|
US$179.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
YS/T 722-2009: Lithium feldspar
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| YS/T 722-2009 | English | 179 |
Add to Cart
|
3 days [Need to translate]
|
Lithium feldspar
| |
YS/T 722-2009
|
PDF similar to YS/T 722-2009
Basic data | Standard ID | YS/T 722-2009 (YS/T722-2009) | | Description (Translated English) | Lithium feldspar | | Sector / Industry | Nonferrous Metallurgy Industry Standard (Recommended) | | Classification of Chinese Standard | H64 | | Classification of International Standard | 77.150 | | Word Count Estimation | 5,598 | | Date of Issue | 2009-12-04 | | Date of Implementation | 2010-06-01 | | Quoted Standard | YS/T 509 | | Regulation (derived from) | MIIT [2009] No. 66 | | Issuing agency(ies) | Ministry of Industry and Information Technology | | Summary | This standard specifies: lithium feldspar requirements, test methods, inspection rules, marking, packaging, transportation, storage and purchase order (or contract) content. This standard applies to beneficiation get lithium feldspar. Products for glass, ceramic industrial use. | YS/T 722-2009: Lithium feldspar---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Lithium feldspar
ICS 77.150
H64
People's Republic of China Nonferrous Metals Industry Standard
Lithium feldspar
Posted 2009-12-04
2010-06-01 implementation
Ministry of Industry and Information Technology of the People's Republic of China released
Foreword
This standard by the National Standardization Technical Committee of non-ferrous metals and centralized.
This standard was drafted. Yichun Ta-Nb ore.
The main drafters of this standard. Jiang Xiaopeng, Peng Yonghua, THEORETICAL AND Guo Wenping.
Lithium feldspar
1 Scope
This standard specifies the requirements for lithium feldspar, test methods, inspection rules, marking, packaging, transportation, storage and purchase order (or contract) content.
This standard applies to lithium feldspar beneficiation obtained. Products for glass and ceramics industry.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
YS/T 509 (all parts), spodumene, lepidolite concentrates - Methods
3 Requirements
3.1 Categories
Product chemical composition is divided into primary, secondary and tertiary total of three grades.
3.2 Chemical composition
Chemical composition of each grade products should meet the requirements in Table 1.
Table 1 mass fraction /%
Grade Li2O, not less than K2O + Na2O, not less than Fe2O3, not greater than Al2O3, not less than
A 15.0 0.7 7.5 0.10
Two 0.5 6.5 0.12 14.5
Three 0.2 6.0 0.15 14.0
3.3 size
Product particle size of not more than 1mm.
3.4 appearance quality
Products shall not be mixed foreign inclusions.
Test Method 4
Analysis of the chemical composition of the product was 4.1 according to the provisions of YS/T 509's.
Check the size of 4.2 by sieving.
4.3 appearance quality product with a visual inspection.
5 Inspection Rules
5.1 inspection and acceptance
5.1.1 Products should be for the quality inspection department checks to ensure product quality in line with the provisions of this standard, and fill in the quality certificate.
5.1.2 demand-side response receive the product tested according to the standards, such as test results are not in conformity with the provisions of this standard, shall receive
Date of the product within one month for the lodge, by the supply and demand sides negotiated settlement. For arbitration, arbitration sampled by the supply and demand sides together at the demand side
get on.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of YS/T 722-2009_English be delivered?Answer: Upon your order, we will start to translate YS/T 722-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of YS/T 722-2009_English with my colleagues?Answer: Yes. The purchased PDF of YS/T 722-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|