|
US$189.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
YS/T 63.13-2016: Carbonaceous materials used in the production of aluminium—Part 13: Determination of elastic modulus
Status: Valid YS/T 63.13: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| YS/T 63.13-2016 | English | 189 |
Add to Cart
|
3 days [Need to translate]
|
Carbonaceous materials used in the production of aluminium—Part 13: Determination of elastic modulus
| Valid |
YS/T 63.13-2016
|
| YS/T 63.13-2006 | English | 239 |
Add to Cart
|
3 days [Need to translate]
|
Carbonaceous materials used in the production of aluminium-Part 13: Determination of youngmodulus-Statical modulus method
| Obsolete |
YS/T 63.13-2006
|
PDF similar to YS/T 63.13-2016
Basic data | Standard ID | YS/T 63.13-2016 (YS/T63.13-2016) | | Description (Translated English) | Carbonaceous materials used in the production of aluminium��Part 13: Determination of elastic modulus | | Sector / Industry | Nonferrous Metallurgy Industry Standard (Recommended) | | Classification of Chinese Standard | Q52 | | Classification of International Standard | 71.100.10 | | Word Count Estimation | 8,820 | | Date of Issue | 2016-04-05 | | Date of Implementation | 2016-09-01 | | Older Standard (superseded by this standard) | YS/T 63.13-2006 | | Regulation (derived from) | The Ministry of Industry and Notice No. 2016 in 2016; the industry standard for the record 2016 No. 6 | | Issuing agency(ies) | Ministry of Industry and Information Technology | | Summary | This standard specifies the method for determining the elastic modulus of cathode carbon blocks and prebaked anodes in the range of 10 ��C to 35 ��C. | YS/T 63.13-2016: Carbonaceous materials used in the production of aluminium—Part 13: Determination of elastic modulus
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Carbonaceous materials used in the production of aluminum-Part 13. Determination of elastic modulus
ICS 77.100.10
Q52
People's Republic of China non-ferrous metal industry standards
Replaced YS/T 63.13-2006
Aluminum carbon material testing methods
Part 13. Determination of elastic modulus
Carbonaceous material impervious production of aliuminium
Part 13.Determinationofelasticmodulus
2016-04-05 release
2016-09-01 implementation
Ministry of Industry and Information Technology of the People's Republic of China
Foreword
YS/T 63 "aluminum carbon material testing method" is divided into the following 27 sections.
--- Part 1. Cathode paste firing method, Determination of weight loss and determination of apparent density of green samples;
--- Part 2. Determination of room temperature resistivity of cathode carbon block and prebaked anode;
--- Part 3. Determination of thermal conductivity comparison method;
--- Part 4. Determination of thermal expansion coefficient;
--- Part 5. There is a determination of the bottom of the carbon expansion coefficient of carbon expansion;
--- Part 6. Determination of open porosity hydrostatic method;
--- Part 7. Determination of apparent density size method;
--- Part 8. Determination of density in xylene pyknometer method;
--- Part 9. Determination of true density Helium hydrometer method;
--- Part 10. Determination of air permeability;
--- Part 11. Determination of air reactivity quality loss method;
--- Part 12. Prebaked anode CO2 Reactivity Determination of mass loss method;
--- Part 13. Determination of elastic modulus;
--- Part 14. Determination of flexural strength three-point method;
--- Part 15. Determination of compressive strength;
--- Part 16. Determination of trace elements X-ray fluorescence spectrometry;
--- Part 17. Determination of volatiles;
--- Part 18. Determination of moisture content;
--- Part 19. Determination of ash content;
--- Part 20. Determination of sulfur content;
--- Part 21. Cathode paste baking expansion/contraction determination;
--- Part 22. Determination of the degree of baking equivalent temperature method;
--- Part 23. Determination of prebaked anode air reactivity; Thermogravimetric method;
--- Part 24. Prebaked anode CO2 reactivity Determination of thermal gravimetric method;
--- Part 25. There is a determination of the bottom of the carbon expansion coefficient of sodium;
--- Part 26. Determination of refractory material resistance to cryolite penetration;
--- Part 27 - Determination of prebaked anode fracture energy.
This part of YS/T 63 Part 13.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This Part replaces YS/T 63.13-2006 "Carbonaceous materials for aluminum - Part 13 Determination of elastic modulus," and
YS/T 63.13-2006 compared to the main changes are as follows.
--- Refer to ISO 18142.2014 "Aluminum Carbon Materials Prebaked Anode Resonance Method for Determination of Dynamic Modulus of Elasticity", Added Acoustic Resonance
Act as Method 2 (see Chapter 4).
This part of the National Non-ferrous Metals Standardization Technical Committee (SAC/TC243) and focal point.
This part of the main drafting unit. China Aluminum Zhengzhou Nonferrous Metal Research Institute Co., Ltd., non-ferrous metal technology and Economy Research Institute.
This section participates in the drafting unit. Aluminum Corporation of China Guizhou Branch, Jinan O-Carbon Co., Ltd., cable through the development of shares
Co., Ltd., Shandong Chenyang New Carbon Materials Co., Ltd., Zhengzhou Haoyu Carbon Materials Co., Ltd., Ningxia Ningping Carbon Co., Ltd.
Division, Shandong Yankuang Carbon Products Co., Ltd., Feicheng Changsheng Special Graphite Co., Ltd.
The main drafters of this section. Li Rongzhu, Zhang Shuchao, Li Xingang, Li Bo, Liu Ya Shan, Zhao Qingcai, He Shuming, Gao Shoulei, Yu Yi Ru,
Xi Zhao Yang, Liu Zhen, Cao Peifeng, Chen Xiaojun, Li Yunzhu.
This part replaces the standards previously issued.
--- YS/T 63.13-2006.
Aluminum carbon material testing methods
Part 13. Determination of elastic modulus
1 Scope
YS/T 63 provisions of this part of the cathode carbon block in the range of 10 ℃ ~ 35 ℃, pre-baked anode elastic modulus measurement method.
This section applies to the cathode in the range of 10 ℃ ~ 35 ℃, prebaked anode elastic modulus determination.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 8170 revised data and rules limit the value of the rules and judgments
GB/T 26297.1 Sampling methods for carbonaceous materials for aluminum - Part 1. Bottom carbon blocks
GB/T 26297.2 Sampling methods for carbonaceous materials for aluminum - Part 2. Side carbon blocks
Sampling methods for carbonaceous materials for aluminum - Part 3. Prebaked anodes
YS/T 63.7 Carbon materials for aluminum - Part 7. Determination of apparent density Size method
3 methods 1. Static method
3.1 Method summary
Young's modulus is a measure of the relationship between stress σ and deformation ε in a region of elastic deformation under the action of an external force. The value is
The ratio of σ to ε, denoted E.
3.2 Instruments
3.2.1 Test equipment refers to the device that can measure the stress and strain of materials, generally by the force equipment, dynamometer, measuring deformation instrument, data processing
(Such as computers, microprocessors, etc.). External force exerted by the force equipment in the sample, the use of dynamometer to measure external force, by measuring deformation instrument
The deformation of the sample is measured, measured by a data processor, collected, calculated and the test results are obtained. Incline equipment to be able to provide suitable
Static load external loading system (according to the maximum load to determine the appropriate range); Dynamometer can reflect the load on the sample value
Of the measuring and indication system (according to the final load to determine the maximum force scale); measuring deformation instrument can measure the sample within the elastic deformation of small deformation
Of the instrument (range and the final deformation to adapt to the measurement accuracy of 1μm).
3.2.2 length measuring equipment. Vernier caliper or micrometer, the accuracy of 0.02mm.
3.3 sample
3.3.1 The cathode carbon block and prebaked anode were sampled according to GB/T 26297.1, GB/T 26297.2 and GB/T 26297.3, respectively. Sample rule
Inch diameter 50mm ± 2mm, length 50mm ± 0.1mm, both ends of the vertical axis should be vertical.
3.3.2 The sample was dried at 120 ℃ ± 5 ℃ 12h, then cooled to room temperature.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of YS/T 63.13-2016_English be delivered?Answer: Upon your order, we will start to translate YS/T 63.13-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of YS/T 63.13-2016_English with my colleagues?Answer: Yes. The purchased PDF of YS/T 63.13-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version YS/T 63.13-2016?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YS/T 63.13-2016 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|