|
US$199.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
SN/T 1325.1-2003: Determination of mercury content of barites for import and export. Cold atomic absorption spectrometric method
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| SN/T 1325.1-2003 | English | 199 |
Add to Cart
|
3 days [Need to translate]
|
Determination of mercury content of barites for import and export. Cold atomic absorption spectrometric method
| Valid |
SN/T 1325.1-2003
|
PDF similar to SN/T 1325.1-2003
Standard similar to SN/T 1325.1-2003 GB/T 1870 GB/T 1873 GB/T 1868 SN/T 4374 Basic data | Standard ID | SN/T 1325.1-2003 (SN/T1325.1-2003) | | Description (Translated English) | Determination of mercury content of barites for import and export. Cold atomic absorption spectrometric method | | Sector / Industry | Commodity Inspection Standard (Recommended) | | Classification of Chinese Standard | D51 | | Word Count Estimation | 6,677 | | Date of Issue | 2003-08-18 | | Date of Implementation | 2004-02-01 | | Quoted Standard | GB/T 6682; JJG 694 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People Republic of China | | Summary | This standard specifies the import and export of mercury barite cold vapor atomic absorption spectrometric method. This standard applies to imports of mercury in barite content. In the range of 0. 00001% 0. 00016%. | SN/T 1325.1-2003: Determination of mercury content of barites for import and export. Cold atomic absorption spectrometric method
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Determination of mercury content of barites for import and export.Cold atomic absorption spectrometric method
People's Republic of China Entry-Exit Inspection and Quarantine Industry Standard
Determination of mercury content in import and export barite
Cold atomic absorption spectrometry
Released on.2003-08-18
2004-02-01 implementation
People's Republic
The General Administration of Quality Supervision, Inspection and Quarantine issued
Foreword
Appendix A of this section is an informative annex.
This part is proposed and managed by the National Certification and Accreditation Administration.
This section drafted by. Guangxi Entry-Exit Inspection and Quarantine Bureau of the People's Republic of China.
The main drafters of this section. Wang Jingling, Zhong Hanpeng.
This section is the first industry standard for entry-exit inspection and quarantine.
Determination of mercury content in import and export barite
Cold atomic absorption spectrometry
1 Scope
This standard specifies the method for the determination of mercury in imported and exported barite by cold atomic absorption spectrometry.
This standard applies to the determination of mercury content in import and export barite. The range is from 0.00001% to 0.00016%.
2 Normative references
The terms in the following documents become the terms of this standard by reference to this standard. All dated references, followed by all
Modifications (not including errata content) or revisions do not apply to this standard, however, parties to agreements based on this standard are encouraged to study
Is it possible to use the latest version of these files? For undated references, the latest edition applies to this standard.
GB/T 6682 laboratory water specifications and test methods
JJG694 Atomic Absorption Spectrophotometer Calibration Procedure
3 Method summary
The sample was leached with hydrochloric acid-nitric acid, and the ionic mercury was reduced to an atomic state (mercury vapor) with sodium borohydride in a strongly acidic medium. Due to mercury
The vapor has a strong absorption effect on the resonance line with a wavelength of 253.7 nm, and is introduced into the quartz tube with argon as a carrier for cold atomic absorption.
Determination. Within a certain concentration range, the absorption value is proportional to the mercury content, which is compared with the mercury standard series to determine the mercury content.
4 reagents and materials
Unless otherwise stated, only the identified premium grade reagents were used in the analysis and the test waters met the requirements of GB/T 6682.
4.1 Mercury chloride. The mass fraction is above 99.9%.
4.2 Sodium hydroxide.
4.3 The mass fraction is 0.5% sodium hydroxide solution. Weigh 0.50g sodium hydroxide (4.2) in a 100mL volumetric flask and dilute to the water with water.
Degree, shake well.
4.4 Sodium borohydride.
4.5 Mass fraction of 0.5% sodium borohydride solution. Weigh 0.50 g of sodium borohydride (4.4) and place it in (4.3) and mix.
4.6 Hydrochloric acid (ρ = 1.19 g/mL).
4.7 Hydrochloric acid (1+11).
4.8 Nitric acid (ρ = 1.42 g/mL).
4.9 Nitric acid (1+9).
4.10 Potassium permanganate solution (mass fraction 5%).
4.11 Mercury standard stock solution. Accurately weigh 1.3540g of mercury chloride (4.1) dried in a sulfuric acid dryer for 24h in a 250mL beaker
In the process, carefully add 15mL hydrochloric acid (4.6) and 5mL nitric acid (4.8), placed on the steam bath, completely dissolved, cooled, moved into the pre-added two drops
In a 100 mL volumetric flask of potassium permanganate solution (4.10), dilute to the mark with water and mix. 1mL of this solution contains 1.0mg of mercury and is placed on ice.
It is kept in the box and is valid for one year.
4.12 Mercury standard working stock solution. accurately transfer 1mL mercury standard stock solution (4.11), pre-added two drops of potassium permanganate solution
(4.10) and 5 mL of nitric acid (4.8) in a 100 mL volumetric flask, dilute to the mark with water and mix. 1mL of this solution contains 0.010mg of mercury.
Store in the refrigerator. Valid for one month.
4.13 Mercury standard working solution. accurately remove 10mL mercury standard working stock solution (4.12) with two drops of potassium permanganate solution beforehand.
(4.10) and 5 mL of nitric acid (4.8) in a 100 mL volumetric flask, dilute to the mark with water and mix. 1mL of this solution contains 0.001mg of mercury,
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of SN/T 1325.1-2003_English be delivered?Answer: Upon your order, we will start to translate SN/T 1325.1-2003_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of SN/T 1325.1-2003_English with my colleagues?Answer: Yes. The purchased PDF of SN/T 1325.1-2003_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|