|
US$229.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
SN/T 3701.11-2015: Technical requirements for the inspection of used electrical mechanical products for import--Part 11: Injection moulding machines for rubber and plastics
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| SN/T 3701.11-2015 | English | 229 |
Add to Cart
|
3 days [Need to translate]
|
Technical requirements for the inspection of used electrical mechanical products for import--Part 11: Injection moulding machines for rubber and plastics
| Valid |
SN/T 3701.11-2015
|
PDF similar to SN/T 3701.11-2015
Basic data | Standard ID | SN/T 3701.11-2015 (SN/T3701.11-2015) | | Description (Translated English) | Technical requirements for the inspection of used electrical mechanical products for import--Part 11: Injection moulding machines for rubber and plastics | | Sector / Industry | Commodity Inspection Standard (Recommended) | | Classification of Chinese Standard | G95 | | Word Count Estimation | 10,166 | | Date of Issue | 2015-02-09 | | Date of Implementation | 2015-09-01 | | Regulation (derived from) | State-Quality-Inspection-Accreditation [2015] 59 | | Issuing agency(ies) | General Administration of Customs | SN/T 3701.11-2015: Technical requirements for the inspection of used electrical mechanical products for import--Part 11: Injection moulding machines for rubber and plastics
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Technical requirements for the inspection of used electrical mechanical products for import--Part 11. Injection moulding machines for rubber and plastics
China's entry-exit inspection and quarantine industry standards
Inspection Technical Requirements for Imported Used Electromechanical Products
Part 11. Injection Molding Machine
mechanicalproductsforimport-Part 11.Injectionmoulding
Published on.2015-05-26
2016-01-01 Implementation
China
The State Administration of Quality Supervision, Inspection and Quarantine issued
Foreword
SN/T 3701 "Inspection Technical Requirements for Imported Used Electromechanical Products" is divided into 12 parts.
--- Part 1. Continuous freight lifting, conveyors;
---Part 2. Machines for processing and processing leather and leather;
---Part 3. Electroplating, electrolysis or electrophoresis equipment and devices;
--- Part 4. Non-cutting machine tools for metal or cermets;
--- Part 5. Machine tools for stone, ceramic, concrete, asbestos cement or similar mineral materials;
--- Part 6. Earth-moving machinery;
---Part 7. Agriculture, Horticulture, and Forestry Machinery;
--- Part 8. Glass production and glass processing machines;
---Part 9. Harvesters, threshers;
--- Part 10. Forklifts;
---Part 11. Injection Molding Machines;
--- Part 12. Hydraulic excavators.
This section is Part 11 of SN/T 3701.
This part was drafted in accordance with the rules given in GB/T 1.1-2009 and complies with the requirements of SN/T 2494-2010.
Please note that some of the contents of this document may involve patents. The issuing agency of this document does not assume responsibility for identifying these patents.
This part is proposed and managed by the National Certification and Accreditation Regulatory Commission.
This section consists of the People's Republic of China Fujian Entry-Exit Inspection and Quarantine Bureau, the People's Republic of China Jiangsu Entry-Exit Inspection and Quarantine Bureau, the Chinese
The Republic of China Shenzhen Entry-Exit Inspection and Quarantine Bureau and China Institute of Metrology are responsible for drafting.
The main drafters of this section. Pan Zengrong, Ni Min, Zhou Xin, Liu Huijun, Lin Xiaohong, Wang Qiyong, Zheng Jiahui.
Inspection Technical Requirements for Imported Used Electromechanical Products
Part 11. Injection Molding Machine
1 Scope
This part of SN/T 3701 specifies the inspection technical requirements for imported injection molding machines.
This section applies to pre-shipment inspection and arrival inspection of imported injection molding machines.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
GB 5226.1-2008 Electrical equipment for mechanical electrical safety machinery Part 1. General technical conditions
GB/T 13306-2011 Signage
GB/T 15706-2012 General principles of mechanical safety design risk assessment and risk reduction
GB 16297 Integrated emission standards for air pollutants
GB/T 16754-2008 Mechanical Safety Emergency Stop Design Principle
GB 22530-2008 Rubber Plastic Injection Molding Machine Safety Requirements
3 Terms and Definitions
The definitions of GB 22530-2008 and the following terms and definitions apply to this document.
3.1
Injection molding machine injectionmouldingmachines
A machine that uses a thermoplastic, a thermosetting plastic, a thermoplastic rubber, or a rubber compound as a raw material to intermittently produce a molded product. increase
The molding material is injected through a nozzle into a mold containing a cavity for material formation.
NOTE. See EN 289 if plasticized material is not injected into the mould through a nozzle. An injection molding machine generally includes one or more jigs.
One or more plasticizing and/or injection units, drive and control systems.
4 Technical requirements
4.1 General requirements
Imported old injection molding machines should comply with Chinese laws, administrative regulations (see Appendix A) and technical specifications for safety, health, environmental protection, and energy
Mandatory requirements for efficiency. Technical performance and other items, requirements of the contract should also meet the requirements of the contract. At the same time, it should also be imported
Product technical documents are consistent.
4.2 Safety requirements
4.2.1 Logo Information Requirements
4.2.1.1 The random documents of the old injection molding machine indicate that they shall meet the requirements of 7.1 in GB 22530-2008.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of SN/T 3701.11-2015_English be delivered?Answer: Upon your order, we will start to translate SN/T 3701.11-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of SN/T 3701.11-2015_English with my colleagues?Answer: Yes. The purchased PDF of SN/T 3701.11-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|