YS/T 10-2008 (YS/T10-2008, YST 10-2008, YST10-2008)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| YS/T 10-2008 | English | 289 |
Add to Cart
|
3 days [Need to translate]
|
Furnace tending assembly
| Valid |
YS/T 10-2008
|
Standards related to: YS/T 10-2008
| Standard ID | YS/T 10-2008 (YS/T10-2008) | | Description (Translated English) | Furnace tending assembly | | Sector / Industry | Nonferrous Metallurgy Industry Standard (Recommended) | | Classification of Chinese Standard | H90 | | Classification of International Standard | 77.180 | | Word Count Estimation | 11,112 | | Date of Issue | 2008-03-12 | | Date of Implementation | 2008-09-01 | | Older Standard (superseded by this standard) | YS/T 10-1991 | | Drafting Organization | Guiyang Aluminum Magnesium Design and Research Institute | | Administrative Organization | National Standardization Technical Committee of non-ferrous metals | | Regulation (derived from) | NDRC Notice No. 25 of 2008 | | Summary | This standard specifies the anode baking furnace multifunction unit (hereinafter referred to as units) requirements, test methods, inspection rules and signs, packaging, and transportation. This standard applies to the anode baking furnace multifunction unit. | YS/T 10-2008
Furnace tending assembly
ICS 77.180
H90
People's Republic of China Nonferrous Metals Industry Standard
Replacing YS/T 10-1991
Anode baking furnace multifunction unit
Posted 2008-03-12
2008-09-01 implementation
National Development and Reform Commission issued
Foreword
Instead of the standard YS/T 10-1991 "anode baking furnace multifunction unit."
This standard YS/T 10-1991 "anode baking furnace multifunction unit" compared to the main changes are as follows.
--- Added "About" section;
--- A reference standard modifications and supplements;
--- To modify the model representation method, and to increase the markup example;
--- Structural diagram of the unit has been modified;
--- The unit parameter table has been modified;
--- The unit work environment has been modified;
--- Increase lubrication system;
--- The main unit of material and heat treatment requirements corresponding provisions;
--- Main parts of the unit were related requirements;
--- Security units, health references GB/T 14405 regulations "universal bridge crane," the;
--- Electrical system revised accordingly.
This standard by the National Standardization Technical Committee of non-ferrous metals and centralized.
This standard is drafted by. Guiyang Aluminium Magnesium Design Institute, Shenyang Metallurgical Machinery Co., Ltd.
Participated in the drafting of this standard. Zhuzhou Tianqiao Crane Co., Ltd., Fushun Aluminum Co., Ltd.
The main drafters of this standard. Bing, Wang Xiang Village, Yangzhen Rong, Zhao Yan Bin, Xu Hongwen, Huxiu Fen, Shu Ru.
This standard replaces the standards previously issued as follows.
--- YS/T 10-1991.
Anode baking furnace multifunction unit
1 Scope
This standard specifies the anode baking furnace multifunction unit (hereinafter referred to as units) requirements, test methods, inspection rules and signs, packaging,
And transportation.
This standard applies to the anode baking furnace multifunction unit.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to this part of the research agreement
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 699 high-quality carbon structural steel
GB/T 985 gas welding, SMAW basic form and GMAW welding groove and size
GB/T 986 submerged arc weld groove basic type and size
GB/T 1228 high strength steel with large hexagon head bolts (GB/T 1228-2006, ISO 7412. 1984NEQ)
GB/T 1229 steel with high strength large hexagon nuts (GB/T 1229-2006, ISO 4775. 1984NEQ)
GB/T 1230 high-strength steel washer (GB/T 1230-2006, ISO 7416. 1984NEQ)
GB/T 1231 Steel hexagon head bolts, hexagon nuts, plain washers for high-strength
GB/T 1239.2 Cold coiled helical compression springs - Technical specifications
GB/T 1239.4 hot coiled helical springs - Technical specifications
GB/T 1720 film adhesion assay
GB/T 3181 standard paint colors
GB/T 3323 metal fusion welded joints radiography
GB/T 3811 crane design specification (GB/T 3811-1983, neq ISO 4301. 1980)
GB/T 5905 Cranes - Test code and procedures (GB/T 5905-1986, neq ISO 4310. 1981)
GB/T 5972 crane wire rope inspection and scrap of practice (GB/T 5972-1986, eqv ISO 4309. 1981)
GB/T 6067 crane safety regulations (GB/T 6067-1985, neqNFE52-122. 1975)
GB/T 6388 transportation, packaging, shipping mark
GB/T 6417 metallic fusion welds, defect classification and description (GB/T 6417-1986, eqv ISO 6520. 1982)
GB/T 8918 wire rope (GB/T 8918-1996, eqv ISO 2408. 1985)
GB/T 10051.2 lifting hook shank hook technical conditions (GB/T 10051.2-1988, eqvDIN15401)
GB/T 10183 Bridge and gantry crane manufacturing and track installation tolerance (GB/T 10183-1988, eqv ISO 8306. 1985)
GB/T 13384 mechanical and electrical products packaging General technical conditions
GB/T 13539 (all parts), Low Voltage Fuse
GB/T 14048 (all parts), low-voltage switchgear and control equipment standard series
GB/T 14405-1993 General bridge crane (GB/T 14405-1993, neq ISO 8306)
GB/T 15052 crane Dangerous positions and signs
GB/T 20303.5 crane cab - Part 5. Bridge and gantry cranes (GB/T 20303.5-2006,
ISO 7752NEQ)
GB 50054 low voltage power distribution design specifications
...
|