|
US$169.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
YS/T 568.4-2008: Chemical analysis methods for zirconium oxide and hafnium oxide. Determination of aluminium content. Chronic azurol-S-tetradrcylpyridine chloride spectrophotometric method
Status: Valid YS/T 568.4: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| YS/T 568.4-2008 | English | 169 |
Add to Cart
|
3 days [Need to translate]
|
Chemical analysis methods for zirconium oxide and hafnium oxide. Determination of aluminium content. Chronic azurol-S-tetradrcylpyridine chloride spectrophotometric method
| Valid |
YS/T 568.4-2008
|
| YS/T 568.4-2006 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
(Zirconium, hafnium aluminum oxide measured amount of (S- chloride Chromazurol cylpyridinium photometric method))
| Obsolete |
YS/T 568.4-2006
|
PDF similar to YS/T 568.4-2008
Basic data | Standard ID | YS/T 568.4-2008 (YS/T568.4-2008) | | Description (Translated English) | Chemical analysis methods for zirconium oxide and hafnium oxide. Determination of aluminium content. Chronic azurol-S-tetradrcylpyridine chloride spectrophotometric method | | Sector / Industry | Nonferrous Metallurgy Industry Standard (Recommended) | | Classification of Chinese Standard | H63 | | Classification of International Standard | 77.120.99 | | Word Count Estimation | 6,616 | | Date of Issue | 2008-03-12 | | Date of Implementation | 2008-09-01 | | Older Standard (superseded by this standard) | YS/T 568.4-2006 | | Regulation (derived from) | NDRC Notice No. 25 of 2008 | | Issuing agency(ies) | National Development and Reform Commission | | Summary | This standard specifies the hafnium oxide, zirconium oxide and aluminum content determination. This standard applies to hafnium oxide, zirconium oxide and aluminum content. Measuring range: 0. 005% to 0. 2%. | YS/T 568.4-2008: Chemical analysis methods for zirconium oxide and hafnium oxide. Determination of aluminium content. Chronic azurol-S-tetradrcylpyridine chloride spectrophotometric method
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Chemical analysis methods for zirconium oxide and hafnium oxide.Determination of aluminium content.Chronic azurol-S-tetradrcylpyridine chloride spectrophotometric method
ICS 77.120.99
H63
People's Republic of China Nonferrous Metals Industry Standard
Replacing YS/T 568.4-2006
Zirconium oxide, hafnium oxide chemical analysis
Determination of aluminum content
Chromazurol S- cylpyridinium chloride spectrophotometry
Posted 2008-03-12
2008-09-01 implementation
National Development and Reform Commission issued
Foreword
YS/T 568 "zirconium, hafnium oxide chemical analysis method" is divided into 11 parts.
--- Part 1. Determination of zirconium oxide and hafnium content of mandelic acid gravimetric method;
--- Part 2. Determination of iron content sulfonic acid spectrophotometry;
--- Part 3. Determination of silicon content - Molybdenum blue spectrophotometric method;
--- Part 4. Determination of aluminum content of chromium azure S- cylpyridinium chloride spectrophotometry;
--- Part 5. Determination of sodium content by flame atomic absorption spectrometry;
--- Part 6. Determination of the amount of titanium di Zhao DAM spectrophotometry;
--- Part 7. Determination of phosphorus content of antimony salt - ascorbic acid - phosphorus molybdenum blue spectrophotometric method;
--- Part 8. zirconia aluminum, calcium, magnesium, manganese, sodium, nickel, iron, titanium, zinc, molybdenum, vanadium, hafnium content - Inductively coupled plasma fat
Emission spectrometry;
--- Part 9. hafnium oxide of aluminum, calcium, magnesium, manganese, sodium, nickel, iron, titanium, zinc, molybdenum, vanadium, zirconium content - Inductively coupled plasma fat
Emission spectrometry;
--- Part 10. Determination of manganese content - Potassium periodate spectrophotometric method;
--- Part 11. Determination of α- linked furoylhydrazone nickel dioxime spectrophotometric method.
This is Part 4.
The partial replacement of YS/T 568.3-2006 "zirconium oxide, hafnium determination of aluminum content" (formerly GB/T 2590.10-1981).
This portion of YS/T 568.3-2006 compared to the main changes are as follows.
--- Added "7.1 repeatability" clause;
--- Added "8 Quality assurance and control" clause.
The non-ferrous metal part by the National Standardization Technical Committee and centralized.
This part by the Beijing Nonferrous Metal Research Institute, China Nonferrous Metals Industry Institute of Standards Metrology and Quality is responsible for drafting.
This section was drafted by the Beijing Nonferrous Metal Research Institute.
The main drafters of this section. Liu Ying, Lee Man Chi, Zang Muwen.
This part of the standard replaces the previous editions are.
--- GB/T 2590.4-1981, YS/T 568.3-2006.
Zirconium oxide, hafnium oxide chemical analysis
Determination of aluminum content
Chromazurol S- cylpyridinium chloride spectrophotometry
1 Scope
This section provides zirconium oxide and hafnium oxide determination of aluminum content.
This section applies to the determination of zirconium oxide, hafnium oxide and aluminum content. Measurement range. 0.005% to 0.2%.
2 Method summary
Sample with sulfuric acid, ammonium sulfate dissolved, N- -N- benzoyl phenylhydroxylamine chloroform solution was extracted separating body zirconium, hafnium and iron, titanium and other dry
Disturbing elements. After separation, the residual iron by phenanthroline morpholino, ascorbic acid masking. In pH5.8 acetic acid - sodium acetate medium, aluminum and CAS
S, cylpyridinium chloride to form a colored complex in a spectrophotometer at a wavelength of 630nm measured absorbance.
If the sample contains a small amount of uranium, thorium, sodium carbonate solution may be added to eliminate the influence upon color.
3 Reagents
3.1 ammonium sulfate, pure class distinctions.
3.2 sulfate (ρ1.84g/mL), pure class distinctions.
3.3 nitrate (ρ1.42g/mL), pure class distinctions.
3.4 chloroform.
3.5 hydrochloric acid (1 + 19).
Ammonia 3.6 (1 + 1).
3.7 Chromazurol S- cylpyridinium chloride solution. Weigh 0.3g Chromium Azure S and 2g cylpyridinium chloride were dissolved in a small amount
Water and then combined and diluted with water to 1000mL, and mix.
3.8 phenanthroline morpholino solution (10g/L).
3.9 ascorbic acid solution (10g/L). the time is now equipped with.
3.10 2,4-dinitrophenol solution (1g/L). Weigh 0.1g2,4- dinitrophenol dissolved in 100mL of ethanol.
3.11 acetic acid - sodium acetate buffer solution (pH5.8). Weigh 90.2g of anhydrous sodium acetate, dissolved in water, was added 6.0mL glacial acetic acid, washed with water
Moved into 1000mL volumetric flask, and dilute to the mark.
3.12 N- benzoyl phenylhydroxylamine -N- (BPHA) chloroform solution (25g/L). Weigh 10gBPHA, was dissolved in 400mL trichloroformate
Dioxane.
3.13 aluminum standard solution.
3.13.1 weighed 1.0000g of aluminum [(Al) > 99.9%], placed in a polyethylene beaker, add 20mL water, 3g of sodium hydroxide,
Wait until the complete dissolution with hydrochloric acid (ρ1.19) slowly neutralized to precipitate, and excess 20mL, stirring constantly to dissolve. Cooling water
Moved into 1000mL volumetric flask, and dilute to the mark. 1mL solution containing 1mg aluminum.
3.13.2 Pipette 25.00mL solution (3.13.1) into 250mL volumetric flask, was added 0.5mL, hydrochloric acid (ρ1.19g/mL), washed with water
Dilute to the mark. This solution 1mL containing 100μg aluminum.
3.13.3 Pipette 25.00mL solution (3.13.2), placed in 250mL volumetric flask, was added 0.5mL of hydrochloric acid (ρ1.19g/mL), washed with water
Dilute to the mark. This solution 1mL containing 10μg aluminum.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of YS/T 568.4-2008_English be delivered?Answer: Upon your order, we will start to translate YS/T 568.4-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of YS/T 568.4-2008_English with my colleagues?Answer: Yes. The purchased PDF of YS/T 568.4-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version YS/T 568.4-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YS/T 568.4-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|