HOME Cart(6) Quotation About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

QC/T 735-2025 English PDF

US$359.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
QC/T 735-2025: Direction handle for motorcycles and mopeds
Status: Valid

QC/T 735: Evolution and historical versions

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Status	PDF
QC/T 735-2025	English	359	Add to Cart	4 days [Need to translate]	Direction handle for motorcycles and mopeds	Valid	QC/T 735-2025
QC/T 735-2005	English	259	Add to Cart	3 days [Need to translate]	Dimensions of angle and width of direction handle for motorcycles and mopeds	Valid	QC/T 735-2005

Basic data

Standard ID	QC/T 735-2025 (QC/T735-2025)
Description (Translated English)	Direction handle for motorcycles and mopeds
Sector / Industry	Automobile & Vehicle Industry Standard (Recommended)
Classification of Chinese Standard	T84
Classification of International Standard	43.140
Word Count Estimation	18,130
Date of Issue	2025-05-09
Date of Implementation	2025-11-01
Older Standard (superseded by this standard)	QC/T 735-2005
Issuing agency(ies)	Ministry of Industry and Information Technology of the People's Republic of China

QC/T 735-2025: Direction handle for motorcycles and mopeds

---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/QCT735-2025
Automobile Industry Standards of the People's Republic of China Handlebars for motorcycles and mopeds Replaces QC/T 735-2005 Released on May 9, 2025 2025-11-01 Implementation CCS T 84 ICS 43.140 Ministry of Industry and Information Technology of the People's Republic of China issued Preface III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4-way handlebar type 4 5 Requirements 4 6 Test methods 9 7 Inspection Rules 10 8 Marking, packaging, transportation, storage 12

Preface This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document replaces QC/T 735-2005 "Dimensions of handlebar angles and widths for motorcycles and mopeds" and is compatible with QC/T 735-2005 In addition to structural adjustments and editorial changes, the main technical changes are as follows. a) Changed terms and definitions (see Chapter 3); b) Added the handlebar type (see Chapter 4); c) Added direction requirements (see Chapter 5); d) Added the direction handle test method (see Chapter 6); e) Added the direction inspection rules (see Chapter 7); f) Added direction marking, packaging, transportation and storage (see Chapter 8). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed and coordinated by the National Technical Committee for Standardization of Automotive Products (SAC/TC 114). This document was drafted by. Chongqing Loncin Motorcycle Co., Ltd., China Merchants Vehicle Inspection and Certification Technology Research Institute Co., Ltd., Shanghai Motor Vehicle Inspection and Certification Co., Ltd. Technology Research Center Co., Ltd., Linhai Co., Ltd., Zongshen Industrial Group Co., Ltd., Mingzhen Industrial Holding Group Co., Ltd., Zhejiang Tianying Motorcycle Co., Ltd. and Taizhou Juyuan New Energy Co., Ltd. The main drafters of this document are Gong Congqing, Gong Guobin, Wang Jiajia, Wang Xiaoqing, Shu Dehua, Lu Guoqing, Wang Xiaoyan, Zhou Ying, Zhang Wenxiang, and Zheng Chunsheng. The previous versions of this document and the documents it replaces are as follows. --First issued in.2005 as QC/T 735-2005; --This is the first revision. Handlebars for motorcycles and mopeds 1 Scope This document specifies the general requirements, materials, welding, surface treatment, angle and width requirements, straightness, and The requirements for diameter, knurling, static strength, inspection rules, marking, packaging, transportation and storage are described, and the test methods are described. This document applies to handlebars for motorcycles and mopeds (hereinafter referred to as "handlebars"). 2 Normative references The contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to this document. document. GB/T 699 High-quality carbon structural steel GB/T 708 Dimensions, shapes, weights and tolerances of cold-rolled steel sheets and strips GB/T 985.1 Recommended grooves for gas welding, arc welding, gas shielded welding and high energy beam welding GB/T 1766 Rating method for ageing of paints and varnishes GB/T 2828.1 Sampling procedures for inspection by attributes Part 1.Sampling plans for batch inspection based on acceptance quality limit (AQL) GB/T 3190 Chemical composition of wrought aluminum and aluminum alloys GB/T 4437.1 Aluminium and aluminium alloy hot extruded tubes Part 1.Seamless round tubes GB/T 5213 Cold-rolled low-carbon steel sheets and strips GB/T 5359.1 Terminology for motorcycles and mopeds Part 1.Vehicle types GB/T 5359.3 Terminology for motorcycles and mopeds Part 3.Dimensions of two-wheeled and three-wheeled vehicles GB/T 6403.3 Knurling GB/T 6461-2002 Rating of specimens and test pieces after corrosion testing of metal and other inorganic coatings on metal substrates GB/T 6543 Single and double corrugated cartons for transport packaging GB/T 8013.3 Anodic oxide films and organic polymer films on aluminium and aluminium alloys Part 3.Organic polymer coatings GB/T 8162 Seamless steel pipe for structural use GB/T 9797 Metallic and other inorganic coatings—Nickel, nickel-chromium, copper-nickel and copper-nickel-chromium electroplated coatings GB/T 9799 Metallic and other inorganic coatings - Treated zinc coatings on iron and steel GB/T 10125 Artificial atmosphere corrosion test Salt spray test GB/T 11253 Cold-rolled carbon structural steel sheets and strips GB/T 12967.3 Test methods for anodic oxide films and organic polymer films on aluminium and aluminium alloys Part 3.Salt spray test GB/T 12967.6 Test methods for anodic oxide films and organic polymer films on aluminium and aluminium alloys Part 6.Colour difference and appearance quality GB/T 13793 Straight seam electric welded steel pipe GB/T 15367 Names of parts for motorcycles and mopeds, two-wheelers and three-wheelers 3 Terms and Definitions The terms and definitions defined in GB/T 15367 and the following apply to this document.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of QC/T 735-2025_English be delivered?

Answer: Upon your order, we will start to translate QC/T 735-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of QC/T 735-2025_English with my colleagues?

Answer: Yes. The purchased PDF of QC/T 735-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version QC/T 735-2025?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version QC/T 735-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.