YS/T 1016-2014 (YST 1016-2014)

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Related Standard	Status	PDF
YS/T 1016-2014	English	399	Add to Cart	3 days	Safety specification for aluminium and aluminium alloy drawing stocks and wires	YS/T 1016-2014	Valid	YS/T 1016-2014

YS/T 1016-2014
Safety specification for aluminium and aluminium alloy drawing stocks and wires
ICS 13.100
H09
People's Republic of China Nonferrous Metals Industry Standard
Aluminum and aluminum alloy wire rod and wire production safety norms
Issued on. 2014-07-09
2014-11-01 implementation
Ministry of Industry and Information Technology of the People's Republic of China released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard by the national non-ferrous metals Standardization Technical Committee (SAC/TC243) centralized.
This standard is drafted by. Hong Kong-Hong cable Material Co., Ltd. in Hangzhou, Zhejiang East Wire Co., Ltd. high-tech light.
Participated in the drafting of this standard. public and Xinjiang Co., Ltd., Fujian Nanping Aluminum Co., Northeast Light Alloy Co., Ltd. Company
Secretary, aluminum Northwest Aluminum Branch, Guangdong Xinhe Aluminium Co., Ltd., Guangdong Huachang Aluminum Co., Ltd., Zhejiang Jiangyin Yu Welding New Materials Technology
Limited.
The main drafters of this standard. Xiejiang Liang Shen Liang Jun, SONG, Zheng Zhirong, light Yao, Li Jun, Ho Kwok-heavy, Lin Jie, Zhou Xia, high Xinyu,
Cao your water, nature Tang Yu, Chen Jijiang.
Aluminum and aluminum alloy wire rod and wire production safety norms
1 Scope
This standard specifies the requirements for the safe operation of the basic safety requirements for aluminum and aluminum alloy wire rod and wire products production, equipment, facilities, accident
Contingency plans and emergency measures.
This standard applies to aluminum and aluminum alloy wire rod production and safety wire.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB 4387 industrial enterprises in railway and road transport safety regulations
GB 6222 industrial enterprises Gas Safety Regulations
GB 11984 Safety rules chlorine
GB 30078-2013 deformable aluminum and aluminum alloy ingot production safety norms
GB 50016 architectural design code for fire protection
GB 50029 air station design specifications
GB 50053 10kV substation and below design specifications
GB 50059 35 ~ 110kV substation design specifications
GB 50074 Oil Depot Design Specification
GB 50195 gas station design specifications
AQ3014 chlorine use - Safety requirements
AQ/T 9002-2006 production and business units of production safety accident emergency response plan guidelines
JB/T 5771.1 molten aluminum packages - Part 1. Basic parameters
JB/T 5771.2 molten aluminum packages - Part 2. Technical requirements
SY6186 oil and gas pipeline safety regulations
YS/T 769.1-2011 production of aluminum and aluminum alloy tubes, rods, profiles Safety specifications - Part 1. extrusion, rolling and stretching
3 Terms and Definitions
Terms and definitions defined in GB 30078-2013 apply to this document.
4 Basic Safety Requirements
Enterprise 4.1 should refer to Appendix A developing hazard identification, risk assessment and risk control survey.
Each member should check and confirm before the device is running 4.2 intact. During operation, do not allow direct contact with the rotating parts of the body, the operation should make
With a special tool.
4.3 boot, keep all parts of safety equipment is turned off.
4.4 Production site emergency lighting facilities shall be provided to ensure that power outages at night to provide temporary lighting can cause shutdown.