of the intended use.
Dental Dental Rubber Barrier Technology
Part 1. Punching device
1 Scope
This part of YY/T 1487 specifies the requirements and test methods for dental rubber barrier punters.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 230.1 Metallic materials - Rockwell hardness test - Part 1. Test methods (A, B, C, D, E, F, G, H, K, N, T)
(GB/T 230.1-2009, ISO 6508-1..2005, MOD)
GB/T 4340.1 Metallic materials - Vickers hardness test - Part 1. Test methods (GB/T 4340.1-2009, ISO 6507-1.
2006, MOD)
GB/T 9937 (all parts) Oral vocabulary [ISO 1942 (all parts)]
Stainless steel and heat - resistant steel grades and their chemical composition GB/T
3 terms and definitions
GB/T 9937 (all parts) as defined and the following terms and definitions apply to this document.
3.1
Dental rubber barrier dentalrubberdam
Dental barrier
Rubber barrier rubber
A sheet of elastic material used to isolate one or more teeth from the rest of the mouth.
3.2
Dental Rubber Clamps dentalrubberdamclamp
Suitable for all kinds of tooth-shaped fixtures, usually made of spring steel, by two can closely fit the contours of the teeth and a jaw or
Two connecting jaws of the arch composition.
Note. Typically, each jaw has a hole that can be clamped and secured by a clamp.
3.3
Clamp clampforceps
The pliers used to install and remove the dental rubber barrier.
Note. When used, the clamp clamps the rubber barrier by inserting the two retaining pins into the holes of the jaws; then the rubber barrier is distracted and mounted on the teeth
position.
3.4
Punch holepunch
For pliers with different diameter holes in the dental rubber barrier.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of YY/T 1487.1-2016_English be delivered?Answer: Upon your order, we will start to translate YY/T 1487.1-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of YY/T 1487.1-2016_English with my colleagues?Answer: Yes. The purchased PDF of YY/T 1487.1-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|