HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

WS/T 653-2019 English PDF

US$349.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
WS/T 653-2019: Facilities of hospital inpatient bed
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
WS/T 653-2019English349 Add to Cart 3 days [Need to translate] Facilities of hospital inpatient bed Valid WS/T 653-2019

PDF similar to WS/T 653-2019


Standard similar to WS/T 653-2019

WS/T 655   GB/T 36388   GB 18469   WS/T 656   WS/T 654   

Basic data

Standard ID WS/T 653-2019 (WS/T653-2019)
Description (Translated English) Facilities of hospital inpatient bed
Sector / Industry Health Industry Standard (Recommended)
Classification of Chinese Standard C05
Word Count Estimation 14,158
Date of Issue 2019-10-18
Date of Implementation 2020-05-01
Regulation (derived from) National Health Communication (2019) No. 11
Issuing agency(ies) National Health Commission

WS/T 653-2019: Facilities of hospital inpatient bed

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Facilities of hospital inpatient bed ICS 11.020 C 05 WS People's Republic of China Health Industry Standard Hospital ward bed unit facilities 2019-10-18 released 2020-05-01 implementation Published by the National Health Committee of the People's Republic of China

Contents

Foreword ... II 1 Scope ... 1 2 Normative references ... 1 3 Terms and definitions ... 1 4 Basic principles ... 2 5 Bed units ... 2 6 Intensive care unit ... 7 7 Psychiatric specialist bed units ... 10 References ... 11

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard was drafted. Institute of Hospital Management, National Health and Health Commission, Peking Union Medical College Hospital, Chinese Academy of Medical Sciences, Peking University Third Hospital, Peking University People's Hospital, Capital Medical University Xuanwu Hospital, Beijing Children's Hospital Affiliated to Capital Medical University, Beijing Huilongguan Hospital, Beijing Ditan Hospital, Capital Medical University, Beijing Obstetrics and Gynecology Hospital, Capital Medical University. Drafters of this standard. Zhou Bin, Yu Qing, Yu Zonghe, Hong Yan, Wang Ling, Zu Li'an, Yang Junhua, Guo Yu, Zhang Hongjun, Xu Dongmei, Sun Hong, Du Bin, Yang Yan, Jiang Mei, Shi Xue, Zhou Hongzhu, Zhao Yue, Chen Fengxin, Li Xiaoying. Hospital ward bed unit facilities

1 Scope

This standard specifies the basic facilities configuration requirements for hospital ward bed units. The provisions on the number of patient clothes per bed in this standard apply to hospitals at the second level and above, and other provisions apply to hospitals at all levels. Community health service centers and township (including center) hospitals can be implemented by reference.

2 Normative references

The following documents are essential for the application of this document. For dated references, only the dated version applies to this article Pieces. For undated references, the latest version (including all amendments) applies to this document. WS 444.2 Safety Requirements for Patients' Activities and Sitting and Sitting Facilities in Medical Institutions Part 2. Sitting and Sitting Facilities YY 0003 hospital bed

3 terms and definitions

The following terms and definitions apply to this document. 3.1 Bed unit General hospital furniture, facilities, and equipment provided to the inpatient for inspection, diagnosis, care, rest, sleep, diet Called. 3.2 Common bed Lying facilities for patients to rest, sleep and receive medical treatment in the general ward. 3.3 Intensive care bed The hospital is located in a medical unit (intensive care unit) that centrally monitors and treats critically ill patients or in general wards Lying facilities for critically ill patients. 3.4 Adult bed Reclining facilities for adult patients or children who cannot accommodate a cot. 3.5 Child bed Reclining facilities for children over 5 years old. 3.6 Infant bed Lying facilities for children over 28 days to under 5 years old. 3.7 Newborn bed Lying facilities for newborns and infants from 0 to 28 days. 3.8 Mobile table Dedicated small table that can be moved and placed on the bed. 3.9 Isolation curtain (or screen) Device to protect patient privacy.

4 basic principles

4.1 The configuration of the bed unit is based on patient safety, comfort and benefits for treatment, care and rehabilitation. 4.2 Each "specification" in this document is the net size of the patient when it is in use (after shrinking the cotton cloth). 4.3 Each “specification size” ± standard deviation (standard deviation = specification size × 5%) of this document is in compliance with the requirements. 4.4 The number of bed facility configurations in this document is calculated on the basis of each bed. 4.5 If equipped with a mobile power socket, it should be hung from a wall (or equipment tower).

5 Bed units

5.1 Adult Bed 5.1.1 Specifications 5.1.1.1 The bed surface shall meet the requirements of YY 0003. 5.1.1.2 The length of the mattress is reduced by 5cm from the length of the bed surface, the width is the same as the width of the bed surface, and the thickness is 10cm ~ 15cm. 5.1.1.3 The length and width of the mattress shall be the same as that of the mattress. The core shall be made of a material that is easy to clean, disinfect and disassemble. 5.1.1.4 Pillow cores are 60cm in length and 40cm in width. Materials that are easy to clean and disinfect should be selected. 5.1.1.5 The length of the quilt is 210cm and the width is 155cm. Materials that are easy to clean and disinfect should be selected. 5.1.1.6 Large single length 250cm, width 180cm. 5.1.1.7 The length of the bedspread is 210cm, the width is 100cm, and the height is 20cm. 5.1.1.8 Pillowcases are 65cm in length and 45cm in width. 5.1.1.9 Quilt cover is 250cm in length and 165cm in width. 5.1.1.10 The rubber sheet is 85cm in length and 65cm in width, and the left and right ends are sewn with cotton, and the cotton is 40cm in length. 5.1.1.11 The mid length is 170cm and the width is 85cm. 5.1.1.12 The length of the urine pad is 70cm and the width is 70cm. It should be made of towel cloth (or pure cotton cloth) with a thickness of not less than 4 layers. 5.1.1.13 Patient clothes should have different models. 5.1.1.14 Large sheets, bedspreads, pillowcases, duvet covers, mid-single sheets, and patient clothes should be made of pure cotton. 5.1.1.15 The bedside table has a length of 43cm-50cm, a width of 40cm-50cm, and a height of 75cm-80cm, and is placed on the side of the bedside of the patient. 5.1.1.16 The mobile table (over-bed table) can be mounted on the bed stop using the bed end plate. 5.1.2 Configuration 5.1.2.1 For a total of 20 to 99 hospital beds, the configuration of adult bed facilities shall meet the requirements of Table 1. Table 1 Hospital bed configuration of 20 to 99 beds Number Facility Name Quantity Unit 1-1 beds 1-2 mattresses 1.2 1-3 mattresses 1.2 1-4 Pillows 2 1-5 quilts 1.2 1-6 large orders (or bedspreads) 3 1-7 Pillowcases 4 1-8 duvet covers 1-9 Configure the appropriate number of rubber sheets as required 1-10 Medium order configure an appropriate number as required 1-11 Configure the appropriate number of pads as needed 1-12 patient service 2.5 sets 1-13 bedside table 1-14 bedside chair (stool) 1 1-15 thermos 1.05 1-16 thermometer 1.2 1-17 Infusion stand (or hanging rail) 0.6 (or 1) 1-18 Power socket (or multi-function socket) ≥ 2 1-19 isolation curtain 1-20 large and urinals (non-disposable) 0.2 1-21 1 trash basket 1-22 headboard 5.1.2.2 The total number of hospital beds is 100 or more. One bedside lighting lamp, one bedside calling device, Power socket (or multi-function socket) 2. 5.1.2.3 The total number of hospital beds is 500 or more. On the basis of 5.1.2.2, 0.3 mobile beds (beds) should be added. 5.1.2.4 The total number of hospital beds is ≥200, and one set of infusion hanging rails and one set of oxygen supply and negative pressure suction pipelines should be provided. 5.1.2.5 Bed guardrails should be segmented. 5.2 Children's bed 5.2.1 Specifications 5.2.1.1 The length of the bed surface is 180cm, the width is 85cm, the height from the ground is 60cm to 65cm, and the height of the bed head and foot end is 103cm. 5.2.1.2 There should be guardrails on both sides of the bed, the height of the guardrail is 36cm, and the gap between the guardrails should meet the requirements of WS 444.2. 5.2.1.3 The mattress is 175cm in length, 85cm in width, and 10cm in thickness. It is a soft mattress. 5.2.1.4 The mattress shall be 175cm in length and 85cm in width. The core shall be made of materials that are easy to clean and disinfect. 5.2.1.5 Pillow cores are 60cm in length and 35cm in width. Materials that are easy to clean and disinfect should be selected. 5.2.1.6 The length of the quilt core is.200cm and the width is 140cm. Materials that are easy to clean and disinfect should be selected. 5.2.1.7 Large single length 240cm, width 140cm. 5.2.1.8 The length of the bedspread is 185cm, the width is 90cm, and the height is 40cm. 5.2.1.9 Pillowcases are 65cm in length and 40cm in width. 5.2.1.10 Quilt cover is 210cm in length and 150cm in width. 5.2.1.11 The length of the rubber sheet is 100cm and the width is 40cm. The left and right ends are sewn with cotton cloth. 5.2.1.12 The mid length is 170cm and the width is 80cm. 5.2.1.13 Patient clothes should have different models. 5.2.1.14 Large sheets, bedspreads, pillowcases, duvet covers, middle sheets, and patient clothes should be made of pure cotton. 5.2.1.15 The bedside table is 43cm ～ 50cm in length, 40cm ～ 50cm in width, and 75 ～ 80cm in height. edges and corners. 5.2.2 Configuration 5.2.2.1 For hospital beds with a total of 20 to 99 beds, the configuration of child crib facilities shall meet the requirements of Table 2. Table 2 Hospital crib facilities with a total of 20 to 99 beds Number Facility Name Quantity Unit 2-1 beds 2-2 mattresses 1.2 2-3 mattresses 1.2 2-4 pillows 1.2 2-5 quilts 1.2 2-6 large orders (or bedspreads) 3 2-7 Pillowcases 4 2-8 duvet covers 2-9 rubber sheet 1 2-10 Medium orders are configured with an appropriate number as required 2-11 3 sets of patient clothes 2-12 bedside tables 2-13 bedside chair (stool) 1 2-14 thermometer 1.2 2-15 Infusion stand (or hanging rail) 1 (or 1) 2-16 power socket (or multi-function socket) ≥1.5 2-17 curtain 2-18 Urinals (non-disposable) 0.2 2-19 1 trash basket 2-20 headboard 5.2.2.2 The total number of hospital beds is 100 or more. In addition to 5.2.2.1, one bedside lamp and one bedside calling device shall be added. 5.2.2.3 The total number of hospital beds is.200 or more. Based on 5.2.2.2, an appropriate number of drinking buckets shall be allocated as required. 5.2.2.4 The total number of hospital beds is.200 or more, and one set of oxygen supply and negative pressure suction pipelines should be provided. 5.2.2.5 Bed guardrails should be segmented. 5.3 Infant bed 5.3.1 Specifications 5.3.1.1 The length of the bed surface is 140cm, the width is 80cm, the height is 70cm to 75cm, and the height of the head and foot of the bed is 135cm. 5.3.1.2 There should be guardrails around the bed. Guardrail height is 60cm. Guardrail clearance shall comply with WS 444.2. 5.3.1.3 The mattress is 140cm in length, 80cm in width, and 10cm in thickness. It is a soft mattress. 5.3.1.4 The mattress shall be 140cm in length and 80cm in width. The core shall be made of materials that are easy to clean and disinfect. 5.3.1.5 Pillow cores are 60cm in length and 35cm in width. Materials that are easy to clean and disinfect should be selected. 5.3.1.6 The length of the quilt shall be 150cm and the width shall be 120cm. Materials that are easy to clean and disinfect shall be selected. 5.3.1.7 Large single length.200cm, width 140cm. 5.3.1.8 The length of the bedspread is 150cm, the width is 90cm, and the height is 40cm. 5.3.1.9 Pillowcases are 65cm in length and 40cm in width. 5.3.1.10 Quilt cover length 155cm, width 130cm, opening at the tail end, with lacing. 5.3.1.11 The length of the rubber sheet is 100cm and the width is 35cm. The left and right ends are sewn with cotton, and the length of the cotton is 30cm. 5.3.1.12 The middle order (long bag order) is 140cm in length and 80cm in width. 5.3.1.13 Patient clothes should have different models and use monk collars. 5.3.1.14 Large orders, bedspreads, pillowcases, duvet covers, middle orders (long bag orders), and patient clothing shall be made of pure cotton. 5.3.1.15 The bedside table has a length of 43cm ～ 50cm, a width of 40cm ～ 50cm, and a height of 75cm ～ 80cm. No corners. 5.3.1.16 The round table is 60cm in diameter and 60cm in height. 5.3.1.17 The height of the small seat is 30cm. 5.3.2 Configuration 5.3.2.1 With a total of 20 to 99 beds in hospitals, the configuration of crib facilities shall meet the requirements of Table 3. Table 3 Hospital bed facilities with a total of 20 to 99 beds Number Facility Name Quantity Unit 3-1 bed 3-2 mattresses 1.2 3-3 mattresses 1.2 3-4 pillows 3-5 quilts 1.2 3-6 large orders (or bedspreads) 3 3-7 pillowcases 4 3-8 duvet covers 3-9 rubber sheet 1 3-10 Medium order (long package order) 1.2 3-11 patient suits 3-12 bedpan 3-13 bedside table 3-14 bedside chair (stool) 1 3-15 thermos 1.05 3-16 thermometer 1.2 3-17 Infusion stand (or hanging rail) 1 Table 3 (continued) Number Facility Name Quantity Unit 3-18 power sockets (and multi-function sockets) 3 3-19 curtain 3-20 headboard 3-21 round table equipped with appropriate number as needed 3-22 Equipped with the appropriate number of small seats as required 5.3.2.2 The total number of hospital beds is 100 or more, and one bedside lighting lamp and one bedside calling device should be added on the basis of 5.3.2.1. 5.3.2.3 The total number of hospital beds is.200 or more, and an appropriate number of drinking buckets should be allocated based on 5.3.2.2. 5.3.2.4 The total number of hospital beds is.200 or more, and one set of oxygen supply and negative pressure suction pipelines should be provided. 5.4 Newborn bed 5.4.1 Specifications 5.4.1.1 The length of the bed is 80cm, the width is 45cm ～ 50cm, the bed is surrounded by the bed, the height of the head is 20cm ～ 30cm, and the height of the tail is 15cm ～ 20cm, bed frame height 90cm. 5.4.1.2 Mattresses with a length of 80 cm, a width of 45 cm to 50 cm, and a thickness of 5 cm are soft mattresses. 5.4.1.3 The mattress shall be 82cm in length and 50cm to 55cm in width. The core shall be made of a material that is easy to clean and disinfect. 5.4.1.4 The length of the quilt core is 100cm and the width is 90cm. Materials that are easy to clean and disinfect should be selected. 5.4.1.5 The sheets are 140cm in length and 80cm in width. 5.4.1.6 Quilt cover is 110cm in length and 95cm in width, with the opening at the tail end. 5.4.1.7 The square bag is 90cm in length and 90cm in width. 5.4.1.8 Patients' clothing should be without collar. 5.4.1.9 Bed sheets, quilts, square sheets, and patient clothes should be made of pure cotton. 5.4.1.10 The bedside table has a length of 43cm ～ 50cm, a width of 40cm ～ 50cm, and a height of 75cm ～ 80cm. No corners. 5.4.2 Configuration 5.4.2.1 The configuration of the crib facilities shall meet the requirements of Table 4. Table 4 Baby bed facility configuration Number Facility Name Quantity Unit 4-1 beds 4-2 mattresses 1.2 4-3 mattresses 1.2 4-4 Quilt (or core) 2 4-5 sheets (or bedspreads) 3 4-6 Quilt cover (or cover) 3 4-7 square package 5 4-8 Patient Services 5 sets 4-9 bedside tables 4-10 thermometers 1.4 Table 4 (continued) Number Facility Name Quantity Unit 4-11 Infusion stand (or hanging rail) 1 4-12 Power socket (or multi-function socket) 3 4-13 2 headboards 4-14 Appropriate number of hot milk containers 5.4.2.2 The neonatal ward should be equipped with 3 blue light boxes and 3 newborn incubators. 5.4.2.3 If the total number of hospital beds is.200 or more, it is advisable to provide one set of oxygen supply and negative pressure suction pipe devices.

6 intensive care unit

6.1 Adult intensive care bed 6.1.1 Specifications 6.1.1.1 The length of the bed is.200cm and the width is 90cm; the bed can be lifted. The head and foot of the bed can be lifted and disassembled. The maximum height of the bed head is ≥60 °, The maximum knee lift (or foot end lift) is ≥25 °. 6.1.1.2 The foot of the bed shall have casters and parking system. 6.1.1.3 There should be guardrails on both sides of the bed, with a total length of ≥150cm on each side. 6.1.1.4 Other facilities shall comply with the requirements of 5.1.1.1 ～ 5.1.1.16. 6.1.2 Configuration The configuration of adult intensive care bed facilities should meet the requirements of Table 5. Table 5 Adult ICU bed facility configuration Number Facility Name Quantity Unit 5-1 beds 5-2 mattresses 1.2 5-3 mattresses 1.2 5-4 Pillows 3 5-5 quilts 1.2 5-6 large orders (or bedspreads) 4 5-7 4 pillowcases 5-8 quilt covers 4 5-9 Configure the appropriate number of rubber sheets as required 5-10 Medium Order Configure the appropriate number as required 5-11 Configure the appropriate number of pads as needed 5-12 patient service 3 sets 5-13 bedside table 5-14 bedside chair (stool) 1 5-15 Mobile table (bed table) 1 5-16 Inflatable anti-ulcer mattress 0.6 Table 5 (continued) Number Facility Name Quantity Unit 5-17 Over bed easy 0.2 5-18 thermometers 1.3 5-19 Infusion stand (or hanging rail) 2 (or 1) 5-20 1 infusion pump 5-21 micro pump 1.5 5-22 Power sockets (and multi-function sockets) ≥10 5-23 multi-parameter monitor 5-24 ventilator 0.6 5-25 Simple Breathing Apparatus 5-26 1 set of oxygen and negative pressure suction 5-27 call device 1 set 5-28 bedside lamp 1 5-29 curtain 5-30 urinals (non-disposable) 0.5 5-31 1 headboard 6.2 Child Intensive Care Bed 6.2.1 Specifications 6.2.1.1 The length of the bed surface is.200cm and the width is 90cm; it can be raised and lowered; the head and foot of the bed can be raised and disassembled; the maximum head height is ≥60 °; Raise the big knee (or the end of the bed) ≥ 25 °. 6.2.1.2 The soft mattress (no mattress is required) is 195cm in length, 90cm in width, and 10cm to 15cm in thickness. 6.2.1.3 The length of the bedspread is 210cm, the width is 100cm, and the height is 40cm. It should be made of pure cotton. 6.2.1.4 The foot of the bed shall have casters and parking system. 6.2.1.5 There shall be guardrails on both sides of the bed body, the total length of each side shall be ≥150cm, and the gap between the guardrails shall meet the requirements of WS 444.2. 6.2.1.6 Bed guardrails should be segmented. 6.2.1.7 The moving table is 75cm in length and 50cm in width and can be lifted. 6.2.1.8 Other configurations shall comply with the requirements of 5.2.1.5 ～ 5.2.1.7 and 5.2.1.9 ～ 5.2.1.15. 6.2.2 Configuration The configuration of child intensive care facilities should meet the requirements of Table 6. Table 6 Child intensive care bed facility configuration Number Facility Name Quantity Unit 6-1 beds 6-2 mattresses 1.2 6-3 Pillows 6-4 quilt 1.2 Table 6 (continued) Number Facility Name Quantity Unit 6-5 large orders (or bedspreads) 4 6-6 pillowcases 6-7 quilt covers 4 6-8 Rubber sheet is configured with an appropriate number as required 6-9 Medium 2 6-10 patient service 3 sets 6-11 bedside table 6-12 Mobile table (over bed table) 1 6-13 Thermometer 1.4 6-14 Infusion stand (or hanging rail) 1 6-15 1 infusion pump 6-16 micro pump 1 6-17 Power sockets (and multi-function sockets) 8 6-18 multi-parameter monitor 6-19 pediatric ventilator 0.5 6-20 Simple Breathing Apparatus 6-21 Oxygen and negative pressure attract 1 set 6-22 Calling device 1 set 6-23 bedside lamp 1 6-24 isolation curtain 1 set 6-25 Urinals (non-disposable) 0.5 6-26 1 headboard 6.3 neonatal intensive care bed 6.3.1 Specifications 6.3.1.1 The bed of the rescue table or closed incubator is 114cm in length and 66cm in width. The shelter can be closed and opened. When the awning is closed, The descending height is 147cm and the ascending height is 177cm. When the shelter is opened, the descending height is 208cm and the ascending height is 236cm. 6.3.1.2 The soft mattress (no mattress required) is 100cm in length, 60cm in width, and 10cm in thickness, which matches the bed. 6.3.1.3 Shading blankets or other shading facilities shall be provided. 6.3.1.4 Other facilities shall comply with the requirements of 5.4.1.5 ～ 5.4.1.10. 6.3.2 Configuration The configuration of neonatal intensive care bed facilities should meet the requirements of Table 7. Table 7 Settings of neonatal intensive care bed settings

7 psychiatric bed units

7.1 The non-open management ward bed unit facility configuration shall exclude the thermos and bedside chair (stool) in the provisions of Table 1. 7.2 Constraints shall be provided at 10% of the number of beds. 7.3 Appropriate number of drinking devices shall be provided as required. 7.4 Other facilities may comply with the requirements of Chapter 5 according to the actual situation of mental hospitals. Number Facility Name Quantity Unit 7-1 beds 7-2 mattresses 1.2 7-3 sheets 3 7-4 square package list 3 7-5 Patient Suits 7-6 bedside tables 7-7 thermometer 1.4 7-8 Infusion stand (or hanging rail) 1 7-9 1 infusion pump 7-10 micro pump 1 set 7-11 power sockets (and multi-function sockets) 8 7-12 multi-parameter monitor 7-13 infant ventilator 0.3 7-14 Self-inflating airbag and mask (or simple Respirator) 7-15 oxygen supply device 1 set 7-16 negative pressure suction device 1 set 7-17 bedside lamp 1 7-18 Blackout blanket 7-19 Headboard references [1] Regulations on the Administration of Medical Institutions Order No. 149 of the State Council [2] Implementing Rules and Regulations of the Medical Institution Management Regulations Order No. 35 of the Ministry of Health [3] Basic Standards for Medical Institutions (Trial) Wei Yi Fa (1994) No. 30 [4] Li Xiaohan, Shang Shaomei, Chief Editor of Basic Nursing, People's Medical Publishing House, August.2012, 5th edition [5] Guidelines for the Construction and Management of the Chinese Intensive Care Unit (ICU), Chinese Medical Association Critical Medicine Branch, April.2006

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of WS/T 653-2019_English be delivered?

Answer: Upon your order, we will start to translate WS/T 653-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of WS/T 653-2019_English with my colleagues?

Answer: Yes. The purchased PDF of WS/T 653-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.