SN/T 0960: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| SN/T 0960-2014 | English | 319 |
Add to Cart
|
3 days [Need to translate]
|
Rules for the inspection of pumps for import and export
| Obsolete |
SN/T 0960-2014
|
| SN/T 0960-2000 | English | 479 |
Add to Cart
|
4 days [Need to translate]
|
Import and Export pumps for the inspection of
| Obsolete |
SN/T 0960-2000
|
PDF similar to SN/T 0960-2014
Basic data | Standard ID | SN/T 0960-2014 (SN/T0960-2014) | | Description (Translated English) | Rules for the inspection of pumps for import and export | | Sector / Industry | Commodity Inspection Standard (Recommended) | | Classification of Chinese Standard | J71 | | Classification of International Standard | 23.100.10 | | Word Count Estimation | 8,869 | | Older Standard (superseded by this standard) | SN/T 0960-2000 | | Quoted Standard | GB 755-2008; GB 5226.1-2008; GB/T 13006; GB/T 13007; JB/T 8098-1999; SN/T 0002.1-2012 | | Regulation (derived from) | AQSIQ notification issued in 2014 on the first batch of 230 industry-standard entry-exit inspection and quarantine | | Issuing agency(ies) | General Administration of Customs | | Summary | This standard specifies the requirements for the import and export of pumps, determination of inspection and test results. This standard applies to single-stage centrifugal pump IB, light small single-stage centrifugal pumps, volute type mixed flow pumps, | SN/T 0960-2014: Rules for the inspection of pumps for import and export---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Inspection of import and export pumps)
People's Republic of China Entry-Exit Inspection and Quarantine Standards
Instead of the SN/T 0960-2000
Pumps for the inspection of import and export
Issued on. 2014-01-13
2014-08-01 implementation
People's Republic of China
The State Administration of Quality Supervision, Inspection and Quarantine released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
Instead of the standard SN/T 0960-2000 "import and export inspection of the pump." This standard compared with SN/T 0960-2000, major change
Of the following.
--- Increased inspection and supervision model and content inspection methods, and clearly specifies the requirements for different test methods of test items
Its corresponding test methods;
--- Lists the sampling pump test items, test content, test methods, substandard classification;
--- Increased by reference.
This standard is proposed and managed by the National Certification and Accreditation Administration Committee.
This standard was drafted. People's Republic of China Jiangsu Entry-Exit Inspection and Quarantine Bureau.
The main drafters of this standard. Chen Fei, Zhao Jiangsheng, Cao Jimin.
Pumps for the inspection of import and export
1 Scope
This standard specifies the requirements for the import and export of pumps, determination of inspection and test results.
This standard applies to single-stage centrifugal pump IB, light small single-stage centrifugal pumps, volute type mixed flow pumps, diffuser mixed flow pumps, small pump,
Pump, hand pump, centrifugal long axis deep well pump, small submersible pump, agricultural sewage submersible pumps and large vertical single-stage single-suction centrifugal pump
Etc., supporting the motor supply voltage 660V and below, frequency of 50Hz and 60Hz pump test.
2 Normative references
The following documents for the application of this document is essential, dated references, only the dated version suitable for use herein
Member, undated references, the latest edition (including any amendments) applies to this document.
GB 755-2008 rotating motor fixed and performance (IEC 60034-1.2004, IDT)
GB 5226.1-2008 Safety of machinery - Electrical machinery and electrical equipment - Part 1. General requirements
GB/T 13006 centrifugal, mixed flow and axial pumps NPSH
GB/T 13007 Centrifugal Pump Efficiency
Noise measurement JB/T 8098-1999 Pump and Evaluation Method
The basic provisions of SN/T 0002.1-2012 inspection of import and export of electromechanical products prepared
3 Terms and Definitions
SN/T 0002.1 and define the following terms and definitions apply to this document.
3.1
Sampling mode modeofsamplinginspection
According to the mandatory requirements of national technical specifications, batch import and export commodities or pumping grant implementation sampling, testing and inspection of conformity assessment activities.
3.2
Type Test mode modeoftypetest
According to a predetermined cycle based on national technical specifications of the mandatory requirements for the type test, according to the on-site inspection requirements for product testing,
And supervise the implementation of conformity assessment activities of the enterprise quality management system.
3.3
Compliance Verification mode modeofcomplianceverification
According to the mandatory requirements of national technical specifications, inspection certificate and inspection documents, goods are consistent with the random testing can be carried out when necessary, and real
Shi conformity assessment activities supervision.
3.4
Inspection Lot inspectionlot (s)
For the implementation of sampling together in the same models, specifications, under the same conditions of production per unit of product produced, called the inspection lot, referred to as batch.
|