HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

SN/T 4579-2016 English PDF

US$229.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
SN/T 4579-2016: Rules for the inspection of motor vehicle parts for import--Aluminum alloy wheel
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
SN/T 4579-2016English229 Add to Cart 3 days [Need to translate] Rules for the inspection of motor vehicle parts for import--Aluminum alloy wheel Valid SN/T 4579-2016

PDF similar to SN/T 4579-2016


Standard similar to SN/T 4579-2016

GB/T 5909   GB/T 5334   GB 5180   

Basic data

Standard ID SN/T 4579-2016 (SN/T4579-2016)
Description (Translated English) Rules for the inspection of motor vehicle parts for import--Aluminum alloy wheel
Sector / Industry Commodity Inspection Standard (Recommended)
Classification of Chinese Standard T22
Word Count Estimation 10,117
Date of Issue 2016-08-23
Date of Implementation 2017-03-01
Regulation (derived from) State-Quality-Inspection-Certification (2016)438
Issuing agency(ies) General Administration of Customs

SN/T 4579-2016: Rules for the inspection of motor vehicle parts for import--Aluminum alloy wheel

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rules for the inspection of motor vehicle parts for import--Aluminum alloy wheel China's entry-exit inspection and quarantine industry standards Inspection rules for imported auto parts Published on.2016-08-23 2017-03-01 Implementation China The State Administration of Quality Supervision, Inspection and Quarantine issued

Foreword

This standard follows the basic requirements for GB/T 1.1-2009 and SN/T 0002.1-2012 “Import and Export Electromechanical Products Inspection Regulations” The requirements are written. This standard is proposed and managed by the National Certification and Accreditation Regulatory Commission. This standard was drafted by. Liaoning Entry-Exit Inspection and Quarantine Bureau of the People's Republic of China and Guangdong Entry-Exit Inspection Inspection Epidemic Bureau. The main drafters of this standard. Li Shiyang, Li Chengming, Cui Yong, Yue Dapeng, Liu Bin, Xiong Changliang, Liu Chunmei, Zhou Qi, Li Hao. Inspection rules for imported auto parts

1 Scope

This standard specifies the sampling, inspection, determination of results, and disposal of aluminum alloy wheels for imported automobiles. This standard applies to the inspection of imported automotive aluminum alloy wheels. Other applicable wheels can be referred to for implementation.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article Pieces. For undated references, the latest version (including all amendments) applies to this document. GB/T 2828.2 Counting sampling inspection procedures Part 2. Sampling plans for isolated batch inspections searched by limit quality (LQ) GB/T 2933 Terms and specifications and signs for wheels and rims for pneumatic tyres GB/T 3487 Passenger Car Wheel Specification GB/T 5334-2005 Passenger car wheel performance requirements and test methods GB/T 5909-2009 Commercial vehicle wheel performance requirements and test methods GB/T 9769-2015 rim contour detection GB/T 15704-2012 Light Alloy Wheel Impact Test Method for Road Vehicles

3 Terms and Definitions

The following terms and definitions apply to this document. 3.1 Inspection lot inspectionlot In the same inspection batch, the same specification product produced under the same conditions is an inspection lot. 3.2 Wheel wheel Rotary carrier between tire and axle. Usually consists of two main parts. rims and spokes. The rims and spokes can be integral. Permanently attached or detachable. 3.3 Wheel rim Parts of the wheel that mount and support the tire. 3.4 Spoke disc The support between the axle and the rim on the wheel. 3.5 Disc wheel discwheel Wheels and spokes are permanently attached to the wheels.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of SN/T 4579-2016_English be delivered?

Answer: Upon your order, we will start to translate SN/T 4579-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of SN/T 4579-2016_English with my colleagues?

Answer: Yes. The purchased PDF of SN/T 4579-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.