YS/T 1045-2015 (YST1045-2015)

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Related Standard	Status	PDF
YS/T 1045-2015	English	489	Add to Cart	4 days [Need to translate]	Copper-steel composite sheet and strip for decoration	YS/T 1045-2015	Valid	YS/T 1045-2015

YS/T 1045-2015
(Decoration with copper - steel composite sheet and strip)
ICS 77.150.99
H62
People's Republic of China Nonferrous Metals Industry Standard
Decoration with copper - steel composite sheet and strip
Issued on. 2015-04-30
2015-10-01 implementation
Ministry of Industry and Information Technology of the People's Republic of China released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard by the national non-ferrous metals Standardization Technical Committee (SAC/TC243) and focal points.
This standard was drafted. Copperbelt Limited Ningbo-energy complex, Cu, Pb and Anhui Country Products Quality Supervision and Inspection Center, non-ferrous metals
A technical Economic Research Institute, Ltd. Zhejiang Jiang Zhaolong alloy.
The main drafters of this standard. Hon-Man Chan, Sun Wei, Chen Xiuqin, Li Fang, Mao Chaojie, Hegang Jian, according to Chung-wing, if the Sun, Liang country, Wuchun Fang.
Decoration with copper - steel composite sheet and strip
1 Scope
This standard specifies the decoration with copper - steel composite sheet and strip requirements, test methods, inspection rules, marking, packaging, transportation, storage,
Quality certificate and purchase order (or contract) and so on.
This standard applies to the roof, siding, flashing, drainage groove boards, windows, doors, curtain wall components, and other structures, as well as hardware, lighting,
Jewelry, medal, moldings and other decorative glass decorative copper - steel composite sheet and strip. Referring to other similar occasions may be used.
2 Normative references
The following documents for the application of this standard is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 223 (all parts), steel and alloy chemical analysis method
Part 1 Test room Test methods GB/T 228.1-2010 metal material tensile
GB/T 232 metallic materials - Bend test
GB/T 235 Metallic materials - Sheet and strip repeated bending test method
GB/T 700 carbon structural steel
GB/T 5121 (all parts) of copper and copper alloys -
GB/T 5231 and processing of copper and copper alloy grades and chemical composition
GB/T 6394 Determination of average grain size of metal
GB/T 8888 heavy non-ferrous metal processing products, packaging, labeling, transportation, storage and quality certificate
GB/T 26303.3 copper and copper alloy processing material Dimensions detection methods - Part 3. plate and strip
YS/T 482 copper and copper alloy analysis photoemission spectroscopy
YS/T 483 copper and copper alloy analysis X-ray fluorescence spectrometry (wavelength dispersion)
YS/T 668 copper and copper alloy physical and chemical detection sampling method
YS/T 815 methods for preparing copper and copper alloy mechanical and technological properties of the sample
3 Terms
Definitions The following terms apply to this standard.
3.1
Copper - steel composite sheet and strip copper-steelcompositesheetandstrip
In carbon steel substrate, using the rolling method or other method, in which one or both sides continuously whole complex a certain thickness of the copper and copper alloy
Material, hereinafter referred to as CSC strip.
3.2
Base metal basemetal
Metal coated adhesive coating layer, the proportion of more carbon steel part, referred to as the substrate.
3.3
Cladding metal claddingmetal
Copper and copper alloy portion of the composite strip, referred to as cladding.