|
US$724.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
YY/T 0628-2020: Dentistry - Graphical symbols for dental equipment
Status: Valid YY/T 0628: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| YY/T 0628-2020 | English | 724 |
Add to Cart
|
4 days [Need to translate]
|
Dentistry - Graphical symbols for dental equipment
| Valid |
YY/T 0628-2020
|
| YY/T 0628-2008 | English | 634 |
Add to Cart
|
3 days [Need to translate]
|
Dental equipment. Graphical symbols
| Obsolete |
YY/T 0628-2008
|
PDF similar to YY/T 0628-2020
Basic data | Standard ID | YY/T 0628-2020 (YY/T0628-2020) | | Description (Translated English) | Dentistry - Graphical symbols for dental equipment | | Sector / Industry | Medical Device & Pharmaceutical Industry Standard (Recommended) | | Classification of Chinese Standard | C33 | | Classification of International Standard | 11.060.20, 01.080.20 | | Word Count Estimation | 38,363 | | Date of Issue | 2020-06-30 | | Date of Implementation | 2021-06-01 | | Issuing agency(ies) | State Drug Administration | YY/T 0628-2020: Dentistry - Graphical symbols for dental equipment---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Dentistry - Graphical symbols for dental equipment
ICS 11.060.20,01.080.20
C33
People's Republic of China Pharmaceutical Industry Standard
Replace YY/T 0628-2008
Dentistry dental equipment graphic symbols
2020-06-30 released
2021-06-01 implementation
Issued by the State Drug Administration
Table of contents
Preface Ⅲ
Introduction Ⅳ
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 Requirements 1
5 Graphic symbols 2
References 32
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces YY/T 0628-2008 "Dental Equipment Graphic Symbols", compared with YY/T 0628-2008, except for editorial changes
The main technical changes are as follows.
---Increase the ISO /IEC registration number (see Table 1~Table 4);
--- Added symbols for cleaning, disinfection and sterilization (see Table 2);
--- Added the symbol of disinfectant for sanitary purposes (see Table 3);
---Added other common symbols (see Table 4).
The translation method used in this standard is equivalent to ISO 9687.2015 Graphical Symbols for Dental Equipment in Dentistry and the one issued in March.2018
Amendment No. 1.The newly added symbols in the.2018 amendment sheet have been marked with a vertical double line (‖) on the outer margins.
The Chinese documents that have consistent correspondence with the normatively cited international documents in this standard are as follows.
---GB/T 4880.1-2005 Language Name Code Part 1.2-letter code (ISO 639-1.2002, MOD)
---GB/T 7408-2005 Data element and exchange format information exchange date and time representation (ISO 8601.2000, IDT)
---GB/T 9937 (all parts) oral vocabulary [ISO 1942 (all parts)]
Please note that certain contents of this document may involve patents. The issuing agency of this document is not responsible for identifying these patents.
This standard was proposed by the State Drug Administration.
This standard is under the jurisdiction of the National Dental Materials and Equipment Standardization Technical Committee Dental Equipment and Equipment Subcommittee (SAC/TC99 SC1).
Drafting organizations of this standard. Guangdong Medical Device Quality Supervision and Inspection Institute, Sino Medical Device Group Co., Ltd., Foshan Shengtian Medical
Equipment Co., Ltd., Shandong Xinhua Medical Equipment Co., Ltd.
The main drafters of this standard. Wu Weirong, Huang Yuzhe, Zhang Yang, Wu Yiming, Zhao Lijun, Lai Huanggui, Liu Xiaolin.
The previous versions of the standard replaced by this standard are as follows.
---YY/T 0628-2008.
Introduction
Graphic symbols are used in many fields in daily life. They give necessary and useful information in a variety of visible ways. they
As a signal (warning or alarm signal) to provide general information, as a control method to provide the correct application of machines, instruments and other forms of communication.
Graphic symbols are internationally used, eliminating the difficulty of understanding, possible misunderstandings and expensive translation.
SAC/TC221 medical device quality management and related aspects, the standardization technical committee is responsible for the formulation of YY/T 0466.
This standard gives a simplified mark to avoid separate formation of other symbols that may convey the same information.
This standard contains a series of symbols (graphics) used in dentistry, and their application should be regarded as used in dental equipment and dental equipment.
The culture of device marking and packaging. Their use is limited to dentistry and as a very effective means of communication.
Dentistry dental equipment graphic symbols
1 Scope
This standard specifies the graphic symbols for dental equipment. These symbols are intended to be used in appropriate parts of dental equipment and accompanying documents for dental equipment
Documents, such as instructions for use, markings, labels and product technical documents.
This standard applies to all types of dental equipment. Most of the symbols are taken from relevant ISO, IEC or other international documents, also added
Some new symbols provided by manufacturers or users have been added.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
YY/T 0466.1-2016 Medical devices used for medical device labeling, marking and information symbols Part 1.General requirements (ISO 15223-1.2012, IDT)
ISO 639-1 Language Name Code Part 1.2-letter code
ISO 1942 Dentistry-Vocabulary
ISO 8601 data element and exchange format information exchange date and time representation
ISO 17724 Graphical Symbol Vocabulary
3 Terms and definitions
The following terms and definitions defined in YY/T 0466.1-2016, ISO 1942 and ISO 17724 apply to this document.
4 requirements
4.1 General requirements
Graphical symbols are used to convey the information given in Chapter 5.
For users of this standard, in order to classify all symbols used for dental products in one standard, some are in other international/national
The symbols defined in the standard provide information while also attaching corresponding international standards/national standards.
4.2 Use of graphic symbols
These graphic symbols are intended to be used in place of text, such as the use of symbols that appear in the following table on dental equipment and accessory labels
Determined by the manufacturer. These symbols can be used on the labels of dental equipment and accessory packaging, on the manufacturer’s instructions for use and other similar purposes.
Catalogs and brochures. The use of these symbols may not be accompanied by text to further explain the symbols.
4.3 Symbol size
Under normal vision under 215lx illumination and a certain distance without magnification, all graphic symbols and auxiliary information should be clear
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of YY/T 0628-2020_English be delivered?Answer: Upon your order, we will start to translate YY/T 0628-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of YY/T 0628-2020_English with my colleagues?Answer: Yes. The purchased PDF of YY/T 0628-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version YY/T 0628-2020?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YY/T 0628-2020 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|