|
US$349.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
YS/T 737-2010: Equipment for cutting in/out aluminium cells with full current
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| YS/T 737-2010 | English | 349 |
Add to Cart
|
3 days [Need to translate]
|
Equipment for cutting in/out aluminium cells with full current
| |
YS/T 737-2010
|
PDF similar to YS/T 737-2010
Basic data | Standard ID | YS/T 737-2010 (YS/T737-2010) | | Description (Translated English) | Equipment for cutting in/out aluminium cells with full current | | Sector / Industry | Nonferrous Metallurgy Industry Standard (Recommended) | | Classification of Chinese Standard | H90 | | Classification of International Standard | 77.180 | | Word Count Estimation | 10,178 | | Date of Issue | 2010-11-22 | | Date of Implementation | 2011-03-01 | | Quoted Standard | GB/T 985; GB 1497; GB/T 6388; GB/T 13306; GB/T 13384; GB 50054; JB/T 5000.10-1998 | | Regulation (derived from) | MIIT (2010) No. 126 | | Issuing agency(ies) | Ministry of Industry and Information Technology | | Summary | This standard specifies the aluminum cell series does not stop blackouts, grooving apparatus (hereinafter referred to as device) requirements, test methods and marking, packaging, transportation, storage and so on. This standard applies to aluminum cell series does not stop blackouts, slotted devices. | YS/T 737-2010: Equipment for cutting in/out aluminium cells with full current---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Equipment for cutting in/out aluminium cells with full current
ICS 77.180
H90
People's Republic of China Nonferrous Metals Industry Standard
Aluminum cell series does not stop power outages, slotting device
Issued on. 2010-11-22
2011-03-01 implementation
Ministry of Industry and Information Technology of the People's Republic of China released
Foreword
This standard by the national non-ferrous metals Standardization Technical Committee (SAC/TC243) centralized.
This standard is drafted by. Real Purcell Technology Co., Ltd. Zhengzhou, Henan Zhongfu Industry Co., Ltd.
Participated in the drafting of this standard. Sichuan Venus Aluminum Co., Ltd., Luoyang, Henan Hong Kong Longquan Aluminum Co., Ltd., Shandong Nanshan
Aluminum Corporation.
The main drafters of this standard. Liang Xuemin, flat road, Wang Shan, Xin Peng Hui, Liu Shi, Wang Shiming, Wang has come, Feng Bing, Liu Jing.
Aluminum cell series does not stop power outages, slotting device
1 Scope
This standard specifies the aluminum cell series does not stop power outages, requires the slotting device (hereinafter referred to as the device), test methods and marking, packaging, transport
Transport, storage and so on.
This standard applies to aluminum cell series without power stop slotted devices.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated edition applies to this article was
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 985 SMAW basic form and size
GB 1497 low-voltage electrical basic standards
GB/T 6388 transport package shipping mark
GB/T 13306 signs
GB/T 13384 mechanical and electrical products packaging General technical conditions
GB 50054 low voltage power distribution design specifications
JB/T 5000.10-1998 heavy machinery assembly general technical conditions
3 Terms and Definitions
The following terms and definitions apply to this standard.
3.1
Stop, slotting stoppingandstartingpots
It refers to the aluminum reduction cell stop groove and grooved. Stop refers to the current flowing through the groove of the aluminum reduction cell is short-circuited and a bypass bus stops, notching finger Aluminum
Solution tank is bypassed current flows through the cell and put into operation again.
3.2
Without power non-stoppingpower
Refers to the series of aluminum holding tank where the stop before the current grooving operations that do not need to stop, notching reduce the current series.
4 Requirements
4.1 Composition
Stop by the device without power, slotted switch (hereinafter referred to as switch) and electrical control parts. The structure shown in Figure 1.
4.2 Model Representation
Device model representation as follows.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of YS/T 737-2010_English be delivered?Answer: Upon your order, we will start to translate YS/T 737-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of YS/T 737-2010_English with my colleagues?Answer: Yes. The purchased PDF of YS/T 737-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|