HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

YY/T 0157-2013 English PDF

US$439.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
YY/T 0157-2013: Spring type release on pressure steam sterilizer
Status: Obsolete

YY/T 0157: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
YY/T 0157-2013English439 Add to Cart 3 days [Need to translate] Spring type release on pressure steam sterilizer Obsolete YY/T 0157-2013
YY/T 0157-2005English279 Add to Cart 3 days [Need to translate] Spring type release on pressure steam sterilizer Obsolete YY/T 0157-2005
YY/T 0157-1994English199 Add to Cart 2 days [Need to translate] (Pressure steam sterilization equipment put steam valve spring) Obsolete YY/T 0157-1994

PDF similar to YY/T 0157-2013


Standard similar to YY/T 0157-2013

YY/T 0802.1   YY/T 1268   YY 1277   YY/T 0802.2   

Basic data

Standard ID YY/T 0157-2013 (YY/T0157-2013)
Description (Translated English) Spring type release on pressure steam sterilizer
Sector / Industry Medical Device & Pharmaceutical Industry Standard (Recommended)
Classification of Chinese Standard C47
Classification of International Standard 11.080.99
Word Count Estimation 11,143
Older Standard (superseded by this standard) YY/T 0157-2005
Quoted Standard GB/T 9969
Regulation (derived from) State Food and Drug Administration Notice No. 36 of 2013; industry standard for filing Notice 2013 No. 12 (No. 168 overall)
Issuing agency(ies) State Food and Drug Administration
Summary This standard specifies: pressure steam sterilization equipment put to use spring steam valve classification and marking requirements, test methods, inspection rules, marking and instruction manual and packaging, transportation and storage. This standard

YY/T 0157-2013: Spring type release on pressure steam sterilizer

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Spring type release on pressure steam sterilizer ICS 11.080.99 C47 People's Republic of China pharmaceutical industry standards Replacing YY/T 0157-2005 Pressure steam sterilization equipment off steam valve spring Issued on. 2013-10-21 2014-10-01 implementation China Food and Drug Administration released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. Instead of the standard YY/T 0157-2005 "put pressure steam sterilization equipment steam valve spring." This standard compared with the original standard YY/T 0157-2005, the main changes are as follows. --- The standard name was changed to "put pressure steam sterilization equipment steam valve spring"; --- Original standard Chapter 1 "Scope" was amended; --- To Chapter 3, "Classification and flag" was amended to increase the "blowing off steam valve structure can be divided into two kinds of manual and automatic Types of"; --- Original standard Chapters 4 and 5 of chapter "Requirements" and "test method" was revised to delete the original standard of 4.5, for automatic release Steam valve to add the following technical requirements. a) put the steam valve set pressure deviation shall not exceed ± 3% of the set pressure; b) discharge steam valve discharge pressure should not exceed 1.03 times the set pressure. This standard was proposed by the China Food and Drug Administration. This standard by the National Standardization Technical Committee disinfection technology and equipment (SAC/TC200) centralized. This standard was drafted. State Food and Drug Administration Guangzhou Medical Device Quality Supervision and Inspection Center, Zhangjiagang Hualing Medical Equipment Manufacturing Co., Ltd., Ningbo, Ningbo Medical Devices Co., Ltd. The main drafters of this standard. Xu Honglei, Huang Xiulian, which Ao Wang, Zhang Mingzhao. This standard by the National Standardization Technical Committee disinfection technology and equipment responsible for the interpretation. This standard replaces the standards previously issued as follows. --- YY/T 0157-1994, YY/T 0157-2005. Pressure steam sterilization equipment off steam valve spring

1 Scope

This standard specifies the classification put pressure steam sterilization equipment and mark with a steam valve spring, requirements, test methods, inspection rules, marking and Instructions and packaging, transportation and storage. This standard applies to the set pressure is less than 0.4MPa, nominal diameter greater than or equal to 8mm pressure steam sterilization equipment spring Type steam release valve (hereinafter referred to as "steam release valve"), the discharge valve for steam design pressure is less than 0.4MPa, the sterilization temperature range of 115 ℃ ~ 150 ℃ Steam sterilization equipment for use within.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 9969 General Instructions industrial products

3 Categories and tags

3.1 Classification Steam valve release form of the structure can be divided into two kinds of manual and automatic types, see Appendix A. NOTE. each type of structure is not unique, just to achieve the same result, but also use other forms of construction. 3.2 mark Steam release valve model marked as follows. Common Medical device class Steam release valve 1 · Spring structure Working pressure/MPa Nominal diameter/mm Example. TYF1 · 0.25/8, showing the medical device class universal spring release steam valve, the working pressure of 0.25MPa, nominal diameter of 8mm. 3.3 release steam valve main parts of the material and the number given in Appendix B.

4 Requirements

4.1 General Discharge steam valve shall comply with the requirements of this standard, drawings and documents in accordance with regulations approved by the manufacturing process.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of YY/T 0157-2013_English be delivered?

Answer: Upon your order, we will start to translate YY/T 0157-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of YY/T 0157-2013_English with my colleagues?

Answer: Yes. The purchased PDF of YY/T 0157-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version YY/T 0157-2013?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YY/T 0157-2013 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.