HOME Cart(0) Quotation About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

YS/T 568.7-2008 English PDF

US$169.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
YS/T 568.7-2008: Chemical analysis methods for zirconium oxide and hafnium oxide. Determination of phosphorus content. The reduced molybdoantimonylphosphate complex spectrophotometric method
Status: Valid

YS/T 568.7: Evolution and historical versions

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Status	PDF
YS/T 568.7-2008	English	169	Add to Cart	3 days [Need to translate]	Chemical analysis methods for zirconium oxide and hafnium oxide. Determination of phosphorus content. The reduced molybdoantimonylphosphate complex spectrophotometric method	Valid	YS/T 568.7-2008
YS/T 568.7-2006	English	199	Add to Cart	2 days [Need to translate]	(Zirconium, hafnium oxide determination of phosphorus content (antimony salt - ascorbic acid molybdenum blue photometric method))	Obsolete	YS/T 568.7-2006

PDF similar to YS/T 568.7-2008

Standard similar to YS/T 568.7-2008

YS/T 656 GB/T 4325.5 GB/T 3458 YS/T 568.13 YS/T 568.12 YS/T 568.10

Basic data

Standard ID	YS/T 568.7-2008 (YS/T568.7-2008)
Description (Translated English)	Chemical analysis methods for zirconium oxide and hafnium oxide. Determination of phosphorus content. The reduced molybdoantimonylphosphate complex spectrophotometric method
Sector / Industry	Nonferrous Metallurgy Industry Standard (Recommended)
Classification of Chinese Standard	H63
Classification of International Standard	77.120.99
Word Count Estimation	6,640
Date of Issue	2008-03-12
Date of Implementation	2008-09-01
Older Standard (superseded by this standard)	YS/T 568.7-2006
Regulation (derived from)	NDRC Notice No. 25 of 2008
Issuing agency(ies)	National Development and Reform Commission
Summary	This standard specifies the zirconium oxide and hafnium oxide Determination of phosphorus content. This standard applies to hafnium oxide, zirconium oxide and phosphorus content. Measuring range: 0. 005% ~ 0. 8%.

YS/T 568.7-2008: Chemical analysis methods for zirconium oxide and hafnium oxide. Determination of phosphorus content. The reduced molybdoantimonylphosphate complex spectrophotometric method

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Chemical analysis methods for zirconium oxide and hafnium oxide.Determination of phosphorus content.The reduced molybdoantimonylphosphate complex spectrophotometric method ICS 77.120.99 H63 People's Republic of China Nonferrous Metals Industry Standard Replacing YS/T 568.7-2006 Zirconium oxide, hafnium oxide chemical analysis Determination of phosphorus content Antimony salt - ascorbic acid - phosphorus molybdenum blue spectrophotometric method Posted 2008-03-12 2008-09-01 implementation National Development and Reform Commission issued

Foreword

YS/T 568 "zirconium, hafnium oxide chemical analysis method" is divided into 11 parts. --- Part 1. Determination of zirconium and hafnium oxide combined amount of mandelic acid gravimetric method; --- Part 2. Determination of iron content sulfonic acid spectrophotometry; --- Part 3. Determination of the amount of silicon silicon molybdenum blue spectrophotometric method; --- Part 4. Determination of aluminum content of chromium azure S- cylpyridinium chloride spectrophotometry; --- Part 5. Determination of sodium content by flame atomic absorption spectrometry; --- Part 6. Determination of the amount of titanium di Zhao DAM spectrophotometry; --- Part 7. Determination of phosphorus content of antimony salt - ascorbic acid - phosphorus molybdenum blue spectrophotometric method; --- Part 8. zirconia aluminum, calcium, magnesium, manganese, sodium, nickel, iron, titanium, zinc, molybdenum, vanadium, hafnium content - Inductively coupled plasma fat Emission spectrometry; --- Part 9. hafnium oxide of aluminum, calcium, magnesium, manganese, sodium, nickel, iron, titanium, zinc, molybdenum, vanadium, zirconium content - Inductively coupled plasma fat Emission spectrometry; --- Part 10. Determination of manganese content - Potassium periodate spectrophotometric method; --- Part 11. Determination of α- linked furoylhydrazone nickel dioxime spectrophotometric method. This is Part 7. The partial replacement of YS/T 568.7-2006 "zirconium oxide, hafnium determination of phosphorus content" (formerly GB/T 2590.7-1981). This portion of YS/T 568.7-2006 compared to the main changes are as follows. --- Added "7.1 repeatability" clause; --- Added "8 Quality assurance and control" clause. The non-ferrous metal part by the National Standardization Technical Committee and centralized. This part by the Beijing Nonferrous Metal Research Institute, China Nonferrous Metals Industry Institute of Standards Metrology and Quality is responsible for drafting. This section was drafted by the Beijing Nonferrous Metal Research Institute. The main drafters of this section. Tong Jian, Zhang Zhuo, Fan Ying, Wang Li set. This part of the standard replaces the previous editions are. --- GB/T 2590.7-1981, YS/T 568.7-2006. Zirconium oxide, hafnium oxide chemical analysis Determination of phosphorus content Antimony salt - ascorbic acid - phosphorus molybdenum blue spectrophotometric method

1 Scope

This section specifies the determination of zirconia and hafnia phosphorus content. This section applies to the determination of zirconium oxide, hafnium oxide and phosphorus content. Measurement range. 0.005% to 0.8%.

2 Method summary

Hydrofluoric acid in a high pressure sample Sample Dissolution apparatus was dissolved, was added boric acid in 0.2mol/L sulfuric acid solution, ammonium molybdate phosphorus, antimony Salt, ascorbic molybdenum blue at 700nm wavelength spectrophotometer measured absorbance. Zirconium matrix slightly lower so that the results in order to eliminate the impact shall be equal amounts of zirconium as a substrate to prepare a working curve. Hafnium matrix without interference. In fluoroborate and sodium thiosulfate under a blanket, a test solution containing respectively 1mg of aluminum, tin, vanadium, uranium, 2mg titanium, thorium, arsenic, germanium, chromium, 4mg 17mg of silicon and iron, do not interfere with the determination.

3 Reagents

3.1 boric acid, pure class distinctions. 3.2 hydrofluoric acid (ρ1.15g/mL), pure class distinctions. 3.3 ammonia water (1 + 1), pure class distinctions. 3.4 Mixed masking agent. 8g/L sodium thiosulfate solution and 80g/L sodium bisulfite solution was mixed in equal volumes. 3.5 mixed stain. (A) sulfuric acid (2.7mol/L), pure class distinctions. (B) ascorbic acid solution (30g/L), the time is now equipped with. (C) ammonium molybdate solution (50g/L). (D) antimony potassium tartrate solution. Weigh 0.2743g antimony potassium tartrate [KSbOC4H4O6] dissolved in water and diluted to 100mL, mix uniform. This solution 1mL 1mg containing antimony. Take 50mL (A) solution, 20mL (B) solution, 15mL (C) dilute solution, (D) a mixed solution 6mL, mixed with water to 100mL (When used with now). 3.6 Phosphorus standard stock solution. Weigh 0.4264g diammonium phosphate [(NH4) 2HPO4] was dissolved in water, the water moved 1000mL capacity Flask, and dilute to volume, shake. This solution 1mL containing 100μg phosphorus. 3.7 Phosphorus standard solution. Pipette 25.00mL phosphorus standard stock solution (3.6), placed in 250mL volumetric flask, dilute to the mark with water, shake uniform. This solution 1mL containing 10μg phosphorus.

4 Instrument

Spectrophotometers and high pressure sample dissolution apparatus. Step 5 Analysis 5.1 Sample Weigh 0.10g or 0.20g sample, accurate to 0.0001g.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of YS/T 568.7-2008_English be delivered?

Answer: Upon your order, we will start to translate YS/T 568.7-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of YS/T 568.7-2008_English with my colleagues?

Answer: Yes. The purchased PDF of YS/T 568.7-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version YS/T 568.7-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YS/T 568.7-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.