|
US$139.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
SN/T 0541.3-2010: Inspecting method for import and export standard rubber. Part 3: Determination of ash content
Status: Valid SN/T 0541.3: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| SN/T 0541.3-2010 | English | 139 |
Add to Cart
|
2 days [Need to translate]
|
Inspecting method for import and export standard rubber. Part 3: Determination of ash content
| Valid |
SN/T 0541.3-2010
|
| SN/T 0541.3-1996 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Inspecting method for import and export standard rubber. Determination of ash content
| Obsolete |
SN/T 0541.3-1996
|
PDF similar to SN/T 0541.3-2010
Basic data | Standard ID | SN/T 0541.3-2010 (SN/T0541.3-2010) | | Description (Translated English) | Inspecting method for import and export standard rubber. Part 3: Determination of ash content | | Sector / Industry | Commodity Inspection Standard (Recommended) | | Classification of Chinese Standard | G42 | | Word Count Estimation | 5,570 | | Date of Issue | 2010-11-01 | | Date of Implementation | 2011-05-01 | | Older Standard (superseded by this standard) | SN/T 0541.3-1996 | | Quoted Standard | SN/T 0541.1 | | Regulation (derived from) | National Quality Inspection (2010) 582 | | Issuing agency(ies) | General Administration of Customs | | Summary | This standard specifies the export standard rubber Determination of ash content. This standard applies to export standard rubber and other natural rubber Determination of ash content. | SN/T 0541.3-2010: Inspecting method for import and export standard rubber. Part 3: Determination of ash content
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Inspecting method for import and export standard rubber Part 3. Determination of ash content
People's Republic of China Entry-Exit Inspection and Quarantine Standards
Instead of the SN/T 0541.3-1996
Import and export standard rubber test methods
Part 3. Determination of ash content
Part 3. Determinationofashcontent
Issued on. 2010-11-01
2011-05-01 implementation
People's Republic of China
The State Administration of Quality Supervision, Inspection and Quarantine released
Foreword
SN/T 0541 "Importers standard rubber test methods" is divided into five parts.
--- Part 1. Sampling and sample preparation;
--- Part 2. Determination of the initial value of the plastic and plastic retention rates;
--- Part 3. Determination of ash content;
--- Part 4. Determination of volatile matter content;
--- Part 5. Determination of nitrogen content.
This section SN/T Section 30541 of.
The partial replacement of SN/T 0541.3-1996 "Determination of the import and export standard rubber test methods ash content", and SN/T 0541.3-
Compared to 1996, the main technical difference of content.
--- Sample placed in a muffle furnace, increase with a Bunsen burner or thermostat circuit pre-heating steps and canceled wrapped with filter paper
step.
--- Original method of weighing accuracy 0.0002g changed to 0.1mg.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This section proposed and managed by the National Certification and Accreditation Administration Committee.
This section was drafted by. People's Republic of China Shandong CIQ.
The main drafters of this section. Lin Yu Fei, Liu Xiaomin, Wang Yan, Sun Jian, Hu Xiaojie, Zhang Shao Yan, Fei.
Import and export standard rubber test methods
Part 3. Determination of ash content
1 Scope
SN/T 0541 provisions of this part of the determination of the import and export standard rubber ash content.
This section applies to the import and export standard rubber and other natural rubber measurement of ash content.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
SN/T 0541.1 and export standard rubber test methods - Part 1. Sampling and Sample Preparation
3 Method summary
The sample was weighed into a crucible and heated in an electric furnace thermostat (or Bunsen burner) on. To be volatile decomposition products Yat go after placed in a muffle furnace
Heated until the carbon-containing material is completely burned, and achieve consistent quality.
4 Equipment
4.1 Analysis of balance. weighing accuracy 0.1mg.
4.2 Muffle furnace. capable of controlling the air flow through the furnace, with the temperature control device, so that the furnace temperature is maintained at 550 ℃ ± 25 ℃.
4.3 porcelain crucible. 50mL.
4.4 asbestos. 100mm × 100mm, thickness 5mm, has opened a center to put a porcelain crucible (4.3) of the hole, so that a porcelain crucible portion approximately 2/3
Under this board.
4.5 Bunsen burner or an electric furnace thermostat.
5 Sampling and sample preparation
According to the method SN/T 0541.1 defined sampling and test sample preparation.
Step 6 Analysis
Clean porcelain crucible placed in a muffle furnace and heated for about 30min, temperature of 550 ℃ ± 25 ℃, till the constant weight, then put in the dryer
Cooling to room temperature, weighed out (M1), to the nearest 0.1mg.
Said homogenized learn standard rubber sample about 5g, weighed (m2), accurate to 0.1mg, placed in a porcelain crucible above, put in asbestos
on. Where appropriate exhaust ventilation hood, electric stove with thermostat (or Bunsen burner) slowly heating the crucible to avoid sample fire. If the sample due to spills or
The overflow losses, must re-operate the above-described steps.
After the rubber decomposition carbonization, the temperature gradually increased until the volatile decomposition products in time to make basic, leaving only dry carbonized residue. It will be filled with residue
|