US$229.00 ยท In stock Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. YS/T 1110-2024: (Continuous extrusion copper strip) Status: Valid YS/T 1110: Evolution and historical versions
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
YS/T 1110-2024 | English | 229 |
Add to Cart
|
3 days [Need to translate]
|
(Continuous extrusion copper strip)
| Valid |
YS/T 1110-2024
|
YS/T 1110-2016 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Copper strip stock by continuous extrusion
| Obsolete |
YS/T 1110-2016
|
Basic data Standard ID | YS/T 1110-2024 (YS/T1110-2024) | Description (Translated English) | (Continuous extrusion copper strip) | Sector / Industry | Nonferrous Metallurgy Industry Standard (Recommended) | Classification of Chinese Standard | H62 | Classification of International Standard | 77.150.30 | Word Count Estimation | 10,159 | Date of Issue | 2024-10-24 | Date of Implementation | 2025-05-01 | Older Standard (superseded by this standard) | YS/T 1110-2016 | Issuing agency(ies) | Ministry of Industry and Information Technology | Summary | This standard specifies the classification and marking, technical requirements, test methods, inspection rules, marking, packaging, transportation, storage, accompanying documents and order form contents of continuously extruded copper strip blanks. This standard applies to continuously extruded copper strip blanks that need to be subsequently processed into copper strips. |
YS/T 1110-2016: Copper strip stock by continuous extrusion---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Continuous extrusion of copper strip)
ICS 77.150.30
H62
People's Republic of China non-ferrous metal industry standards
Continuous extrusion of copper billet
2016-07-11 released
2017-01-01 implementation
Ministry of Industry and Information Technology of the People's Republic of China
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard is proposed and managed by the National Nonferrous Metal Standardization Technical Committee (SAC/TC243).
This standard was drafted unit. Shaoxing City Power Electric Co., Ltd., Foshan Huahong Copper Co., Ltd., Shandong auspicious Copper Co., Ltd.,
Silver Colored Group Co., Ltd., Shaoxing City, Quality and Technical Supervision Inspection Institute.
The main drafters of this standard. Xu Gaolei, Ren Jing, Peng Zi, Liu Hui, Jiang Jie, Lin Guoliang, Chen Jidong, Chen Yan, Liu Qingguo, Zhang Yong, Yang Guiping,
Cheng Lixin, Du Xiyong.
Continuous extrusion of copper billet
1 Scope
This standard specifies the requirements for continuous extrusion of copper strip, test methods, inspection rules, marking, packaging, transportation, storage, quality certificate and
Order (or contract) and so on.
This standard applies to the need for subsequent processing into a continuous copper strip with copper strip (hereinafter referred to as strip).
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 228.1-2010 Tensile testing of metallic materials - Part 1. Test methods
GB/T 231.1 Metallic Brinell hardness test - Part 1. Test methods
GB/T 351 metallic materials resistance coefficient measurement method
GB/T 5121 (all parts) - Methods for chemical analysis of copper and copper alloys
GB/T 5231 processing copper and copper alloy grades and chemical composition
GB/T 8888 non-ferrous metal processing products packaging, marking, transport, storage and quality certificate
GB/T 26303.3 copper and copper alloy processing materials Dimensions measurement method Part 3.
YS/T 478 copper and copper alloy conductivity eddy current test method
YS/T 668 copper and copper alloy physical and chemical detection sampling method
YS/T 815 copper and copper alloys Preparation of mechanical properties and process performance samples
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
Longitudinal thickness difference longitudinalthicknesstolerance
The maximum difference between any two point thicknesses measured over the same longitudinal length of the entire web.
3.2
Edge thickness edgethickness
Thickness measured at 30 mm from the side of the strip (see H1, H2 in Fig. 1).
Description.
H0 --- center point thickness;
H1, H2 --- the thickness of both sides.
Fig.1 Schematic diagram of measuring point of thickness on billet cross section
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of YS/T 1110-2024_English be delivered?Answer: Upon your order, we will start to translate YS/T 1110-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of YS/T 1110-2024_English with my colleagues?Answer: Yes. The purchased PDF of YS/T 1110-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version YS/T 1110-2024?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YS/T 1110-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|