YS/T 930: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| YS/T 930-2024 | English | RFQ |
ASK
|
3 days [Need to translate]
|
(Tetraamminepalladium dichloride)
| Valid |
YS/T 930-2024
|
| YS/T 930-2013 | English | 239 |
Add to Cart
|
3 days [Need to translate]
|
Tetraammine dichloropalladium(Ⅱ)
| Obsolete |
YS/T 930-2013
|
Basic data | Standard ID | YS/T 930-2024 (YS/T930-2024) | | Description (Translated English) | (Tetraamminepalladium dichloride) | | Sector / Industry | Nonferrous Metallurgy Industry Standard (Recommended) | | Classification of Chinese Standard | H68 | | Classification of International Standard | 77.150.99 | | Date of Issue | 2024-10-24 | | Date of Implementation | 2025-05-01 | | Older Standard (superseded by this standard) | YS/T 930-2013 | | Issuing agency(ies) | Ministry of Industry and Information Technology | | Summary | This standard specifies the marking, technical requirements, test methods, inspection rules, marking, packaging, transportation, storage, accompanying documents and order contents of dichlorotetraamminepalladium. This standard applies to dichlorotetraamminepalladium used in fine chemicals and electroplating industries. | YS/T 930-2013: Tetraammine dichloropalladium(Ⅱ)---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Tetraammine dichloropalladium (Ⅱ)
ICS 77.150.99
H68
People's Republic of China Nonferrous Metals Industry Standard
Dichlorotetraammine palladium
Tetraamminedichloropaladium (Ⅱ)
Issued on. 2013-10-17
2014-03-01 implementation
Ministry of Industry and Information Technology of the People's Republic of China released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard by the national non-ferrous metals Standardization Technical Committee (SAC/TC243) centralized.
This standard was drafted. Your research Platinum Limited.
Drafters of this standard. Shen good question, Liu, Jinya Qiu, Chen Wen, Chao-able.
Dichlorotetraammine palladium
1 Scope
This standard specifies the dichlorotetraammine palladium requirements, test methods, inspection rules and signs, packaging, transportation, storage and quality certificate and Closing
Same (or orders) content.
This standard applies to dichlorotetraammine palladium plating and fine chemical industry with.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
23276 palladium compound palladium content analysis method of determination of GB/T-dimethyl glyoxal oxime precipitated EDTA complexometric titration
Emission spectroscopy YS/T 362 pure palladium impurity element
3 Requirements
3.1 dichlorotetraammine palladium formula
Pd (NH3) 4Cl2 · H2O.
3.2 Chemical composition
Dichloro palladium tetraamine chemical composition shall comply with the requirements in Table 1.
Table 1
Palladium (mass fraction) /%
Impurity elements (mass fraction) /% ≤
Ag Au Pt Rh Ir Pb Ni Cu Fe Cd Cr
39.5 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001
3.3 dissolution test
Dichlorotetraammine palladium should be completely dissolved in water.
3.4 appearance quality
Dichlorotetraammine palladium particles should be large colorless crystals, small particles slightly yellow.
Test Method 4
4.1 Determination of the palladium content
Determination of palladium according to the provisions of GB/T 23276 of.
|