|
US$169.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
YS/T 676-2008: Molybdenum-aluminium intermediated alloy
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| YS/T 676-2008 | English | 169 |
Add to Cart
|
3 days [Need to translate]
|
Molybdenum-aluminium intermediated alloy
| Valid |
YS/T 676-2008
|
PDF similar to YS/T 676-2008
Basic data | Standard ID | YS/T 676-2008 (YS/T676-2008) | | Description (Translated English) | Molybdenum-aluminium intermediated alloy | | Sector / Industry | Nonferrous Metallurgy Industry Standard (Recommended) | | Classification of Chinese Standard | H63 | | Classification of International Standard | 77.150.99 | | Word Count Estimation | 6,631 | | Date of Issue | 2008-03-12 | | Date of Implementation | 2008-09-01 | | Regulation (derived from) | NDRC Notice No. 25 of 2008 | | Issuing agency(ies) | National Development and Reform Commission | | Summary | This standard specifies the requirements molybdenum aluminum alloy, test methods, inspection rules and signs, packaging, transportation, storage and purchase order (or contract) content. This standard applies to the production of aluminum thermal reduction method, titanium aluminum alloy molybdenum added. | YS/T 676-2008: Molybdenum-aluminium intermediated alloy---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Molybdenum-aluminium intermediated alloy
ICS 77.150.99
H63
People's Republic of China Nonferrous Metals Industry Standard
Molybdenum aluminum master alloys
Posted 2008-03-12
2008-09-01 implementation
National Development and Reform Commission issued
Foreword
This standard by the National Standardization Technical Committee of non-ferrous metals and centralized.
This standard by the Baoji Titanium Group Ltd., Baoji Titanium Industry Co., Ltd., Baoji in special metal-limited liability company responsible for drafting.
The main drafters of this standard. Fengjun Ning, Li, Wang Yongmei, Yinshu Xia, Chang-Jian, Liu.
Molybdenum aluminum master alloys
1 Scope
This standard specifies requirements for aluminum master alloy of molybdenum, test methods, inspection rules and signs, packaging, transportation, storage and purchase order (or close
Same) content.
This standard applies to the production of aluminum thermal reduction method, add titanium master alloy molybdenum aluminum.
2 Requirements
2.1 Grades
Molybdenum intermediate aluminum alloy grades for Al-60Mo.
2.2 Chemical composition
Chemical composition of the product shall comply with the requirements in Table 1.
Table 1%
Principal Component (mass fraction) of impurity elements (mass fraction), not more than
Mo Al Fe Si C V O
60.0 ~ 67.0 margin 0.30 0.30 0.05 0.05 0.10
2.3 size
Product size should be less than 6.0mm. Each batch size allowing a small amount beyond the range of products, but their number should not exceed the weight of the batch
4.0%, a maximum particle size of not more than 10mm.
2.4 High-density inclusions
Products should be no high-density inclusions.
2.5 appearance quality
Product surface should be clean, not allowed to have visual evidence of loose material, an oxide film, slag and other inclusions.
Test Method 3
3.1 Analysis of the chemical composition of the product according to the current methodology for the party, and the arbitration analysis by both parties through consultation.
Measuring particle size measuring 3.2 product sieving method or with the corresponding precision.
High-density 3.3 product inclusions by X-ray inspection method.
3.4 appearance quality of the product by visual inspection.
4 test rules
4.1 inspection and acceptance
4.1.1 Products should be for the quality inspection department checks to ensure product quality and compliance with this standard purchase order (or contract) requirements, and
Fill in the quality certificate.
4.1.2 demand-side response received product reinspection according to the provisions of the standard. Reinspection results with this standard and purchase order (or contract) provisions
Does not match, the supplier shall be made in writing by both parties through consultation. Belonging appearance quality and size of the object shall be in receipt of the product
30 days from the date proposed; belong to other objections shall be the date of receipt of goods within three months. For arbitration, arbitration sampled by the supply and demand
The two sides jointly at the demand side.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of YS/T 676-2008_English be delivered?Answer: Upon your order, we will start to translate YS/T 676-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of YS/T 676-2008_English with my colleagues?Answer: Yes. The purchased PDF of YS/T 676-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|