HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

WS/T 543.5-2017 English PDF

US$349.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
WS/T 543.5-2017: Resident health card technical specifications - Part 5: Terminal technical specification
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
WS/T 543.5-2017English349 Add to Cart 3 days [Need to translate] Resident health card technical specifications - Part 5: Terminal technical specification Valid WS/T 543.5-2017

PDF similar to WS/T 543.5-2017


Standard similar to WS/T 543.5-2017

WS/T 655   WS 310.1   YBB 0008   WS/T 543.2   WS/T 543.3   WS/T 543.1   

Basic data

Standard ID WS/T 543.5-2017 (WS/T543.5-2017)
Description (Translated English) Resident health card technical specifications - Part 5: Terminal technical specification
Sector / Industry Health Industry Standard (Recommended)
Classification of Chinese Standard C07
Word Count Estimation 14,169
Date of Issue 2017-07-25
Date of Implementation 2017-12-01
Regulation (derived from) State-Health-Communication (2017) 8
Issuing agency(ies) National Health and Family Planning Commission of the People's Republic of China

WS/T 543.5-2017: Resident health card technical specifications - Part 5: Terminal technical specification


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Resident health card technical specifications-Part 5.Terminal technical specification ICS 11.020 C 07 WS People's Republic of China Health Industry Standard Technical Specifications for Resident Health Card Part 5.Terminal Technical Specifications 2017-07-25 released 2017-12-01 implementation Issued by the National Health and Family Planning Commission of the People's Republic of China

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. WS/T 543 "Technical Specifications for Resident Health Cards" is divided into 6 parts. --Part 1.General provisions; --Part 2.Technical Specifications of User Card; --Part 3.User Card Application Specification; --Part 4.User card command set; --Part 5.Terminal technical specifications; --Part 6.User card and terminal product testing specifications; This part is part 5 of WS/T 543. Drafting organizations of this section. National Health and Family Planning Commission Statistical Information Center, Foshan Municipal Health and Family Planning Bureau, Liaoning Provincial Health Information Center, Henan Provincial Health and Family Planning Commission Information Center, Jiangsu Provincial Health Statistics Information Center, the First Affiliated Hospital of China Medical University. The main drafters of this section. Tang Xuejun, Wang Cunku, Hu Wensheng, Yang Bo, Yang Zuosen, Nie Xiaoyang, Wang Yongfeng, Ma Fei, Liu Xiaoqiang, Shao Wei, Liu Juan, Xu Fenglong, Meng Qingyun. Resident Health Card Technical Specifications Part 5.Terminal Technical Specifications

1 Scope

This part of WS/T 543 specifies the product form, appearance structure, function, Communication methods, safety modules, power supplies, interfaces, climate environmental conditions, mechanical environmental conditions, reliability, safety, electromagnetic compatibility, etc. The above technical details put forward the requirements for the terminal sign, packaging, transportation and storage of the residents’ health card. This part is applicable to the research and development units, management agencies, issuing agencies and users that design, produce, issue, and use resident health card terminals Unit etc.

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this document. For undated references, the latest version (including all amendments) applies to this document. GB/T 191 Packaging, Storage and Transportation Graphic Mark GB 4943 Safety of Information Technology Equipment GB/T 6107 Interface between data terminal equipment and data circuit termination equipment using serial binary data exchange GB 9254 Information Technology Equipment Radio Disturbance Limits and Measurement Methods GB/T 14916 Identification card physical characteristics GB/T 16649.3 Identification card with contact integrated circuit card Part 3.Electrical signal and transmission protocol GB/T 17618 Information Technology Equipment Immunity Limits and Measurement Methods GB/T 17625.1 EMC limit harmonic current emission limit (equipment input current per phase≤16A) JR/T 0025 China Financial Integrated Circuit (IC) Card Specification ISO /IEC 7810 identification card physical characteristics ISO /IEC 7811 identification card recording technology ISO /IEC 14443 identification card non-contact integrated circuit card proximity card 3 Terms and definitions, abbreviations 3.1 Terms and definitions The following terms and definitions defined in WS/T 543.1 apply to this document. 3.1.1 Integrated circuit card ID-1 type card with one or more integrated circuits (as described in ISO 7810, ISO 7811, ISO 7812 and ISO 7813). 3.1.2 Resident health card terminal Resident health card terminals such as handheld resident health card readers, desktop IC card readers, built-in or external (host computer) Readers for people's health cartoons. This type of product can complete identification and various operations on residents' health cards in online or offline mode with the computer. 3.1.3 Resident health card self-service terminal Special equipment or devices provided by service providers to implement self-service for residents' health cards. 3.2 Abbreviations and symbols The abbreviations and symbols in Table 1 apply to this document.

4 Basic requirements

4.1 Product form The product form is as follows. --Resident health card reader. - Resident health card self-service terminal. 4.2 Appearance and structure details as follows. --The structure should be complete and tidy; the surface coating should be even, and there should be no blistering, cracking, shedding or abrasion; there should be no obvious dents, Damage, scratches, deformation and pollution, etc.; metal parts and components should be free from corrosion and other mechanical damage; --The connection of the parts and components of the terminal should be tight and not loose; - There should be no temporary wiring inside or outside the terminal; --The indicator light should be clearly marked; --The terminal should have nameplates, signs and trademarks. 4.3 Function 4.3.1 Main functions It can read the data in the resident's health card chip, and the time for the terminal to read the card to identify the information in the data area does not exceed 1s, and the built-in SAM card is used For safety authentication function. The resident health card reader/writer needs to have an indicator light prompt function. 4.3.2 Contact card interface Should comply with JR/T 0025 regulations. 4.3.3 SAM card interface --Have at least one SAM card holder with ID-000 specifications that meets the requirements of GB/T 14916; --The communication protocol complies with GB/T 16649.3, and supports reading and writing CPU cards with T=0 protocol. 4.3.4 Contactless card interface details as follows. --Comply with ISO /IEC 14443 (TypeA and TypeB) standards; --With collision detection function, there will be prompt function when collision is detected; --The field strength range is 1.5A/m ~7.5A/m, the reading distance of non-sucking card readers is 0cm ~ 3cm, the slotting electric card reader The card reading distance is 0cm-3cm. 4.4 Communication method 4.4.1 Terminal communication interface The terminal communication interface is a USB interface or RS232-C interface, which meets the communication interface requirements of GB/T 6107, and can be connected to a computer or Other server equipment. Download operation commands to the terminal via the communication interface and receive information returned by the terminal. 4.4.2 USB data transfer mode The USB communication transmission of this terminal adopts HID protocol. The HID agreement is as follows. 4.4.3 RS232-C data transmission mode The RS232-C communication transmission of this terminal adopts parameter setting as shown in Table 2. 4.4.4 Interface function definition Refer to Appendix A for the definition of interface functions. 4.5 Power --Resident Health Card Reader. For the computer USB interface power supply mode, when the computer is working normally, the terminal should work normally. The terminal should have protection measures such as power failure, overcurrent, overvoltage, short circuit, and reverse polarity. When the voltage returns to normal, it can automatically return to normal Work often. For residents' health card readers that adopt direct current power supply. they work normally under rated voltage conditions. - Resident health card self-service terminal. The product should work normally under the conditions of frequency 50Hz and voltage 220V. 4.6 SAM card interface requirements 4.6.1 General requirements The logical interface and communication protocol of the terminal should conform to the relevant content in the GB/T 16649.3 specification, and the terminal should provide at least one SAM card connection 口, mainly responsible for the security authentication function of the card. The terminal must support the T=0 transmission protocol. 4.6.2 SAM card interface contact assignment table See Table 3 for the allocation table of contacts of contact equipment. 4.6.3 Contact pressure The pressure applied by any one interface device contact to the corresponding IC card contact should be between 0.2N and 0.6N. 4.6.4 Contact resistance During the entire design life of the terminal, the contact resistance (when measured between a clean interface device and a clean standard SAM card contact) Should be less than 500mΩ. 4.6.5 Electrical characteristics of CLK The frequency range is between 1MHz～5MHz (when operating on type A card) or 1MHz～4MHz (when operating on type B card), and the whole During the transaction, the range of change should not exceed 1%. The clock duty factor should be between 45% and 55% of its stable operation period. 4.6.6 Reset (RST) The terminal generates a reset signal with the characteristics shown in Table 4. 4.6.7 Power supply voltage (VCC) The terminal provides 5V, 0.4V (when operating on type A cards) or 3V, 0.2V (when operating on type B cards), and can output stably 0～55mA (when operating on type A cards) or 0～45mA (when operating on type B cards). The terminal should be equipped with a protection circuit to prevent Damage caused by operation (such as short-circuit to ground or VCC). Misoperation may come from internal or external interfaces such as power supply Interference, communication link failure, etc. 4.7 Climate and environmental conditions The climate and environment adaptability is divided into two levels, as shown in Table 5.The severity level of the climate environment and the test items after the test are stipulated by the product specifications. 4.8 Mechanical environmental conditions The mechanical environmental conditions are shown in Table 6~Table 9.After the mechanical environment test, the product should maintain good appearance and electrical performance, and meet the product specifications Functional requirements. Note 1.The driving amplitude in the table is the peak value. Note 2.After finishing the appearance and structure inspection, the card reading should work normally after power-on. 4.9 Reliability requirements The mean time between failures (MTBF) of the terminal is not less than 5000h. 4.10 Security requirements 4.10.1 General requirements Meet the relevant regulations of GB 4943. 4.10.2 Touch current and protective conductor current The design and structure of the terminal should ensure that neither contact current nor protective conductor current can cause an electric shock hazard. 4.10.3 Electric strength requirements The solid insulation used in the terminal should have sufficient electrical strength. 4.10.4 Grounding conductor and its connection resistance The terminal grounding conductor and its connection should not have excessive resistance. 4.11 Electromagnetic compatibility requirements 4.11.1 Radio disturbance limit The radio disturbance limit of the product should meet the requirements of the corresponding level B in GB 9254. 4.11.2 Immunity limit The immunity limit of the product should meet the requirements specified in GB/T 17618. 4.11.3 Harmonic current value The harmonic current value of the product should meet the requirements specified in GB/T 17625.1. 5 Marking, packaging, transportation and storage 5.1 Logo 5.1.1 Product mark The product should have the following signs. --Name of manufacturer; --Product name, model and product number; --Production license number; --trademark. 5.1.2 Packaging box logo The package label should include the following. --Product name and model, manufacturer name and address; --Product implementation standard number; --Product factory date and batch number; --Production license number; -The packaging and storage pictorial signs should meet the requirements of GB/T 191. 5.2 Packaging The packaging of the resident health card self-service terminal shall meet the requirements of moisture-proof, dust-proof and shock-proof. The packing box should contain a packing list, a product factory certificate and other relevant random information. 5.3 Transportation The packaged products are allowed to be transported by any means of transportation. It is strictly forbidden to load and unload savagely during transportation, and avoid rain, snow or other liquids. The body is directly leached. It is strictly prohibited to ship with corrosive materials. The transportation mark should meet the requirements of GB/T 191. 5.4 Storage Without opening the original packaging box, the terminal should be stored in a warehouse with an ambient temperature of -15°C to 45°C and a relative humidity of 30% to 80%. The packaging box for storing the product should be elevated and at least 10cm away from the ground, and at least 50cm away from heat sources, cold sources, windows, and vents. All kinds of harmful gases, flammable and explosive materials, and corrosive chemicals are not allowed in the warehouse, and it should be kept away from strong electromagnetic fields. The storage period is generally 6 months. If it has been stored in the warehouse for more than 6 months, the delivery inspection should be carried out again before leaving the factory.

Appendix A

(Normative appendix) Advanced application programming interface of the device A.1 Overview This appendix describes the high-level application programming interface of the card reader. The advanced application programming interface is a set of functions provided to the application program on the terminal to interact with the card reader. The specific manifestations of the high-level application programming interface include. --Dynamic link that can run under 32-bit Windows environment (Windows95/98/ME, Windows NT/2000/XP, etc.) -C language function library that can run under Unix environment; -Can be based on the C language function library on the specific hardware platform. All the above-mentioned high-level application programming interfaces shall have the uniform library name, function name, parameter type and sequence specified in this specification. Application open The sender or user can use the corresponding library name and function name when programming the card reader. Note. In the following description, the C language style is used to illustrate the functions in the high-level application programming interface. A.2 "Open Device" function A.2.1 Functions A.2.2 Function This function informs the terminal operating system to open the terminal device port corresponding to the interface device so that the two can establish a logical relationship of communication. A.2.3 Parameter description This function has no parameters. A.2.4 Return value If the function is executed successfully, the return value is not less than 0 device handle; otherwise, it means that the function execution failed, and its meaning is determined by the operating system All confirmed. A.3 "Close Device" function A.3.1 Functions A.3.2 Function This function informs the operating system to shut down the specified device. A.3.3 Parameter description 口 device handle. A.3.4 Return value If the function is executed successfully, the return value is 0; otherwise, it means that the function failed to execute, and its meaning is determined by the operating system. A.4 "Reset" function A.4.1 Functions A.4.2 Function This function requires the interface device to wait for a contactless card to enter the field or to insert and reset the SAM card. A.4.3 Parameter description a) ReaderHandle. interface device handle; b) ICC_Slot_No. card slot number, non-contact card slot. 0x00, SAM1.0x0n, where the value range of "n" is 1~F, ESAM. 0x10; c) Response. Pointer to the storage area where response data is stored. d) RespLen return value length. A.4.4 Return value If the function is executed successfully, the return value is 0; otherwise, it means that the function failed to execute, and its meaning is determined by the operating system. In the store Return the card's reset response bytes and the number of bytes in the storage area; if the card reset is unsuccessful, the storage area does not return any data. A.5 "Card power off" function A.5.1 Letter; A.5.2 Function This function requires the interface device to cancel the electrical connection with the ICC. A.5.3 Parameter description A.5.4 Return value If the function executes successfully, the return value is 0; otherwise, the error code value is returned. A.6 Application command function A.6.1 Functions A.6.2 Function This function is used to send inter-industry exchange commands that meet the basic and special functions specified in GB/T 16649.3 to the designated card Slot the card and get the corresponding response.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of WS/T 543.5-2017_English be delivered?

Answer: Upon your order, we will start to translate WS/T 543.5-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of WS/T 543.5-2017_English with my colleagues?

Answer: Yes. The purchased PDF of WS/T 543.5-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.