SN/T 0504: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| SN/T 0504-2012 | English | 439 |
Add to Cart
|
3 days [Need to translate]
|
Rules for inspection of locks for import and export. General requirements
| Obsolete |
SN/T 0504-2012
|
| SN/T 0504-1995 | English | 439 |
Add to Cart
|
4 days [Need to translate]
|
Rules for inspection of locks for export
| Obsolete |
SN/T 0504-1995
|
PDF similar to SN/T 0504-2012
Standard similar to SN/T 0504-2012 SN/T 3879 QB/T 3826 QB/T 1924 SN/T 4511 Basic data | Standard ID | SN/T 0504-2012 (SN/T0504-2012) | | Description (Translated English) | Rules for inspection of locks for import and export. General requirements | | Sector / Industry | Commodity Inspection Standard (Recommended) | | Classification of Chinese Standard | Y73 | | Word Count Estimation | 11,169 | | Older Standard (superseded by this standard) | SN/T 0504-1995 | | Quoted Standard | GB/T 2828.1; QB 1001-2006; QB 1621-1992; QB 1918-1993; QB/T 2473-2000; QB/T 2474-2000; QB/T 2475-2000; QB/T 2476-2000; SN/T 0002 | | Regulation (derived from) | National Quality Inspection (2012) 643; industry standard filing Notice 2013 No. 1 (No. 157 overall) | | Issuing agency(ies) | General Administration of Customs | | Summary | This standard specifies requirements for import and export locks sampling, testing and results of determination. This standard applies to import and export door locks, bicycle locks, furniture locks and marbles marbles padlock import and export inspection | SN/T 0504-2012: Rules for inspection of locks for import and export. General requirements---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rules for inspection of locks for import and export.General requirements
People's Republic of China Entry-Exit Inspection and Quarantine Standards
Instead of the SN/T 0504-1995
General requirements for the inspection of import and export Locks
Issued on. 2012-10-23
2013-05-01 implementation
People's Republic of China
The State Administration of Quality Supervision, Inspection and Quarantine released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
Instead of the standard SN/T 0504-1995 "export inspection of locks."
This standard compared with SN/T 0504-1995, the main technical changes are as follows.
--- Standard GB 8385 "exterior double bolt lock" Adjust for QB/T 2473-2000 "exterior door";
--- Standard GB 8386 "Mortise locks" Adjust for QB/T 2474-2000 "Mortise lock";
--- Standard GB 8387 "blade mortise lock" Adjust for QB/T 2475-2000 "blade mortise lock";
--- Standard GB 8388 "ball locks" Adjust for QB/T 2476-2000 "ball locks";
--- QB1001-1990 "bike locks" adjust for QB1001-2006 "bike lock."
This standard is proposed and managed by the National Certification and Accreditation Administration Committee.
This standard was drafted. People's Republic of China Guangdong CIQ.
The main drafters of this standard. Chen hair, pale Yasukuni, Wu Jinchang, Luliang Sheng, Li Jihua, Zhou Yinfang.
This standard replaces the standards previously issued as follows.
--- SN/T 0504-1995.
Introduction
"Lock the inspection of import and export," the import and export inspection work in accordance with the lock, the lock on the import and export inspection and specification play a guiding role.
With China's accession to the World Trade Organization (WTO) and the revised "People's Republic of China Import and Export Commodity Inspection Law" Import and Export Commodity Inspection
Test mode has undergone great changes, and changes in order to adapt to the situation, the state department in charge of inspection and quarantine inspection and quarantine standards organization established
system.
This standard belongs to the inspection and quarantine standards on the third floor --- categories of common standards, provides for import and export inspection and locks General requirements.
General requirements for the inspection of import and export Locks
1 Scope
This standard specifies the locks on the import and export of sampling, testing and the results of determination.
This standard applies to door import and export, import and export inspection and bicycle locks, furniture locks and marbles marbles padlock, locks Importers and other structures
The test can refer to use.
2 Normative references
The following documents for the application of this document is essential, dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan
QB1001-2006 bicycle lock
QB1621-1992 marble furniture locks
QB1918-1993 marbles padlock
QB/T 2473-2000 exterior door locks
QB/T 2474-2000 Mortise locks
QB/T 2475-2000 blade mortise lock
QB/T 2476-2000 spherical locks
The basic provisions of SN/T 0002 Electromechanical Import and Export Commodity Inspection procedures prepared
3 Terms and Definitions
GB/T 2828.1, SN/T 0002 defined by the following terms and definitions apply to this document
3.1
Sampling mode modeofsamplinginspection
According to the mandatory requirements of national technical specifications, batch import and export commodities or pumping grant implementation sampling, testing and inspection of conformity assessment activities.
3.2
Type Test mode modeoftypetest
According to a predetermined cycle in accordance with the relevant national technical specification requirements for type testing, according to the scene to examine the provisions of the product lot testing,
And supervise the implementation of conformity assessment activities of the enterprise quality management system.
3.3
Inspection Lot inspectionlot
To carry out the inspection and collection of the same specifications, models produced under the same conditions of production per unit of product, referred to as batch.
4 General requirements
4.1 Performance Requirements
Importers lock product performance should be consistent with national standards. Consider using national (regional) applicable standards and trade
|