|
US$189.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
YS/T 966-2014: Electrical calcined anthracite for cathode blocks
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| YS/T 966-2014 | English | 189 |
Add to Cart
|
3 days [Need to translate]
|
Electrical calcined anthracite for cathode blocks
| Valid |
YS/T 966-2014
|
PDF similar to YS/T 966-2014
Basic data | Standard ID | YS/T 966-2014 (YS/T966-2014) | | Description (Translated English) | Electrical calcined anthracite for cathode blocks | | Sector / Industry | Nonferrous Metallurgy Industry Standard (Recommended) | | Classification of Chinese Standard | Q52 | | Classification of International Standard | 71.100.10 | | Word Count Estimation | 7,780 | | Date of Issue | 10/14/2014 | | Date of Implementation | 4/1/2015 | | Quoted Standard | GB/T 8170; GB/T 8719; GB/T 24203; YS/T 63.19; YS/T 035 | | Regulation (derived from) | People's Republic of China Ministry of Industry and Information Technology Notice 2014 No. 63; Industry Standard Filing Notice 2014 No. 12 (Overall No. 180) | | Issuing agency(ies) | Ministry of Industry and Information Technology | | Summary | This Standard specifies the requirements for electrical forge anthracite production, test methods, inspection rules, packaging, labeling, transportation and storage, quality certificates and orders (or contract) content. This Standard applies to the produ | YS/T 966-2014: Electrical calcined anthracite for cathode blocks---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Electrical calcined anthracite for cathode blocks
ICS 71.100.10
Q52
People's Republic of China Nonferrous Metals Industry Standard
Electricity anthracite cathode blocks
Issued on. 2014-10-14
2015-04-01 implementation
Ministry of Industry and Information Technology of the People's Republic of China released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard by the national non-ferrous metals Standardization Technical Committee (SAC/TC243) centralized.
This standard is drafted by. Ningxia Ning flat carbon limited liability company, China Power Investment Ningxia Qingtongxia Energy Aluminium Group Limited.
It participated in the drafting of this standard. Fangyuan Group Co., Ltd. Lushan new lining material.
The main drafters of this standard. Liu Zhen, Cao Peifeng, by saying, ZHANG Yong-bin, Li Jiaying, Yang Zhidong, Peirui Jie, Wang column, Liu Jianping, Lu Junyi,
Xu Xinning, leaf music, Lee red, Li Wei.
Electricity anthracite cathode blocks
1 Scope
This standard specifies the calcined anthracite electric furnace production requirements, test methods, inspection rules, packaging, labeling, transportation and storage, quality certificate
Book and purchase order (or contract) content.
This standard applies to the production of raw material for aluminum cathode blocks electrically calcined anthracite.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 8170 repair value expressed about the rules and limit values and judgment
GB/T 8719 carbonaceous material and products packaging, marking, storage, transport and quality certificates of general provisions
GB/T 24203 Carbon material true density, true porosity method for determination of the boiling method
YS Carbonaceous material used in Part 19/T 63.19 Aluminum. Determination of ash content
YS/T 035 Determination of coke resistivity
3 Requirements
Grade 3.1
Electrically Calcined Anthracite ECA expressed in grades, ECA electrically calcined anthracite English name of each word in the acronym. Electrically calcined anthracite
Press physical and chemical properties are divided into two grades. ECA1, ECA2.
3.2 Physical and Chemical Properties
Electrically calcined anthracite ash powder resistivity, true density and other properties should meet the requirements of Table 1.
Table 1
Trademark
Physical and chemical properties
Ash /% Powder Resistivity/(μΩ · m) True Density/(g/cm3)
ECA1 ≤7 450 ~ 600 ≥1.84
ECA2 ≤7 > 600 ~ 750 ≥1.80
3.3 appearance quality
There should be no debris, the amount of powder is determined by agreement between the inner electrical anthracite.
3.4 Other Requirements
There are special technical requirements, be resolved through consultation by both parties, and indicate in the order (or contract) in.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of YS/T 966-2014_English be delivered?Answer: Upon your order, we will start to translate YS/T 966-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of YS/T 966-2014_English with my colleagues?Answer: Yes. The purchased PDF of YS/T 966-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|